Proud to be a UK-based company
Contact us
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.42 kg |
| Function | Wheel Bearing Kit |
| Width 2 | 15.5 mm |
| Outer diameter 2 | 45 mm |
| Width 1 | 17.5 mm |
| Outer diameter 1 | 68 mm |
| Inner diameter 2 | 19 mm |
| Inner diameter 1 | 41 mm |
| Additional Information 2 | with shaft seal |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (06840)
- 1x Febi Nut, kingpin (02229)
£16.04
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Length | 550 mm |
| Function | Gasket Set, cylinder head cover |
| Width | 307 mm |
| Weight | 0.07 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.242 kg |
| Material | Rubber/Metal |
| Outer diameter | 56 mm |
| Thickness | 71 mm |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Rear, Lower, inner, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 1358 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Weight | 0.2 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.09 kg |
| Width | 17 mm |
| Number of Teeth | 113 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.184 kg |
| Placement on Vehicle | Front Axle, Rear |
| Outer diameter | 85 mm. 72 mm |
| Thickness | 51 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Inner diameter | 44 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 98 mm |
| Weight | 0.280 kg |
| Height | 253 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.525 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10874)
- 1x Febi Suspension Strut Support Mount (10873)
- 1x Febi Nut (10893)
£16.04
Important compatibility info
| Function | Fuel Hose |
| Type | Fuel Hose |
| Weight | 0.028 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.374 kg |
| Placement on Vehicle | Front Axle Left, transmission sided |
| Length | 110 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 100 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (07707)
- 1x Febi Shaft Seal, drive shaft (05238)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Weight | 0.535 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 296 mm |
| Housing Diameter | 19 mm |
| Eject Force | 480 N |
| Stroke | 81 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 192 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.125 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 17 |
| Thread Length | 12.6 mm |
| Length | 370 mm |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Weight | 0.132 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant level |
| Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.250 kg |
| Cooling Hose | from engine to engine cooler |
| Placement on Vehicle | Upper |
| Function | Radiator Hose |
| Hose Length | 210 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Outer diameter | 14 mm |
| Inner diameter | 7 mm |
| Cooling Hose | from engine cooler to expansion tank |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Weight | 0.175 kg |
| Hose Length | 550 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Control Type | Button Actuation |
| Weight | 0.5 kg |
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black, Red |
| Number of Connectors / Ports | 7 |
| Function | Hazard Warning Light Switch |
| Extra Description | febi Plus |
| Additional Information | with relay |
| Type | Hazard Warning Light Switch |
| Placement on Vehicle | Dashboard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 193017 |
| Number of Connectors / Ports | 2 |
| Weight | 0.046 kg |
| Cable Length | 540 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Piston Diameter | 25.4 mm |
| Weight | 0.590 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.106 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 105 mm |
| Outer diameter | 70 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Inner diameter | 104 mm |
| Weight | 0.34 kg |
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 170 mm |
| Outer diameter | 156 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.095 kg |
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane), Plastic |
| Thickness | 230 mm |
| Function | Dust Cover Kit, shock absorber |
| for OE number | 33 53 6 767 334 |
| Type | Dust Cover Kit, shock absorber |
£16.04
Important compatibility info
| Weight | 0.065 kg |
| Material | Silicone |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.341 kg |
| Height | 110 mm. 157 mm |
| Outer diameter | 80 mm |
| Number of Connectors / Ports | 2 |
| Function | Fuel filter |
| Filter type | In-Line Filter, with water separator |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.418 kg |
| Length | 75 mm |
| Outer diameter | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Bolt Head/Nut Design | Male Hex |
| Weight | 0.64 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Cone Size | 18 mm |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 193016 |
| Number of Connectors / Ports | 2 |
| Weight | 0.046 kg |
| Cable Length | 540 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.086 kg |
| Placement on Vehicle | Right |
| Material | Plastic |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.2 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 128 mm |
| Material | Thermoplast |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 85 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.624 kg |
| Placement on Vehicle | Left Rear |
| Length | 1670 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Paired article numbers | 18116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.31 kg |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 240 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 41197 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Inner diameter | 45 mm |
| Function | Gasket Set, intake manifold |
| Weight | 0.007 kg |
| Type | Gasket Set, intake manifold |
| Material | FKM (fluorocarbon rubber) |
| Width | 1.7 mm |
| Height | 5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Paired article numbers | 22021 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.330 kg |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Cable Length | 740 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.070 kg |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.13 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.416 kg |
| Type | Bellow Kit, drive shaft |
| Length | 93 mm |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100215)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45644)
- 3x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Paired article numbers | 06641 |
| Placement on Vehicle | Front Axle Left |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Weight | 0.580 kg |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Thermostat, coolant |
| Outer diameter | 32 mm |
| Weight | 0.06 kg |
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 04L 121 113 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.061 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 919 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.35 kg |
| Placement on Vehicle | both sides |
| Length | 508 mm |
| Housing Diameter | 18 mm |
| Eject Force | 620 N |
| Stroke | 180 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 297.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 71 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.210 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (27098)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (27101)
- 1x Febi Circlip (24036)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Paired article numbers | 22020 |
| Weight | 0.330 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 22514 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Additional Information | with lock nut |
| Weight | 0.460 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.292 kg |
| Length | 125 mm |
| Material | Thermoplast |
| Inner diameter 2 | 90 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Type | Coolant Control Valve |
| Weight | 0.101 kg |
| Function | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Replaces | 08136 |
| Weight | 0.712 kg |
| Placement on Vehicle | Upper Front Axle, Lower Front Axle |
| External Thread Size | M18 x 1,5 |
| Function | Ball Joint |
| Cone Size | 19.6 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.570 kg |
| Paired article numbers | 06625 |
| Placement on Vehicle | Front Axle Right |
| Thread Type | with right-hand thread |
| Internal Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 187 mm |
| Paired article numbers | 48067 |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Weight | 0.532 kg |
| External Thread Size | M18 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 1.370 kg |
| Placement on Vehicle | Front Axle |
| Length | 124.1 mm |
| Width | 57.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023