Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Rubber/Metal |
Paired article numbers | 102286 |
Function | Suspension Strut Support Mount |
Weight | 0.98 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 32.5 mm |
Thickness | 145 mm |
Weight | 0.333 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.36 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 20 mm |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.137 kg |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 183086 |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 89 mm |
Wheel Sided Joint Diameter | 98 mm |
Additional Information | with Split Pin |
Min. Length | 613 mm |
Function | Drive Shaft |
External Teeth, Diff.Side | 29 |
Weight | 7.860 kg |
External Teeth, Wheel Side | 29 |
Type | Drive Shaft |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 14 mm |
Weight | 0.52 kg |
Placement on Vehicle | Rear Axle Right |
Length | 143 mm |
Material | Steel |
Inner diameter | 12 mm |
Paired article numbers | 32574 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.240 kg |
Length | 264 mm |
Height | 20 mm |
Width | 190 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 174248 |
Placement on Vehicle | Front Axle Right |
Weight | 0.272 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Additional Information 2 | with ball bearing |
Paired article numbers | 177217 |
Weight | 1.330 kg |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (102287)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
Important compatibility info
Min. Length | 1004 mm |
Wheel Sided Joint Diameter | 98 mm |
Additional Information 2 | with nut |
Paired article numbers | 182958 |
Weight | 11.987 kg |
Thread Size | M24x1,5 |
Type | Drive Shaft |
Transmission-side joint diameter | 88.7 mm |
Additional Information | with Split Pin |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Filter type | Filter Insert |
Function | Oil Filter |
Height | 112 mm |
Outer diameter | 58 mm |
Inner diameter | 18 mm |
Seal Diameter | 68.5 mm |
Additional Information 2 | with seal ring |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 106 |
Timing Chain Size | G67HP, G67HR |
Function | Timing Chain Kit |
Weight | 1.421 kg |
Thickness | 38 mm |
Type | Timing Chain Kit |
Additional Information | with slide rails, with chain tensioner |
Extra Description | Standard Medium Kit |
Additional Information

General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30668)
- 1x Febi Tensioner, timing chain (101097)
- 1x Febi Guide, timing chain (101098)
- 1x Febi Guide, timing chain (101099)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (25470)
Important compatibility info
Weight | 0.21 kg |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Width | 70 mm |
Length | 68 mm |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Weight | 0.272 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 174247 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Weight | 1.330 kg |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Paired article numbers | 177214 |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (102286)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
External Thread Size | M24 x 1,5 |
External Teeth, Wheel Side | 29 |
Type | Joint Kit, drive shaft |
Weight | 3.180 kg |
Seal Diameter | 56 mm |
Internal Teeth, wheel side | 36 |
Length | 174 mm |
Function | Joint Kit, drive shaft |
Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Brake caliper piston diameter | 35 mm |
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181149 |
Weight | 1.282 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.097 kg |
Spanner Size | 22 |
Cable Length | 406 mm |
Number of circuits | 5 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth, ABS ring | 48 |
Placement on Vehicle | Rear Axle Left, Wheel Side, Rear Axle Right |
Length | 149 mm |
Outer diameter | 68 mm |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 24 |
Weight | 1.470 kg |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
Seal Diameter | 56 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Type | Resistor, interior blower |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Lower |
Additional Information | with rubber mounts |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 48183 |
Weight | 2.582 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Internal Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, exhaust pressure |
Weight | 0.02 kg |
Sensor Type | Differential Pressure Sensor |
Type | Sensor, exhaust pressure |
for OE number | 22 77 014 54R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | 7 PK |
Type | Belt Pulley, crankshaft |
Width | 30 mm |
Outer diameter | 163 mm |
Inner diameter | 38 mm |
Weight | 1.495 kg |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 14 mm |
Weight | 0.52 kg |
Placement on Vehicle | Rear Axle Left |
Length | 143 mm |
Material | Steel |
Inner diameter | 12 mm |
Paired article numbers | 32573 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 20 mm. 15.8 mm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Weight | 0.37 kg |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.190 kg |
Length | 236 mm |
Height | 58 mm |
Width | 165 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Length | 253 mm |
Weight | 0.080 kg |
Placement on Vehicle | Rear Axle Left, outer |
Internal Thread Size | M10 x 1 |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Placement on Vehicle | Front Axle Left |
Length | 181 mm |
Material | Steel |
Paired article numbers | 34755 |
Colour | Black |
Surface | Painted |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 21 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.56 kg |
Material | Cast Aluminium |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Water pump impeller material | Metal |
Number of Wings | 5 |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023