Important compatibility info
Material | Plastic |
Placement on Vehicle | Lower |
Function | Hose, crankcase ventilation |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Length | 76 mm |
Width | 102 mm |
Outer diameter | 52 mm |
Thickness | 45 mm |
Inner diameter | 18 mm |
Paired article numbers | 22271 |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 233 mm |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M22 x 1,5 |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
External Thread Size | M12 x 1,75 |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5 |
External Thread Size | M10 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 108 mm |
Paired article numbers | 34901 |
Function | Tie Rod End |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 44 mm. 25 mm |
Thickness | 46 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 19.8 mm |
Number of Teeth | 97 |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head |
Thickness | 1.9 mm |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15.3 mm |
Wear Warning Contact | excl. wear warning contact |
Width | 56.5 mm |
Length | 61.7 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 82 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 32 41 1 095 526 |
Function | Hydraulic Hose, steering |
Type | Hydraulic Hose, steering |
Inner diameter | 16 mm |
Additional Information 2 | with outer fabric belt |
Placement on Vehicle | from fluid reservoir to hydraulic pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 279 mm |
Housing Diameter | 18 mm |
Eject Force | 510 N |
Stroke | 72 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 171.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 125 mm |
Material | Thermoplast |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 92 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29199)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45644)
- 1x Febi Circlip (29202)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | both sides |
Length | 490 mm |
Housing Diameter | 19 mm |
Eject Force | 530 N |
Stroke | 189 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 273 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 197.5 mm |
Piston conrod diameter | 6 mm |
Stroke | 136 mm |
Housing Diameter | 15 mm |
Length | 356 mm |
Placement on Vehicle | both sides |
Function | Gas Spring, boot/cargo area |
Eject Force | 290 N |
Mounting points diameter | 16.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 110 mm |
Material | Thermoplast |
Inner diameter 1 | 27 mm |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 76 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (36520)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Function | Radiator Hose |
Type | Radiator Hose |
Inner diameter | 56 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 61 mm |
Hose Length | 310 mm |
Wall Thickness | 5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 39024 |
Function | Ball Joint |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Length | 228 mm |
Inner diameter | 10 mm |
Paired article numbers | 39536 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Length | 228 mm |
Inner diameter | 10 mm |
Paired article numbers | 39535 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023