Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Fuel filter |
| Pipe Diameter | 10 mm |
| Weight | 0.427 kg |
| Length | 221 mm |
| Outer diameter | 95 mm |
| Filter type | In-Line Filter, with water separator |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| Weight | 0.050 kg |
| Length | 116.3 mm |
| Valve stem diameter | 5 mm |
| Valve head diameter | 27.5 mm |
| Notches / Holes Number | 3 |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| Height | 102 mm |
| Outer diameter | 81 mm |
| Additional Information 2 | with seal ring |
| Filter type | Filter Insert |
| Spanner Size | 30 |
| Transmission Type | 8-Speed Dual-Clutch Transmission |
| Weight | 0.107 kg |
| Bolt Head/Nut Design | Male Hex |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| External Thread Size | M24 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 95 mm |
| Thread Type | with right-hand thread |
| Cone Size | 20 mm |
| Function | Tie Rod End |
| Weight | 0.708 kg |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (12975)
- 1x Febi Nut (01033)
£17.59
Important compatibility info
| Height | 55 mm |
| Width | 130 mm |
| Function | Hydraulic Filter, automatic transmission |
| Length | 185 mm |
| Weight | 0.192 kg |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Weight | 0.310 kg |
| Inner diameter | 22 mm |
| Function | Mounting Kit, stabiliser bar |
| Additional Information | with holder |
| Type | Mounting Kit, stabiliser bar |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bracket, stabiliser mounting (36504)
- 2x Febi Mounting, stabiliser bar (18604)
- 2x Febi Screw (06862)
- 2x Febi Nut, ball joint (28510)
£17.59
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.282 kg |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (177268)
£17.59
Important compatibility info
| Weight | 0.200 kg |
| Material | Plastic |
| Outer diameter | 65 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| External Thread Size | M8 x 1,25 |
| Width of castor bearing surface | 22.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| Function | Toothed Belt, power take-off |
| Width | 10 mm |
| Number of Teeth | 46 |
| Belts | with trapezoidal tooth profile |
| Weight | 0.022 kg |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Type | Toothed Belt, power take-off |
| Units / Pulleys | Oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 0.485 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.59
Important compatibility info
| Function | Inner Tie Rod |
| Weight | 0.598 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 221 mm |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Weight | 0.044 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 109692 |
| Number of Connectors / Ports | 2 |
| Resistance | 1130 Ohm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Weight | 0.499 kg |
| Type | Inner Tie Rod |
| Length | 244 mm |
| for OE number | 45503-B1020 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Material | Steel |
| Outer diameter | 121 mm |
| Length | 332 mm |
| Inner diameter | 115 mm |
| Function | Corrugated Pipe, exhaust system |
| Weight | 1.003 kg |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Weight | 0.245 kg |
| Length | 2403 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Weight | 0.178 kg |
| Placement on Vehicle | both sides |
| Length | 282 mm |
| Housing Diameter | 19 mm |
| Eject Force | 610 N |
| Stroke | 78 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 159.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Weight | 0.044 kg |
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 109719 |
| Resistance | 1130 Ohm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.60
Important compatibility info
| Weight | 0.35 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 60 mm |
| Thickness | 34 mm |
| Inner diameter | 18 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.61
Important compatibility info
| for OE number | 54626-26000 S2 |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.204 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (170470)
- 2x Febi Protective Cap/Bellow, shock absorber (185758)
£17.61
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Weight | 0.34 kg |
| Pipe Diameter | 8 mm |
| Filter type | In-Line Filter |
| Outer diameter | 91 mm |
| Height | 122 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.61
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 485 mm. 277 mm |
| Eject Force | 250 N |
| Stroke | 200 mm |
| Weight | 0.237 kg |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.61
Important compatibility info
| Weight | 0.470 kg |
| Placement on Vehicle | Front Axle |
| Length | 62 mm |
| Width | 70 mm |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Thickness | 54 mm |
| Inner diameter | 18 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.61
Important compatibility info
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Length | 1492 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.235 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.61
Important compatibility info
| Weight | 0.238 kg |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.62
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Weight | 0.670 kg |
| Placement on Vehicle | Rear Axle |
| Length | 85.3 mm |
| Width | 46.5 mm |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 14 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.62
Important compatibility info
| Voltage | 24 V |
| Valve type | Shut-Off Valve |
| Function | Valve, injection system |
| Weight | 0.079 kg |
| Type | Valve, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.62
Important compatibility info
| Length | 120 mm |
| Weight | 0.133 kg |
| Paired article numbers | 193741 |
| Type | Brake Hose |
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.62
Important compatibility info
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
| Weight | 0.68 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Toothed Disc, external planetary gearbox (08005)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Sealing ring, wheel hub (planetary gearbox) (08006)
- 1x Febi Shaft Seal, wheel hub (08007)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (05356)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
£17.63
Important compatibility info
| Weight | 0.388 kg |
| Placement on Vehicle | Front Axle |
| Length | 239 mm |
| Width | 86 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (172142)
- 2x Febi Rubber Buffer, suspension (103640)
£17.63
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.016 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.63
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023