Important compatibility info
Weight | 0.245 kg |
Length | 2403 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Material | PP (Polypropylene) |
Fill quantity | 9.5 l |
Weight | 2.125 kg |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.810 kg |
Type | Air Filter |
Function | Air Filter |
Filter type | Filter Insert |
Inner diameter | 180 mm |
Outer diameter | 310 mm |
Height | 524 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.198 kg |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 122 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 71 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173040)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.275 kg |
Placement on Vehicle | Rear |
Length | 1718 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Weight | 0.866 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Vehicle Equipment | for vehicles with electric parking brake |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Material | Cast Iron |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Weight | 3.4 kg |
Paired article numbers | 186528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Weight | 0.065 kg |
Length | 255 mm |
Filter type | Pollen Filter |
Width | 182 mm |
Height | 35 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Steel |
Weight | 2.52 kg |
Cone Size | 18 mm |
Additional Information | with rubber mounts, with lock nut |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.362 kg |
Outer diameter | 600 mm |
Thickness | 67 mm |
Inner diameter | 82.5 mm |
Bolt Hole Circle Diameter | 97 mm |
Number of Wings | 9 |
Function | Fan Wheel, engine cooling |
Type | Fan Wheel, engine cooling |
for OE number | 366 200 46 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.008 kg |
Width of castor bearing surface | 33.5 mm |
Track rollers material | Metal |
Housing material | Aluminium |
Operating Mode | Automatic |
Outer diameter | 70 mm |
Function | Belt Tensioner, v-ribbed belt |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.6 kg |
Placement on Vehicle | Rear Axle |
Length | 238 mm |
Outer diameter | 141 mm |
Function | Suspension Spring |
Wire Diameter | 12 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 11 mm |
Outer diameter | 23 mm |
Length | 22 mm |
External Thread Size | M14 x 1,5 |
Thread Length | 11 mm |
Spanner Size | 17 |
Bolt Head/Nut Design | Male Hex |
Weight | 0.05 kg |
Function | Screw Plug, oil sump |
Type | Screw Plug, oil sump |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, oil sump (30180)
- 1x Febi Seal Ring, oil drain plug (30181)
Important compatibility info
Weight | 1.96 kg |
Length | 140 mm |
Width | 68 mm |
Thickness | 120 mm |
Thread Type | with right-hand thread |
Cone Size | 30 mm |
Function | Angled Ball Joint, steering drag link |
External Thread Size | M24 x 1,5, M32 x 1,5 RHT |
Extra Description | ProKit |
Type | Angled Ball Joint, steering drag link |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tilt Pump, driver cab |
Weight | 2.5 kg |
Internal Thread Size | M10 x 1,5 |
External Thread Size | M12 x 1,5 |
Operating Mode | Manual |
Number of Connectors / Ports | 2 |
Hole Spacing | 75 mm |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 27 |
Number of Connectors / Ports | 4 |
Function | Sensor, speed |
Weight | 0.105 kg |
Length | 85 mm |
External Thread Size | M18 x 1,5 |
Type | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40376 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.985 kg |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (11821)
- 1x Febi Clamping Bolt, ball joint (03938)
- 2x Febi Washer (08375)
- 1x Febi Nut (04512)
Important compatibility info
Weight | 0.081 kg |
Material | Plastic |
Opening Pressure | 1.5 bar |
Function | Cap, coolant tank |
Type | Cap, coolant tank |
for OE number | 8E0 121 321 |
Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Weight | 0.030 kg |
Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Inner diameter | 16 mm |
Thickness | 39 mm |
Outer diameter | 48 mm |
Material | Rubber |
Width | 41 mm |
Length | 48 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 41081 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 10.0 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut, with sleeves |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Number of Ribs | 6 |
Weight | 0.12 kg |
Type | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1063 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 15 |
Weight | 0.366 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Diameter | 1 mm |
Length | 270 mm |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Thread Length | 22 mm |
Rod/Strut | Coupling Rod |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Additional Information 2 | with seal ring |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Weight | 0.016 kg |
Outer diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Weight | 2.230 kg |
Function | Mounting, automatic transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with nut, with washers |
Replaces | 41638 |
Extra Description | ProKit |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.359 kg |
Chain Type | Silent Chain, Closed chain |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Number of Chain Links | 98. 88 |
Timing Chain Size | Z53AI-3 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Timing Chain (181634)
- 1x Febi Chain, intermediate shaft (181635)
- 2x Febi Tensioner, timing chain (181620)
- 1x Febi Tensioner, timing chain (181608)
- 1x Febi Guide, timing chain (181617)
- 1x Febi Guide, timing chain (181619)
- 1x Febi Guide, timing chain (182220)
- 1x Febi Guide, timing chain (181622)
- 1x Febi Guide, timing chain (181618)
- 1x Febi Guide, timing chain (181623)
- 1x Febi Guide, timing chain (181624)
- 2x Febi Guide, timing chain (181621)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Thickness | 74 mm |
Inner diameter | 14 mm |
Outer diameter 1 | 43 mm |
Outer diameter 2 | 28 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.22 kg |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Weight | 5.05 kg |
Steering arm type | Control Arm |
Paired article numbers | 43070 |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 79 mm |
Weight | 0.71 kg |
Thickness | 51 mm |
Inner diameter | 19 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Material | Aluminium |
Width | 71 mm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38659)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023