Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| Paired article numbers | 38865 |
| Length | 112 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left |
| Length | 313 mm |
| Material | Steel |
| Inner diameter | 8 mm |
| Paired article numbers | 29697 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Number of Connectors / Ports | 7 |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Gasket inner diameter | 81 mm |
| Filter type | Main Stream Filtration, Filter Insert |
| Height | 82 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 83 mm |
| Inner diameter | 21 mm |
| Function | Fuel filter |
| Gasket outer diameter | 88.2 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Placement on Vehicle | Lower |
| Outer diameter | 91 mm |
| Thickness | 36 mm |
| Inner diameter | 15 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Inner diameter | 16 mm |
| Cooling Hose | from radiator to water pipe |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Material | Plastic |
| Width | 30 mm |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 88 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08025)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi High Temperature Lubricant (03630)
£16.44
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Length | 1700 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Length | 75 mm |
| Height | 53 mm |
| Width | 75 mm |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 64 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.45
Important compatibility info
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 36.8 mm |
| Material | Plastic |
| Outer diameter | 140 mm |
| Inner diameter 1 | 74 mm |
| Inner diameter 2 | 81 mm |
| Outer diameter 1 | 127 mm |
| Outer diameter 2 | 88 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 124 mm |
| Material | Steel |
| Spanner Size | 17 |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 36 mm |
| Outer diameter | 82 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (03810)
- 1x Febi Circlip (14537)
£16.46
Important compatibility info
| Length | 1712 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Height | 145 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Outer diameter | 84 mm |
| Additional Information | with fastening/mounting material |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| for OE number | 31303937 |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 2.5 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023