Important compatibility info
Length | 82 mm |
Material | Rubber |
Inner diameter 1 | 30 mm |
Inner diameter 2 | 80 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | E 14 |
External Thread Size | M10 x 1,5 |
Surface | Phosphatized |
Thread Length | 92 mm |
Bolt Head/Nut Design | Male Torx |
Material | Steel |
Length | 134 mm |
Screw length below head | 122 mm |
Function | Cylinder Head Bolt |
Type | Cylinder Head Bolt |
Number of screws | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Internal Thread Size | 3/4" - 16 UNF |
Type | Oil Filter |
Height | 120 mm |
Outer diameter | 77 mm |
Filter type | Spin-on Filter |
Seal Diameter | 71.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Type | Oil Filter |
Height | 89 mm |
Outer diameter | 62 mm |
Filter type | Filter Insert |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Blue |
Function | Shaft Seal, wheel bearing |
Outer diameter | 136.7 mm |
Material | NBR (nitrile butadiene rubber) |
Placement on Vehicle | Front Axle, Rear Axle |
Thickness | 8 mm |
Inner diameter | 115 mm |
Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 230 mm |
Width | 105 mm |
Filter type | Pollen Filter |
Height | 20 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 46 mm |
Inner diameter | 25.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 46 mm |
Width | 49 mm |
Material | Rubber |
Thickness | 44 mm |
Inner diameter | 18.4 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 18 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 31 mm |
Bolt Head/Nut Design | External Hexagon |
Outer diameter | 30.3 mm |
Material | Steel |
Function | Wheel Bolt |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 8.8 |
Thread Length | 26 mm |
Surface | Zink flake coated |
Spanner Size | 19 |
Length | 61 mm |
Placement on Vehicle | Front Axle, Rear Axle |
External Thread Size | M14 x 1,5 |
Rims | for light alloy rims, for steel rims |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Screw length below head | 26 mm |
Bolt Head/Nut Design | External Hexagon |
Outer diameter | 23 mm |
Material | Steel |
Function | Wheel Bolt |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 10.9 |
Thread Length | 20 mm |
Spanner Size | 17 |
Length | 57 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Rims | for light alloy rims, for steel rims |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 10.9 |
Function | Screw |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Length | 33 mm |
Screw length below head | 39 mm |
External Thread Size | M12 x 1,5 |
Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Function | Radiator Hose |
Wall Thickness | 4 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Hose Length | 66 mm |
Type | Radiator Hose |
Inner diameter | 9 mm |
Additional Information 2 | with clamps |
Outer diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101076)
- 2x Febi Clamping Clip (48277)
Important compatibility info
Placement on Vehicle | Rear Axle, inner |
Length | 53.5 mm |
Width | 48 mm |
Material | Rubber |
Outer diameter | 48 mm |
Thickness | 41.7 mm |
Inner diameter | 23 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | MVQ (silicone rubber) |
Function | Gasket, oil cooler |
Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 30 mm |
Function | Radiator Hose |
Outer diameter 1 | 25 mm |
Inner diameter 1 | 17 mm |
Type | Radiator Hose |
Cooling Hose | from oil cooler to engine block |
Inner diameter | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 85 mm |
Thickness | 3 mm |
Inner diameter | 79 mm |
Type | Seal Ring, coolant pipe |
Function | Seal Ring, coolant pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 50 mm |
Width | 49 mm |
Material | Rubber |
Outer diameter | 48.5 mm |
Thickness | 47 mm |
Inner diameter | 19 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 260 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tightening Strap, wing |
Function | Tightening Strap, wing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 593 mm |
Type | Cable Pull, door release |
Function | Cable Pull, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Placement on Vehicle | Left |
Material | Plastic |
Paired article numbers | 28416 |
Type | Frame, exterior door handle |
Function | Frame, exterior door handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Colour | Black |
Material | Plastic |
Paired article numbers | 28415 |
Function | Frame, exterior door handle |
Type | Frame, exterior door handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Pressure | 1.2 bar |
Material | Metal |
Type | Cap, coolant tank |
Function | Cap, coolant tank |
for OE number | 123 501 02 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Valve Guide |
Valve type | for exhaust valves |
Type | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose, crankcase ventilation |
for OE number | 119 094 26 82 |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Inner diameter | 10 mm |
Bearing/Mounting Type | Rubber Mount |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PA (polyamide) |
Length | 41 mm |
Width | 18 mm |
Thickness | 36.3 mm |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 25 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Bolt Head/Nut Design | External Hexagon |
Length | 16 mm |
Material | Steel |
Spanner Size | 17 |
Surface | Zink flake coated |
Thread Length | 10.5 mm |
Quality/ Grade | 6.8 |
Type | Screw Plug, oil sump |
Function | Screw Plug, oil sump |
Screw length below head | 11 mm |
Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bulb / Bulb, direction indicator / Bulb, rear fog light / Bulb, rear fog/tail light / Bulb, reverse light / Bulb, stop light / Bulb, stop/tail light / Bulb, tail light |
Fulfils ECE norm | R37 |
Type | Bulb / Bulb, direction indicator / Bulb, rear fog light / Bulb, rear fog/tail light / Bulb, reverse light / Bulb, stop light / Bulb, stop/tail light / Bulb, tail light |
Bulb Type | P21W, Ball-shaped lamp, longer service life (vibration-proof) |
Rated Power | 21 W |
Voltage | 24 V |
Base design light bulb | BA15s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 25 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Length | 215 mm |
Width | 162 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Thickness | 79 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shaft Seal, wheel bearing |
Inner diameter | 71 mm |
Outer diameter | 90 mm |
Material | NBR (nitrile butadiene rubber) |
Height | 8 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 60 mm |
Placement on Vehicle | Front Axle |
Length | 31 mm |
Material | PU (Polyurethane) |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Radiator Hose |
Cooling Hose | from heat exchanger to water pump |
Inner diameter 2 | 16 mm |
Inner diameter 1 | 23 mm |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sealing Cap, oil filler neck |
Material | Plastic |
Additional Information | with gasket/seal |
Type | Sealing Cap, oil filler neck |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 239 mm |
Brake Type | Disc Brake |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 11812 |
Placement on Vehicle | frontal sided |
Material | FPM (fluoride rubber) |
Outer diameter | 50 mm |
Thickness | 7 mm |
Inner diameter | 35 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 753 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 3 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 49 mm |
Thickness | 10 mm |
Inner diameter | 28 mm |
Function | Seal Ring, spark plug shaft |
Type | Seal Ring, spark plug shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 64 mm |
Inner diameter | 14 mm |
Function | Spring Seat |
Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 40 mm |
Thickness | 81 mm |
Thread Length | 46 mm |
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 10.9 |
Function | Axle Bolt, drive shaft |
Screw length below head | 60 mm |
Type | Axle Bolt, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Function | Repair Kit, brake caliper |
Type | Repair Kit, brake caliper |
for OE number | 81.50802.6024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without valve cover gasket |
Material | Rubber |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Seal Ring, cylinder head cover bolt (15190)
- 3x Febi Seal Ring, cylinder head cover bolt (15188)
Important compatibility info
External Thread Size | M12 x 1,25 |
Rims | for light alloy rims |
Screw length below head | 37 mm |
Material | Steel |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Length | 58 mm |
Spanner Size | 17 |
Surface | Zink flake coated |
Thread Length | 17 mm |
Bolt Head/Nut Design | External Hexagon |
Quality/ Grade | 10.9 |
Function | Wheel Bolt |
Type | Wheel Bolt |
Outer diameter | 28.3 mm |
Wheel Fastening | Conical Seat F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 51 mm |
Placement on Vehicle | Front Axle |
Function | Mounting, stabiliser bar |
Inner diameter | 22 mm |
Thickness | 40 mm |
Outer diameter | 40 mm |
Material | Rubber |
Width | 40 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40 mm |
Thickness | 6 mm |
Inner diameter | 32 mm |
Function | Gasket, timing case |
Type | Gasket, timing case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shifting Points | 0.9 bar |
Spanner Size | 21 |
Function | Oil Pressure Switch |
Number of Connectors / Ports | 1 |
External Thread Size | M14 x 1,5 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 27 mm |
Height | 4 mm |
Width | 19 mm |
Material | ACM (Polyacrylate) |
Type | Gasket, oil pump |
Function | Gasket, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023