Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter 1 | 72 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 78 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 140 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Outer diameter 2 | 152 mm |
| Outer diameter 1 | 62 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 28 mm |
| Width | 60 mm |
| Outer diameter | 76 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (173781)
- 1x Febi Wheel Bearing Kit (173916)
£57.21
Important compatibility info
| Cone Size | 26 mm |
| Placement on Vehicle | Front Axle |
| Adjustable | Adjustable on one side |
| Length | 865 mm |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Function | Drive Shaft |
| Transmission-side joint diameter | 74.3 mm |
| Type | Drive Shaft |
| Min. Length | 615 mm |
| External Teeth, Diff.Side | 22 |
| External Teeth, Wheel Side | 21 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Wheel Sided Joint Diameter | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Min. Length | 632 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Width | 38.5 mm |
| Outer diameter | 150 mm |
| Inner diameter | 85 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle, inner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Function | Wheel Hub |
| Inner diameter | 29.3 mm |
| Outer diameter | 154 mm |
| Thickness | 105.2 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 154 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Min. Length | 629 mm |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 93.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Width | 35 mm |
| Outer diameter | 64.7 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.20
Important compatibility info
| Brake caliper piston diameter | 57 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178183 |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178182 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.20
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.20
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Paired article numbers | 180078 |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.18
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21681 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Replaces | 22460 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 299 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| for OE number | 11 28 8 624 196 |
| Track rollers material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Sensor, headlight levelling |
| Type | Sensor, headlight levelling |
| Material | Plastic |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Material | CR (chloroprene rubber) |
| Outer diameter | 106 mm |
| Inner diameter | 100 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Hose Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (46463)
- 2x Febi Fastening Clamp, charge air hose (39028)
£57.17
Important compatibility info
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Charge Air Cooler, Right |
| Material | CR (chloroprene rubber) |
| Turbocharger line | Turbocharger to charge air cooler |
| Type | Charge Air Hose |
| Hose Length | 445 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Outer diameter 1 | 65 mm |
| Placement on Vehicle | Charge Air Cooler, Left |
| Inner diameter 1 | 55 mm |
| Outer diameter 2 | 70 mm |
| Inner diameter 2 | 60 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Turbocharger line | Piping to charge air cooler |
| Additional Information 2 | with clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear, both sides |
| External Thread Size | M16 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Paired article numbers | 109512 |
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Type | Window Regulator |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Number of Teeth | 101 |
| Width | 20 mm |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24791)
- 1x Febi Water Pump, engine cooling (26273)
£57.17
Important compatibility info
| Function | Switch, tailgate release |
| Extra Description | febi Plus |
| Colour | Black |
| Material | Plastic |
| Type | Switch, tailgate release |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| External Teeth, Diff.Side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 102689 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 102687 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.17
Important compatibility info
| Outer diameter | 74 mm |
| Number of Ribs | 10 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 32 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.16
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023