Hose & Pipe

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• Mild steel zinc protected

• Stainless Steel
• No. 304 SS Marine Grade
• Band Thickness 0.7mm
• DIN 3017

• SS Hoseclip 16-25mm

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• 304 grade stainless steel

• Mild Steel
• Zinc Plated
• Mini
• Pack of 20

• Stainless Steel
• No. 304 SS Marine Grade
• Band Thickness 0.7mm
• DIN 3017

• SS Hoseclip 90-110mm

• Push Fit Connector
• ISO9001:2008

• Stainless Steel
• No. 304 SS Marine Grade
• Band Thickness 0.7mm
• DIN 3017

• SS Hoseclip 30-45mm

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• Mild steel zinc protected

• Widely used for maintenance and OEM applications
• Mainly used on air, fluid, gas and steam lines as well as being suitable for low pressure hydraulic applications.
• Also referred to as lemon clips, double ear clips and 2-ear clips
• Absence of a screw mechanism allows 'O' clips to be used on extremely small hoses
• Tamper proof nature of the fitting is also suitable for applications where there may be a risk of interference
• Pincers (both normal & side closing) are used to crimp the ears of the clamps and affect a proper seal
• Mild steel zinc plated construction

• Mild Steel
• Zinc Plated
• For Fuel Pipes & small hoses

• Push Fit Connector
• ISO9001:2008

• 16.0mm ID x 75.0mm

• Euro Universal Female Coupling
• British Standard Pipe (BSP) Thread
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Euro Universal Male Coupling
• British Standard Pipe (BSP) Thread
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Mild Steel
• Zinc Plated
• Twin ear O Clips
• Pack of 50

• 3/8in. (8-11mm)

This roll of fuel hose from Pearl Automotive is 3.2 x 7mm. It comes in a 5m roll made from braided polyester suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Fuel hose 3.2mm inside diameter
• Made from NBR/PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• 5m roll with an outer braided covering

• DIN 73379 TYPE B