Proud to be a UK-based company
Contact us
Important compatibility info
| Replaces | 08136 |
| Weight | 0.712 kg |
| Placement on Vehicle | Upper Front Axle, Lower Front Axle |
| External Thread Size | M18 x 1,5 |
| Function | Ball Joint |
| Cone Size | 19.6 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Paired article numbers | 06641 |
| Placement on Vehicle | Front Axle Left |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Weight | 0.580 kg |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.15 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 145 mm |
| Material | Thermoplast |
| Inner diameter 1 | 28 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22088)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 184 mm |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22018)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.184 kg |
| Placement on Vehicle | Front Axle, Rear |
| Outer diameter | 85 mm. 72 mm |
| Thickness | 51 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Paired article numbers | 22021 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.330 kg |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Number of Ribs | 6 |
| Length | 1803 mm |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Weight | 0.184 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.570 kg |
| Paired article numbers | 06625 |
| Placement on Vehicle | Front Axle Right |
| Thread Type | with right-hand thread |
| Internal Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant level |
| Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 71 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.210 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (27098)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (27101)
- 1x Febi Circlip (24036)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.525 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10874)
- 1x Febi Suspension Strut Support Mount (10873)
- 1x Febi Nut (10893)
£16.04
Important compatibility info
| Paired article numbers | 22020 |
| Weight | 0.330 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Weight | 0.075 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Bolt Head/Nut Design | Male Hex |
| Weight | 0.64 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Cone Size | 18 mm |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 116 mm |
| Paired article numbers | 104873 |
| Function | Tie Rod End |
| Weight | 0.738 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.294 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 140 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100039)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 1.06 kg |
| Placement on Vehicle | Rear Axle |
| Length | 116 mm |
| Width | 44 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Replaces | 170626 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.210 kg |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 587 mm |
| Outer diameter | 10 mm |
| Function | Cable Pull, parking brake |
| Paired article numbers | 34909 |
| Weight | 0.180 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Inner Tie Rod |
| Length | 234 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Weight | 0.45 kg |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.42 kg |
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 09604 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Weight | 0.05 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.250 kg |
| Cooling Hose | from engine to engine cooler |
| Placement on Vehicle | Upper |
| Function | Radiator Hose |
| Hose Length | 210 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 22514 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Additional Information | with lock nut |
| Weight | 0.460 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.110 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 100.8 mm |
| Outer diameter | 22.35 mm. 12.05 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.09 kg |
| Width | 17 mm |
| Number of Teeth | 113 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.341 kg |
| Height | 110 mm. 157 mm |
| Outer diameter | 80 mm |
| Number of Connectors / Ports | 2 |
| Function | Fuel filter |
| Filter type | In-Line Filter, with water separator |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Outer diameter | 14 mm |
| Inner diameter | 7 mm |
| Cooling Hose | from engine cooler to expansion tank |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Weight | 0.175 kg |
| Hose Length | 550 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.106 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 105 mm |
| Outer diameter | 70 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.816 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 02672 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Length | 550 mm |
| Function | Gasket Set, cylinder head cover |
| Width | 307 mm |
| Weight | 0.07 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.241 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 118 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48811)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Material | Plastic |
| Colour | red/brown |
| Function | Hazard Warning Light Switch |
| Number of Connectors / Ports | 4 |
| Weight | 0.1 kg |
| Housing Colour | Black |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Control Type | Button Actuation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Plastic |
| Weight | 0.024 kg |
| Opening Pressure | 1.08 bar |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 1358 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Weight | 0.2 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 17 |
| Thread Length | 12.6 mm |
| Length | 370 mm |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Weight | 0.132 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.285 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 54 mm |
| Thickness | 87 mm |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.086 kg |
| Placement on Vehicle | Right |
| Material | Plastic |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Piston Diameter | 25.4 mm |
| Weight | 0.590 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.061 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 919 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Width | 40 mm |
| Material | Plastic |
| Outer diameter | 60 mm |
| Inner diameter | 13 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.359 kg |
| Additional Information 2 | with screw |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.23 kg |
| Length | 2255 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.070 kg |
| Placement on Vehicle | Right |
| Material | Rubber |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | FPM (fluoride rubber), PTFE (polytetrafluoroethylene) |
| Function | Repair Kit, air compressor |
| Type | Repair Kit, air compressor |
| Weight | 0.035 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 116 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 81 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Weight | 0.209 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48806)
- 1x Febi Clamping Clip (03597)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Weight | 0.060 kg |
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Weight | 0.070 kg |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.13 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.416 kg |
| Type | Bellow Kit, drive shaft |
| Length | 93 mm |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100215)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45644)
- 3x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 145 mm |
| Material | Steel |
| Paired article numbers | 32603 |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.29 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023