Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Steel |
| Spanner Size | E14 |
| Thread Length | 85 mm |
| Bolt Head/Nut Design | Male Torx |
| Function | Cylinder Head Bolt |
| Screw length below head | 124 mm |
| Length | 136 mm |
| External Thread Size | M12 x 1,5 |
| Number of screws | 10 |
| Type | Cylinder Head Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
| for OE number | 102 052 14 16 |
| Placement on Vehicle | Cylinder Head, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Height | 87 mm |
| Outer diameter | 68 mm |
| Filter type | Spin-on Filter |
| Internal Thread Size | 3/4" - 16 UNF |
| Function | Oil Filter |
| Seal Diameter | 61.5 mm |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Height | 18 mm |
| Type | Seal Ring, injector |
| Outer diameter | 29 mm |
| Inner diameter | 19 mm |
| Function | Seal Ring, injector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Internal Thread Size | 3/4" - 16 UNF |
| Height | 62 mm |
| Outer diameter | 76 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Function | Mounting, stabiliser bar |
| Thickness | 43 mm |
| Inner diameter | 24 mm |
| Material | Rubber |
| Length | 45 mm |
| Width | 35 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 75 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Thread Length | 55 mm |
| Quality/ Grade | 10.9 |
| Shaft Length | 21 mm |
| Length | 92 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle, Rear Axle |
| Bolt Head Diameter | 32 mm |
| Surface | Phosphatized |
| External Thread Size | M22 x 1,5 |
| Function | Wheel Stud |
| Screw length below head | 81 mm |
| Type | Wheel Stud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
| Material | ACM (Polyacrylate) |
| Outer diameter | 65 mm |
| Inner diameter | 50 mm |
| Height | 8 mm |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Height | 60 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
| Inner diameter | 28 mm |
| Filter type | Filter Insert |
| Outer diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 165 mm |
| Material | Rubber |
| Inner diameter 1 | 41 mm |
| Inner diameter 2 | 52 mm |
| Function | Bellow, steering |
| Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.35
Important compatibility info
| Length | 81 mm |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 62 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.35
Important compatibility info
| Outer diameter | 123.6 mm |
| Inner diameter | 113.3 mm |
| Pipe Connector | Pipe Clamp |
| Function | Pipe Connector, exhaust system |
| Type | Pipe Connector, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.35
Important compatibility info
| Function | Protective Cap/Bellow, shock absorber |
| Material | PP (Polypropylene) |
| Width | 59 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 180 mm |
| Type | Protective Cap/Bellow, shock absorber |
| Replaces | 19288; 38358; 38637 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.35
Important compatibility info
| Inner diameter | 18 mm |
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.36
Important compatibility info
| Placement on Vehicle | inner |
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| for OE number | 11 12 1 735 721 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 23.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.36
Important compatibility info
| Height | 34 mm |
| Outer diameter | 37 mm |
| Inner diameter | 16 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.36
Important compatibility info
| Inner diameter | 20 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.36
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Mounting, stabiliser bar |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023