Proud to be a UK-based company
Contact us
Important compatibility info
| Filter type | Filter Insert |
| Function | Fuel filter |
| Height | 118 mm |
| Outer diameter | 111 mm |
| Additional Information | with gaskets/seals |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34310 |
| Surface | Phosphatized |
| Internal Thread Size | M15 x 1,5 |
| Extra Description | ProKit |
| Replaces | 43219 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Placement on Vehicle | Rear Axle Lower, inner |
| Length | 95 mm |
| Inner diameter | 55 mm |
| Material | Rubber/Metal |
| Outer diameter | 80 mm. 92 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Outer diameter 1 | 19 mm |
| Outer diameter 2 | 42 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle, outer |
| Inner diameter | 16 mm |
| Length | 130 mm |
| Hole Spacing | 100 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Right |
| Material | Thermoplast |
| Inner diameter 1 | 37 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 116 mm |
| Inner diameter 2 | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172863)
- 1x Febi Molybdenum Grease (02582)
£17.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 625 mm |
| Paired article numbers | 183699 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Tensile Cord Material | Aramid |
| Length | 918 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Material | Metal, Plastic |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 76 mm |
| Width | 69 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.44
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Length | 312 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 36506 |
| Internal Thread Size | M16 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Length | 208 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36119)
- 1x Febi Nut (36120)
£17.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 36507 |
| External Thread Size | M12 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Length | 208 mm |
| Spanner Size | 24 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36118)
- 1x Febi Nut (36120)
£17.45
Important compatibility info
| Bolt Head/Nut Design | Male Torx |
| Function | Cylinder Head Bolt Set |
| Type | Cylinder Head Bolt Set |
| for OE number | 51.90490.0024 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Bolt (11726)
- 3x Febi Cylinder Head Bolt (11725)
- 2x Febi Cylinder Head Bolt (11724)
£17.45
Important compatibility info
| Width | 42 mm |
| Outer diameter | 74 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1706 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Depth | 24 mm |
| Protection Type (IP Code) | IP67 |
| Voltage from | 12 V |
| Mounting bores distance | 90 mm |
| Type | End Outline Marker Light |
| Width | 111 mm |
| Height | 50 mm |
| Function | End Outline Marker Light |
| Cable Length | 500 mm |
| Light Design | LED |
| Colour | Red |
| Port / Connector type | PRS |
| Voltage to | 24 V |
| Fulfils ECE norm | R3, R7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Width | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Thickness | 12.5 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Length | 169 mm |
| Outer diameter | 61 mm |
| Additional Information 2 | with pressure regulator |
| Filter type | In-Line Filter |
| Seal Diameter | 23 mm |
| Pressure | 5.2 bar |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023