Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179247 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179246 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster |
| Placement on Vehicle | Right Front |
| Extra Description | febi Plus |
| Paired article numbers | 199070 |
| Operating Mode | Electric |
| Function | Door Lock |
| Type | Door Lock |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 97 mm |
| Number of mounting bores | 6 |
| Min. Length | 517 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 108 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 262 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 21 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Housing, oil filter |
| Type | Housing, oil filter |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (108328)
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 199071 |
| Number of Connectors / Ports | 4 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 199067 |
| Number of Connectors / Ports | 4 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Additional Information | with adjuster |
| Placement on Vehicle | Right Front |
| Vehicle Equipment 2 | for vehicles without Soft-Close-Automatic |
| Extra Description | febi Plus |
| Function | Door Lock |
| Type | Door Lock |
| Paired article numbers | 199490 |
| Number of Connectors / Ports | 10. 4 |
| Vehicle Equipment | for vehicles with keyless Entry/Go system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Function | Joint, propshaft |
| Placement on Vehicle | Rear |
| Outer diameter | 138 mm |
| Thickness | 32 mm |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Material | Plastic |
| for OE number | 06H 965 561 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 447 mm |
| Number of Teeth | 10 |
| Function | Brake Shaft, drum brake |
| Outer diameter | 110 mm |
| Screw length below head | 397 mm |
| Extra Description | febi Plus |
| Placement on Vehicle | Left |
| Rotation Direction | Clockwise rotation |
| Paired article numbers | 181571 |
| Type | Brake Shaft, drum brake |
| Internal Thread Size | M12 x 1,75 |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 110 mm |
| Number of Teeth | 10 |
| Screw length below head | 397 mm |
| Extra Description | febi Plus |
| Length | 447 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 181570 |
| Rotation Direction | Anticlockwise rotation |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Internal Thread Size | M12 x 1,75 |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180822 |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Additional Information | with rubber-metal mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber-metal mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180828 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1050 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with pre-filter |
| Additional Information | with gaskets/seals |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 98 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Diameter | 55 mm |
| Function | Slave Cylinder, engine brake |
| Pressure side external thread size | M10 x 1,5 |
| Housing length | 181.5 mm |
| Pressure side internal thread size | M12 x 1,5 |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 2 |
| Surface | Coated |
| Centering Diameter | 64 mm |
| Minimum thickness | 23 mm |
| Outer diameter | 280 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Bolt Hole Circle Diameter | 114.3 mm |
| Thickness | 47.1 mm |
| Brake Disc Thickness | 25 mm |
| Replaces | 31303 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 94 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1147 mm |
| Inner length 2 | 815 mm |
| Outer length 2 | 1110 mm |
| Inner length 1 | 853 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 35 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (21325)
- 1x Febi Bearing, propshaft centre bearing (21311)
Important compatibility info
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Thickness | 340 mm. 560 mm |
| Outer diameter | 258 mm |
| Type | Bellow, air suspension |
| Replaces | 108691 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Thread Size | M20 x 1,5 |
| Min. Length | 668 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 26 mm |
| Outer diameter | 158 mm |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 4 |
| Width | 49 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 175410 |
| External Thread Size | M14 x 1,5 |
| Material | Aluminium |
| Placement on Vehicle | Lower, Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with screw, with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174666)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Paired article numbers | 181377 |
| Steering arm type | Control Arm |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | before exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with fastening material |
| Length | 191 mm |
| Width | 87 mm |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 23 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 1 |
| Cable Length | 1600 mm |
| Type | Sensor, urea supply |
| Function | Sensor, urea supply |
| Screw length below head | 445 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 12620 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 504 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 19 mm |
| Number of Teeth | 125 |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11150)
- 1x Febi Tensioner Pulley, timing belt (04199)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (04195)
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Cooling Hose | from radiator to water pipe |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Timing Chain Size | G68HPF, G68HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, before catalytic converter |
| Spanner Size | 22 |
| Cable Length | 900 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Paired article numbers | 183678 |
| Placement on Vehicle | Lower Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2100 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 3.2 mm |
| Pressure | 362 bar |
| Function | Hose Line, driver cab tilting device |
| Internal Thread Size | M12 x 1,5 |
| Type | Hose Line, driver cab tilting device |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Door Lock, driver cab |
| Function | Door Lock, driver cab |
| Length | 106.4 mm |
| Thickness | 99.65 mm |
| Width | 39.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Sensor Ring, ABS (18612)
Important compatibility info
| Length | 90 mm |
| for OE number | 270 052 14 00 S2 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with fastening/mounting material |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (44737)
- 1x Febi Holder, timing chain tensioner (48297)
Important compatibility info
| Hole Spacing | 194 mm |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| for OE number | 1408 525 |
| Length | 234 mm |
| Additional Information 2 | with rolling bearing |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 408 mm |
| Core Width | 591 mm |
| Core Depth | 16 mm |
| Additional Information 2 | without dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Material | Aluminium |
| Core Length | 584 mm |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
| Refrigerant | R 134a |
| Core Width | 311 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Inner diameter | 30 mm |
| Width | 30 mm |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 143 mm |
| Replaces | 33570; 33671 |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32187)
- 4x Febi Centering Bolt, crankshaft pulley (33607)
Important compatibility info
| Bolt Hole Circle Diameter | 64 mm |
| Inner diameter | 29 mm |
| Outer diameter | 136 mm |
| Width | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































