Proud to be a UK-based company
Contact us
Important compatibility info
| Piston Diameter | 25.4 mm |
| Weight | 0.590 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.2 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 128 mm |
| Material | Thermoplast |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 85 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.624 kg |
| Placement on Vehicle | Left Rear |
| Length | 1670 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Paired article numbers | 18116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.35 kg |
| Placement on Vehicle | both sides |
| Length | 508 mm |
| Housing Diameter | 18 mm |
| Eject Force | 620 N |
| Stroke | 180 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 297.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Width | 40 mm |
| Material | Plastic |
| Outer diameter | 60 mm |
| Inner diameter | 13 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.359 kg |
| Additional Information 2 | with screw |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.37 kg |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.242 kg |
| Material | Rubber/Metal |
| Outer diameter | 56 mm |
| Thickness | 71 mm |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Rear, Lower, inner, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Type | Coolant Control Valve |
| Weight | 0.101 kg |
| Function | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 1358 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Weight | 0.2 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 20 mm |
| Outer diameter | 164 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.3 mm |
| Function | Brake Shoe Set, parking brake |
| Weight | 0.82 kg |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.22 kg |
| Function | Cover, timing belt |
| Type | Cover, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 184 mm |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22018)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.086 kg |
| Placement on Vehicle | Right |
| Material | Plastic |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 587 mm |
| Outer diameter | 10 mm |
| Function | Cable Pull, parking brake |
| Paired article numbers | 34909 |
| Weight | 0.180 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 1.2 kg |
| Length | 377 mm |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.540 kg |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Plastic |
| Outer diameter | 67 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Mounting points diameter | 17 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.150 kg |
| Width of castor bearing surface | 25 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 1.370 kg |
| Placement on Vehicle | Front Axle |
| Length | 124.1 mm |
| Width | 57.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 116 mm |
| Paired article numbers | 104873 |
| Function | Tie Rod End |
| Weight | 0.738 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.23 kg |
| Length | 2255 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.452 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Left |
| Material | Rubber |
| Type | Gasket, cylinder head cover |
| Weight | 0.065 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Fuel Hose |
| Type | Fuel Hose |
| Weight | 0.028 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 193017 |
| Number of Connectors / Ports | 2 |
| Weight | 0.046 kg |
| Cable Length | 540 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.070 kg |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.13 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 107 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 71 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.259 kg |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100400)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Function | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 15.9 mm |
| Weight | 0.26 kg |
| Material | Grey Cast Iron |
| Internal Thread Size | M6 x 1, M10 x 1 |
| Type | Wheel Brake Cylinder |
| Additional Information | with pressure pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.816 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 02672 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.11 kg |
| Width | 21 mm |
| Number of Teeth | 110 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 1.201 kg |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09401)
- 1x Febi Rolling Bearing, suspension strut support mount (10089)
- 1x Febi Spring Seat (14941)
£16.04
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.42 kg |
| Function | Wheel Bearing Kit |
| Width 2 | 15.5 mm |
| Outer diameter 2 | 45 mm |
| Width 1 | 17.5 mm |
| Outer diameter 1 | 68 mm |
| Inner diameter 2 | 19 mm |
| Inner diameter 1 | 41 mm |
| Additional Information 2 | with shaft seal |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (06840)
- 1x Febi Nut, kingpin (02229)
£16.04
Important compatibility info
| Weight | 0.050 kg |
| Notches / Holes Number | 1 |
| Function | Exhaust Valve |
| Valve head diameter | 29.9 mm |
| Length | 106.7 mm |
| Valve stem diameter | 6 mm |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Weight | 0.075 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 116 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 81 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Weight | 0.209 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48806)
- 1x Febi Clamping Clip (03597)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Material | FPM (fluoride rubber), PTFE (polytetrafluoroethylene) |
| Function | Repair Kit, air compressor |
| Type | Repair Kit, air compressor |
| Weight | 0.035 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 193016 |
| Number of Connectors / Ports | 2 |
| Weight | 0.046 kg |
| Cable Length | 540 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.091 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 970 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.15 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 145 mm |
| Material | Thermoplast |
| Inner diameter 1 | 28 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22088)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.525 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10874)
- 1x Febi Suspension Strut Support Mount (10873)
- 1x Febi Nut (10893)
£16.04
Important compatibility info
| Bolt Head/Nut Design | Male Hex |
| Weight | 0.64 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Cone Size | 18 mm |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Plastic |
| Colour | red/brown |
| Function | Hazard Warning Light Switch |
| Number of Connectors / Ports | 4 |
| Weight | 0.1 kg |
| Housing Colour | Black |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Control Type | Button Actuation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Cable Length | 740 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.241 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 118 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48811)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Weight | 0.31 kg |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 240 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 41197 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.418 kg |
| Length | 75 mm |
| Outer diameter | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Inner Tie Rod |
| Length | 234 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Weight | 0.45 kg |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 187 mm |
| Paired article numbers | 48067 |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Weight | 0.532 kg |
| External Thread Size | M18 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.106 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 105 mm |
| Outer diameter | 70 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Inner diameter | 44 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 98 mm |
| Weight | 0.280 kg |
| Height | 253 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023