Important compatibility info
Function | Brake Hose |
External Thread Size | M10 x 1 |
Length | 206 mm |
Paired article numbers | 186352 |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Width | 10 mm |
Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
Outer diameter | 60 mm |
Inner diameter | 44 mm |
Function | Shaft Seal, crankshaft |
Additional Information 2 | with mounting sleeve |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 300 mm |
Placement on Vehicle | both sides |
Width | 300 mm |
Type | Mudflap |
Function | Mudflap |
Replaces | 03086 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaced by | 48369 |
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
Pipe Diameter | 35 mm |
Quality/ Grade | 10.9 |
Cone Size | 26 mm |
Thread Length | 80 mm |
Colour | Grey |
Paired article numbers | 02546 |
Spanner Size | 30 |
Outer diameter | 60 mm. 23.5 mm |
Material | Steel |
Length | 115 mm |
Placement on Vehicle | Front Axle |
Thread Type | with right-hand thread |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Type | Angled Ball Joint, steering push rod / Tie Rod End |
Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane), Rubber |
Placement on Vehicle | Front Axle |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12477)
- 2x Febi Protective Cap/Bellow, shock absorber (17148)
Important compatibility info
Spanner Size | 27 |
Control Type | Push Actuation |
Length | 35 mm. 44 mm |
Material | Brass |
External Thread Size | M18 x 1,5, M27 x 1 |
Type | Control Switch / Switch, 'driver cab tilted' display |
Function | Control Switch / Switch, 'driver cab tilted' display |
Replaces | 09963 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 80 mm |
Function | Cap, fuel tank |
Additional Information | with chain |
Type | Cap, fuel tank |
Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 323.5 mm |
Function | Inner Tie Rod |
External Thread Size | M18 x 1,5, M15 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage to | 24 V |
Voltage from | 12 V |
Height | 45 mm |
Fulfils ECE norm | R10, R3, R91 |
Light Design | LED |
Cable Length | 500 mm |
Type | Side Marker Light |
Protection Type (IP Code) | IP67 |
Width | 102 mm |
Inspection Tag | EMC |
Colour | Orange |
Depth | 14 mm |
Port / Connector type | PRS |
Mounting bores distance | 84 mm |
Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 91 mm |
Gasket outer diameter | 99.2 mm |
Type | Oil Filter |
Function | Oil Filter |
Height | 93 mm |
Outer diameter | 83 mm |
Additional Information 2 | with seal ring |
Inner diameter | 27 mm |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 184154 |
External Thread Size | M12 x 1,5 |
Type | Tie Rod End |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Length | 94 mm |
Spanner Size | 23 |
Additional Information | with nuts |
Internal Thread Size | M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 94 mm |
Spanner Size | 23 |
Paired article numbers | 184153 |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 19 |
Outer diameter | 56 mm |
for OE number | 13 02 112 10R |
Type | Sprocket, crankshaft |
Function | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 115 mm |
Material | Steel |
Outer diameter | 23.5 mm. 60 mm |
Thickness | 107 mm |
Spanner Size | 30 |
Paired article numbers | 02545 |
Colour | Grey |
Thread Length | 91 mm |
Thread Type | with left-hand thread |
Cone Size | 26 mm |
Quality/ Grade | 10.9 |
Pipe Diameter | 35 mm |
External Thread Size | M20 x 1,5, M30 x 1,5 LHT |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Replaces | 08793 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with counter nut |
Length | 344 mm |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M12 x 1,25 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 17 mm |
Outer diameter | 59 mm. 45 mm |
Inner diameter | 32 mm. 19 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (04941)
- 1x Febi Screw (04946)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Tab Washer, axle nut (08952)
Important compatibility info
Material | Rubber |
Function | Rubber Buffer, suspension |
Outer diameter | 157 mm |
Height | 125 mm |
Length | 157 mm |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 81 mm |
Filter type | Main Stream Filtration, Filter Insert |
Height | 82 mm |
Additional Information 2 | with seal ring |
Outer diameter | 83 mm |
Inner diameter | 21 mm |
Function | Fuel filter |
Gasket outer diameter | 88.2 mm |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Function | Brake Pad Set, disc brake |
Manufacturer | FIAT FORD |
Type | Brake Pad Set, disc brake |
Length | 115 mm |
Width | 55.4 mm |
Model | 500 CINQUECENTO KA PANDA PUNTO SEICENTO |
Replaces | 16754 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from radiator to water pipe |
Function | Radiator Hose |
Additional Information | with quick coupling |
Type | Radiator Hose |
for OE number | 8D0 121 101 K |
Placement on Vehicle | Upper Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Length | 50 mm |
Material | Brass |
Spanner Size | 19 |
Colour | Black |
Number of Connectors / Ports | 2 |
Type | Sensor, intake air temperature |
Function | Sensor, intake air temperature |
Screw length below head | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 109 mm |
Inner diameter | 81 mm |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Rear Axle |
Length | 67 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bushing, leaf spring |
Inner diameter | 26 mm |
Thickness | 101.5 mm. 112 mm |
Placement on Vehicle | Rear Axle |
Outer diameter | 55 mm |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 125 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 31 mm |
Inner diameter 2 | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100421)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45647)
- 2x Febi High Temperature Lubricant (03630)
Important compatibility info
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Length | 1425 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 2 |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Function | Ball Joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Material | PU (Polyurethane) |
Width | 64 mm |
Placement on Vehicle | Front Axle |
Length | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 142.5 mm |
Valve stem diameter | 8 mm |
Valve head diameter | 38 mm |
Notches / Holes Number | 1 |
Type | Exhaust Valve |
Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, headlight cleaning |
Type | Washer Fluid Pump, headlight cleaning |
Replaces | 103611; 26235 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 40540 |
Function | Ball Joint |
Additional Information | with nuts |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40276)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 40539 |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40277)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
Mounting bores distance | 116 mm |
Width | 130 mm |
Height | 32 mm |
Voltage to | 24 V |
Type | End Outline Marker Light |
Voltage from | 12 V |
Depth | 14 mm |
Cable Length | 500 mm |
Colour | White |
Inspection Tag | EMC |
Protection Type (IP Code) | IP67 |
Function | End Outline Marker Light |
Light Design | LED |
Fulfils ECE norm | R10, R7, R3 |
Port / Connector type | PRS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 29675 |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 22 mm |
Number of Teeth | 124 |
Belts | with trapezoidal tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 943 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1712 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Function | Fuel filter |
Type | Fuel filter |
Height | 164 mm |
Outer diameter | 92 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 72 mm |
Width of castor bearing surface | 38.5 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with pre-filter |
Length | 394 mm |
Height | 48 mm |
Width | 283 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 300 mm |
Width | 350 mm |
Function | Mudflap |
Type | Mudflap |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 39 mm |
Material | Rubber/Metal |
Outer diameter | 54 mm |
Inner diameter | 16 mm |
Type | Bushing, leaf spring |
Function | Bushing, leaf spring |
Shore-A hardness value, base body | 74 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 100 mm |
Outer diameter | 8 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Thickness | 80 mm |
Inner diameter | 131 mm |
Function | Mounting, leaf spring |
Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Function | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 301 mm |
External Thread Size | M12 x 1,25, M17 x 1 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Ball Joint |
External Thread Size | M12 x 1,75 |
Cone Size | 17 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided |
Outer diameter | 98 mm |
Inner diameter | 72 mm |
Rotation Direction | Anticlockwise rotation |
Function | Shaft Seal, crankshaft |
Width | 98 mm |
Height | 8 mm |
Material | FPM (fluoride rubber) |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Coolant Flange |
Function | Coolant Flange |
Additional Information | with gasket/seal |
for OE number | 11 11 7 800 048 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 265 mm |
Height | 38 mm |
Width | 216 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Cone Size | 19.6 mm |
Mounting points diameter | 10.5 mm |
Function | Ball Joint |
External Thread Size | M18 x 1,5 |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information 2 | with bolts/screws |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023