Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1924 mm |
| Paired article numbers | 36674 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Additional Information | with accessories |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35701)
- 1x Febi Seal, air compressor (35729)
- 1x Febi Cylinder Head Gasket, air compressor (35730)
- 1x Febi Seal Kit, multi-valve (35768)
- 2x Febi Nut (35732)
- 2x Febi Seal Kit, multi-valve (35733)
- 1x Febi Seal, air compressor (35731)
£15.05
Important compatibility info
| Joint Type | Tripod Joint |
| Length | 95 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100213)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£15.05
Important compatibility info
| Material | Steel |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | FPM (fluoride rubber) |
| Function | Repair Kit, shift cylinder |
| Type | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 20 mm |
| Function | Nut, kingpin |
| Spanner Size | 67 |
| Internal Thread Size | M52 x 1,5 |
| Bolt Head/Nut Design | Male Star |
| Type | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 2 bar |
| for OE number | 17 11 7 639 021 |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 462 mm |
| Spanner Size | 15 |
| Thread Length | 10 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 299 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod, Suspension Rod |
| Thickness | 79.1 mm |
| Paired article numbers | 104619 |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 35.5 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Outer diameter | 50 mm |
| Function | Thermostat, coolant |
| Opening Temperature | 83 °C |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Width | 8 mm |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Outer diameter | 50 mm |
| Inner diameter | 24 mm |
| Colour | Black |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
| Placement on Vehicle | frontal sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 78 mm |
| Operating Mode | Electric |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | Aluminium, ACM (Polyacrylate) |
| Function | Gasket, timing case cover |
| Type | Gasket, timing case cover |
| for OE number | 1 754 585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Voltage from | 12 V |
| Voltage to | 24 V |
| Protection Type (IP Code) | IP67 |
| Function | End Outline Marker Light |
| Port / Connector type | PRS |
| Colour | White |
| Cable Length | 500 mm |
| Fulfils ECE norm | R3, R7 |
| Type | End Outline Marker Light |
| Width | 111 mm |
| Height | 50 mm |
| Depth | 24 mm |
| Light Design | LED |
| Mounting bores distance | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Wire Brush, brake caliper cleaning |
| Type | Wire Brush, brake caliper cleaning |
| Additional Information 2 | with hook |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Height | 23 mm |
| Outer diameter | 90 mm |
| Spanner Size | 80 |
| Type | Nut, kingpin |
| Function | Nut, kingpin |
| Internal Thread Size | M73 x 1,5 |
| Material | Steel |
| Surface | Phosphatized |
| Bolt Head/Nut Design | External Hexagon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Thickness | 60 mm |
| Inner diameter | 14.5 mm |
| Outer diameter | 66 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 342 mm |
| Function | Rod, slave cylinder |
| Type | Rod, slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
| Brake Type | Disc Brake |
| Length | 590 mm |
| Number of Connectors / Ports | 2 |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 1155 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 1390 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| for OE number | 2105.50 |
| Type | Guide Sleeve, clutch |
| Function | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Spanner Size | 22 |
| Colour | White |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Internal Thread Size | M18 x 1,5 |
| Material | PU (Polyurethane) |
| Outer diameter | 109 mm |
| Colour | Yellow |
| DIN / ISO | 74323 |
| Working length | 4 m |
| Function | Spiral Hose |
| Type | Spiral Hose |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Internal Thread Size | M18 x 1,5 |
| Material | PU (Polyurethane) |
| Outer diameter | 109 mm |
| Colour | Red |
| DIN / ISO | 74323 |
| Working length | 4 m |
| Function | Spiral Hose |
| Number of Coils | 20 |
| Type | Spiral Hose |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 920 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Function | Sleeve, nozzle holder |
| Type | Sleeve, nozzle holder |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Height | 252 mm |
| Outer diameter | 113 mm |
| Inner diameter | 64 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 170 mm |
| Material | Aluminium |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.06
Important compatibility info
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (02730)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45644)
- 1x Febi Screw (03634)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi High Temperature Lubricant (03630)
£15.06
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1055 mm |
| Colour | Black, Grey, Green |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 990 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 611 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 615 mm |
| Number of Connectors / Ports | 2 |
| Function | Warning Contact, brake pad wear |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Paired article numbers | 180468 |
| Function | Cable Pull, parking brake |
| Length | 1520 mm |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Placement on Vehicle | outer |
| Length | 110 mm |
| Width | 60 mm |
| Material | Rubber/Metal |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 1055 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 287 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M16 x 1, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 105 mm |
| Pipe Diameter | 30 mm |
| Cone Size | 20 mm |
| Thread Type | with right-hand thread |
| External Thread Size | M16 x 1,5, M24 x 1,5 RHT |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Outer diameter | 10 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 264 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 29.2 mm |
| DIN / ISO | 985 |
| Rod/Strut | Coupling Rod |
| Thickness | 65 mm |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Length | 1136 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Length | 193 mm |
| Thickness | 70 mm |
| Spanner Size | 21, 17 |
| Paired article numbers | 21491 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.08
Important compatibility info
| Length | 333 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information 2 | with clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (23227)
- 1x Febi Nut (02685)
- 1x Febi Fastening Clamp (36796)
£15.08
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 46 |
| Timing Chain Size | G67WZ |
| Function | Chain, oil pump drive |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.08
Important compatibility info
| Filter type | Pre-Filter |
| Function | Fuel filter |
| Height | 41 mm |
| Outer diameter | 50 mm |
| Additional Information | with fastening/mounting material |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.08
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 114.1 mm |
| Width | 50 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.08
Important compatibility info
| Length | 1200 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.08
Important compatibility info
| Additional Information | with axle nut |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Width | 33 mm |
| Function | Wheel Bearing Kit |
| Outer diameter | 72 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.09
Important compatibility info
| Material | Sheet Steel |
| Thickness | 150 mm |
| Length | 260 mm |
| Width | 120 mm |
| Radius | 360 mm |
| Function | Wheel Chock |
| Surface | Zinc-coated |
| DIN / ISO | 76051 |
| Type | Wheel Chock |
| Additional Information 2 | Handle in housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.09
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 405 mm |
| Housing Diameter | 18 mm |
| Eject Force | 270 N |
| Stroke | 162 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Colour | black |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.09
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023