Important compatibility info
| Function | Bellow Kit, steering |
| Material | Thermoplast |
| Length | 148 mm |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 48 mm |
| Type | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Inner Tie Rod |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 390 mm |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Front |
| Length 1 | 2583 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Important compatibility info
| Material | Plastic |
| for OE number | 030 121 117 N |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Length 1 | 1230 mm |
| Function | Accelerator Cable |
| Type | Accelerator Cable |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | excl. wear warning contact |
| Number of Clips | 4 |
| Brake System | Lucas - Girling |
| Thickness/Strength 1 | 17.9 mm |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 68.6 mm |
| Width 1 | 129.1 mm |
| Number of threaded bolts | 4 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Fuel filter |
| Outlet Diameter | 10 mm |
| Inlet Diameter | 10 mm |
| Filter type | with connection for water sensor |
| Outer diameter | 98 mm |
| Height | 129 mm |
| Type | Fuel filter |
Important compatibility info
| Length 1 | 2035 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Cone Size | 30 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Thread Type | with right-hand thread |
| Thread Measurement 2 | M24X1.5 |
| Thread Measurement 1 | M26X1.5 |
| Length | 80 mm |
Important compatibility info
| Material | Thermoplast |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
| Length | 124 mm |
| Inner diameter 2 | 70 mm |
| Inner diameter 1 | 25 mm |
Important compatibility info
| Function | Inner Tie Rod |
| Axle Joint Length | 239 mm |
| Type | Inner Tie Rod |
| Thread Measurement 2 | M12x1.25 |
| Thread Measurement 1 | M14x1.5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Placement on Vehicle | Centre |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 2 | 1752 mm |
| Length 1 | 3050 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Thread Size | M10x1 |
| Thread Type | with internal thread |
| Length 1 | 551 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Thread Measurement 2 | M10x1 |
| Additional Information | with banjo fitting |
| Length | 547 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Inner diameter | 15 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 34 mm |
| Function | Charge Air Hose |
| Material | Polychloroprene (Neoprene) |
| Type | Charge Air Hose |
| Inner diameter 1 | 34 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1104S)
Important compatibility info
| Bearing Code | Gen 1 |
| Inner diameter 1 | 42 mm |
| Outer diameter 1 | 80 mm |
| Width 1 | 46 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Thread Size | M10x1 |
| Type | Brake Hose |
| Length | 558 mm |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Additional Information | with banjo fitting |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Right |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















