Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 68.5 mm |
| Outer diameter | 125 mm. 38 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Weight | 1.46 kg |
| External Thread Size | M12 x 1,5 |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing, with wheel studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 28700 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Extra Description | ProKit |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| Weight | 0.649 kg |
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Replaces | 36658 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.07 kg |
| Width | 21 mm |
| Number of Teeth | 81 |
| Function | Timing Belt |
| Type | Timing Belt |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.417 kg |
| Length | 244 mm |
| Height | 31 mm |
| Width | 200 mm |
| Additional Information 2 | with bolts/screws, with seal ring |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (11672)
- 1x Febi Seal Ring, hydraulic filter (11673)
- 3x Febi Screw (11674)
£17.72
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 996 mm |
| Weight | 0.06 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.921 kg |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (07559)
- 1x Febi Threaded Sleeve, suspension strut (02159)
- 1x Febi Rubber Buffer, suspension (08384)
- 1x Febi Protective Cap/Bellow, shock absorber (02557)
£17.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 181 mm |
| Width | 200 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.222 kg |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (28204)
- 2x Febi Protective Cap/Bellow, shock absorber (106422)
£17.72
Important compatibility info
| Weight | 0.207 kg |
| Placement on Vehicle | both sides |
| Length | 349 mm |
| Housing Diameter | 18 mm |
| Eject Force | 320 N |
| Stroke | 101 mm |
| Mounting points diameter | 15 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 221.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.315 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Material | NBR (nitrile butadiene rubber), FPM (fluoride rubber), PA (polyamide) |
| Inner diameter 1 | 12.7 mm |
| Inner diameter 2 | 16 mm |
| Function | Hose, crankcase ventilation |
| Weight | 0.075 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Hose Length | 204 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Height | 56 mm |
| Outer diameter | 80 mm |
| Inner diameter | 10 mm |
| Placement on Vehicle | Right |
| Weight | 0.37 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Inner diameter | 39 mm |
| Outer diameter | 74 mm |
| Width | 39 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Weight | 0.79 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (04015)
- 1x Febi Nut, kingpin (22953)
£17.73
Important compatibility info
| Weight | 0.407 kg |
| Piston Diameter | 19.1 mm |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Length | 279 mm |
| Outer diameter | 81 mm |
| Pipe Diameter | 10 mm. 8 mm |
| Function | Fuel filter |
| Filter type | In-Line Filter, without connection for water sensor, without water drain screw |
| Weight | 0.45 kg |
| Type | Fuel filter |
| Replaces | 103010 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.125 kg |
| Length | 1405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| Weight | 0.840 kg |
| Function | Bushing, leaf spring |
| Material | Rubber/Metal |
| Length | 75 mm |
| Inner diameter | 6.5 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.063 kg |
| Height | 40 mm |
| Width | 80 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 10 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 06J 103 213 B |
| Hose Length | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.8 mm |
| Inspection Tag | ECE R90 Approved |
| Width | 53.1 mm |
| Length | 94.8 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.102 kg |
| Type | Brake Pad Set, disc brake |
| Replaces | 16253 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 88 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08025)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi High Temperature Lubricant (03630)
£17.75
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.128 kg |
| Number of Ribs | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Colour | Green |
| Weight | 0.010 kg |
| Function | Gasket, automatic transmission oil sump |
| Material | Paper |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Tensile Cord Material | Aramid |
| Length | 918 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.097 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Inner diameter 2 | 72 mm |
| Weight | 0.365 kg |
| Placement on Vehicle | transmission sided, Front Axle |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Length | 113 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45641)
- 1x Febi Clamping Clip (38757)
- 1x Febi Bellow, drive shaft (36510)
- 1x Febi Molybdenum Grease (08414)
£17.76
Important compatibility info
| Weight | 0.6 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 18 |
| Function | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 984 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Weight | 0.05 kg |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Additional Information | with grease |
| Additional Information 2 | with bolts/screws, with clamps |
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 63 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.59 kg |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.77 kg |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34310 |
| Surface | Phosphatized |
| Internal Thread Size | M15 x 1,5 |
| Extra Description | ProKit |
| Replaces | 43219 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Spanner Size | 23 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 167 mm |
| Weight | 0.55 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1196 mm |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Weight | 0.126 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.61 kg |
| Paired article numbers | 36875 |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | for control arm |
| Mounting points diameter | 17.4 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.578 kg |
| Placement on Vehicle | both sides |
| Length | 95 mm |
| Material | Rubber/Metal |
| Outer diameter | 58 mm |
| Inner diameter | 16 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1735 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Weight | 0.211 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1526 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Weight | 0.180 kg |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Bore Diameter | 23.81 mm |
| Fill Medium | Brake Fluid |
| Weight | 0.054 kg |
| Function | Repair Kit, clutch master cylinder |
| Type | Repair Kit, clutch master cylinder |
| for OE number | 000 290 46 67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.610 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 36877 |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Cone Size | 20 mm |
| Mounting points diameter | 17.4 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.27 kg |
| Inner diameter 1 | 38 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Material | Rubber |
| Length | 100 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30964)
- 1x Febi Nut, kingpin (01841)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
£17.76
Important compatibility info
| Weight | 0.670 kg |
| Placement on Vehicle | Front Axle |
| Length | 70 mm |
| Width | 70 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Thickness | 75 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.060 kg |
| Cable Length | 785 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.61 kg |
| Additional Information 2 | with fastening material, with ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| for OE number | 5031.77 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19495)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£17.76
Important compatibility info
| Weight | 0.060 kg |
| Length | 115 mm |
| Width | 166 mm |
| Thickness | 2 mm |
| Inner diameter | 63 mm |
| Function | Gasket, charge air cooler |
| Type | Gasket, charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.073 kg |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176083)
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| Weight | 0.113 kg |
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (06622)
- 2x Febi Gasket, cylinder head cover (09766)
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.060 kg |
| Cable Length | 725 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 101989 |
| Function | Lock Cylinder |
| Type | Lock Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.585 kg |
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 99 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Nut, kingpin (01841)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.226 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186114)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)
£17.76
Important compatibility info
| Housing length | 378.5 mm |
| Mounting points diameter | 16.5 mm |
| Weight | 0.321 kg |
| Placement on Vehicle | both sides |
| Length | 715 mm |
| Eject Force | 160 N |
| Stroke | 318 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 2.15 kg |
| Inner diameter | 80 mm |
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Length | 640 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023