Important compatibility info
| Inner diameter 2 | 48 mm |
| Inner diameter 1 | 13 mm |
| Material | Thermoplast |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 176 mm |
| Additional Information 2 | with clamps |
Important compatibility info
| Thread Size | M20X1,5 |
| Internal Teeth, wheel side | 19 |
| Technical Information Number | Middle groove |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 147 mm |
| Function | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 48 mm |
| External Teeth, Wheel Side | 23 |
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Intake Hose, air filter |
| Outer diameter 2 | 80 mm |
| Outer diameter 1 | 83 mm |
| Colour | Black |
| Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
| Width | 44 mm |
| Inner diameter | 12 mm |
| Length | 107 mm |
| Height | 50 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Inner diameter | 19.05 mm |
| Material | Plastic |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Important compatibility info
| Thread Size | M10x1 |
| Function | Brake Hose |
| Length 2 | 273 mm |
| Length 1 | 325 mm |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Type | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Thread Size | M10x1 |
| Function | Brake Hose |
| Length 2 | 273 mm |
| Length 1 | 327 mm |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with banjo fitting |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Thread Size | M10x1 |
| Function | Brake Hose |
| Length 2 | 285 mm |
| Length 1 | 318 mm |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with banjo fitting |
Important compatibility info
| Length 1 | 1943 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Important compatibility info
| Paired article numbers | FTR6241 |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 186 mm |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Thread Size | M12x1.25 |
| Thread Measurement 2 | M16x1.5 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









