Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| Paired article numbers | 38865 |
| Length | 112 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Spanner Size | 17 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 74 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Additional Information | with gasket/seal |
| Outer diameter | 58 mm |
| Opening Temperature | 81 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Height | 135 mm |
| Width | 108 mm |
| Rated Power | 15 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 40 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 1100 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Extra Description | ProKit |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Length | 180 mm |
| Outer diameter | 6 mm. 15 mm |
| Colour | Black |
| Stroke | 49.5 mm |
| Function | Linkage Damper, injection system |
| Type | Linkage Damper, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (45444)
- 2x Febi Nut (23103)
£16.43
Important compatibility info
| Number of Connectors / Ports | 7 |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Placement on Vehicle | Lower |
| Outer diameter | 91 mm |
| Thickness | 36 mm |
| Inner diameter | 15 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Length | 47 mm |
| Spanner Size | 22 |
| Opening Pressure | 1.85 bar |
| Function | Breather Screw/Valve, radiator |
| External Thread Size | M21 x 1,5 |
| Type | Breather Screw/Valve, radiator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Material | Plastic |
| Width | 30 mm |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Spanner Size | 22 |
| External Thread Size | M14 x 1,5 |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Length | 75 mm |
| Height | 53 mm |
| Width | 75 mm |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 64 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.45
Important compatibility info
| Additional Information | with counter nut |
| Length | 223 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right |
| Length | 135 mm |
| Spanner Size | 22 |
| Paired article numbers | 180972 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Length | 135 mm |
| Spanner Size | 22 |
| Paired article numbers | 180969 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 50 mm |
| Inner diameter | 14.5 mm |
| Thickness | 30 mm |
| Placement on Vehicle | Rear Axle |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.47
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.3 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Placement on Vehicle | Rear Axle |
| Length | 105.1 mm |
| Width | 46.7 mm |
| Type | Brake Pad Set, disc brake |
| Replaces | 16271 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.47
Important compatibility info
| Thickness/Strength 1 | 16.9 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Width | 54.2 mm |
| Length | 137.2 mm |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023