Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.073 kg |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 28 mm |
Material | Thermoplastic polyester elastomer |
Placement on Vehicle | Wheel Side, Front Axle |
Length | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176083)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 315 mm |
Height | 55 mm |
Width | 195 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Weight | 0.280 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Length | 640 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.585 kg |
Placement on Vehicle | Rear Axle, transmission sided |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Length | 99 mm |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Nut, kingpin (01841)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.670 kg |
Placement on Vehicle | Front Axle |
Length | 70 mm |
Width | 70 mm |
Material | Rubber/Metal |
Outer diameter | 75 mm |
Thickness | 75 mm |
Inner diameter | 20 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Length | 115 mm |
Width | 166 mm |
Thickness | 2 mm |
Inner diameter | 63 mm |
Function | Gasket, charge air cooler |
Type | Gasket, charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 984 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Weight | 0.05 kg |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.113 kg |
Material | ACM (Polyacrylate) |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (06622)
- 2x Febi Gasket, cylinder head cover (09766)
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.77 kg |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Right |
Length | 186 mm |
Material | Steel |
Paired article numbers | 34310 |
Surface | Phosphatized |
Internal Thread Size | M15 x 1,5 |
Extra Description | ProKit |
Replaces | 43219 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.15 kg |
Inner diameter | 80 mm |
Length | 1 m |
Function | Corrugated Pipe, exhaust system |
Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 298 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Spanner Size | 16 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 105.5 mm |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 14 mm |
Width | 38 mm |
Wear Warning Contact | with acoustic wear warning |
Weight | 0.769 kg |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear |
Weight | 0.6 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Height | 32 mm |
Outer diameter | 403 mm |
Inner diameter | 230 mm |
Paired article numbers | 196022 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bushing, axle beam |
Material | Rubber/Metal |
Outer diameter | 41.2 mm |
Weight | 0.300 kg |
Inner diameter | 17.1 mm |
Thickness | 52.5 mm |
Function | Bushing, axle beam |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Function | Protection Lid, wheel hub |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thickness | 40 mm |
Width | 160 mm |
Length | 160 mm |
Weight | 0.435 kg |
Type | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Protection Lid, wheel hub (35169)
- 1x Febi Seal Ring, wheel hub (35168)
Important compatibility info
Placement on Vehicle | Front and Rear |
Weight | 0.63 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Height | 33 mm |
Outer diameter | 407 mm |
Inner diameter | 229 mm |
Paired article numbers | 196032 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.779 kg |
Placement on Vehicle | Front Axle Right |
Length | 215 mm |
Paired article numbers | 106845 |
Function | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Joint Type | Tripod Joint |
Length | 92 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 66 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174371)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 95 mm |
Width | 47.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 0.86 kg |
Additional Information 2 | with fastening material |
Replaces | 16715 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Colour | Black |
Material | Plastic |
Length | 85 mm |
Type | Sensor, coolant level |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.785 kg |
Width | 40 mm |
Outer diameter | 74 mm |
Inner diameter | 40 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information | with axle nut, with Split Pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 16.5 mm |
Function | Ball Joint |
Weight | 0.67 kg |
Extra Description | ProKit |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 59 mm |
Filter type | Filter Insert |
Type | Air Filter |
Weight | 0.270 kg |
Length | 221 mm |
Function | Air Filter |
Width | 188 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter Set, cabin air |
Filter type | Pollen Filter |
Length | 328 mm |
Height | 29.5 mm |
Width | 172 mm |
Type | Filter Set, cabin air |
Weight | 0.142 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, timing case cover |
Material | PA (polyamide), Silicone |
Weight | 0.018 kg |
Type | Gasket, timing case cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Cooling Hose | from engine to water pump |
Function | Radiator Hose |
Weight | 0.264 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 485 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Weight | 0.295 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 304 mm |
Material | Plastic |
Rod/Strut | Coupling Rod |
Width | 29 mm |
Thickness | 39 mm |
Thread Length | 27 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 06241 |
Length | 120 mm |
Function | Angled Ball Joint, steering drag link |
Cone Size | 31.5 mm |
Thread Type | with left-hand thread |
External Thread Size | M30 x 1,5 LHT, M24 x 1,5 |
Weight | 1.74 kg |
Additional Information 2 | with crown nut |
Extra Description | ProKit |
Type | Angled Ball Joint, steering drag link |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 37 mm |
Outer diameter | 75 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing |
Weight | 0.58 kg |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | FPM (fluoride rubber) |
Length 4 | 14.6 mm |
Type | Shaft Seal, differential |
Function | Shaft Seal, differential |
Weight | 0.070 kg |
Height 1 | 10 mm |
Inner diameter | 68 mm |
Outer diameter | 102 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.187 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 860869 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.78 kg |
Function | Angled Ball Joint, steering drag link |
Thread Type | with right-hand thread |
External Thread Size | M30 x 1,5 RHT, M24 x 1,5 |
Placement on Vehicle | Front Axle |
Length | 120 mm |
Paired article numbers | 03941 |
Cone Size | 31.5 mm |
Extra Description | ProKit |
Type | Angled Ball Joint, steering drag link |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5, M14 x 1,5 |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle |
Length | 95 mm |
Paired article numbers | 03387 |
Thread Type | with left-hand thread |
Cone Size | 18 mm |
Pipe Diameter | 24 mm |
Function | Tie Rod End |
Weight | 0.497 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle |
Weight | 0.765 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 317 mm |
Housing Diameter | 18 mm |
Eject Force | 550 N |
Stroke | 65 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, rear window |
Weight | 0.153 kg |
Type | Gas Spring, rear window |
Housing length | 213.5 mm |
Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.318 kg |
Placement on Vehicle | Front Axle |
Length | 123 mm |
Width | 53.3 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 92 mm |
Function | Holder, engine mounting system |
Placement on Vehicle | Front, Upper |
Weight | 0.300 kg |
Material | Rubber/Metal |
Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1706 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.319 kg |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | with screw |
for OE number | 98 109 610 80 |
Number of Connectors / Ports | 2 |
Weight | 0.010 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 183 mm |
Function | Fuel Filter |
Weight | 0.326 kg |
Filter type | Spin-on Filter, with water drain screw |
Inner diameter | 17 mm |
Outer diameter | 85 mm |
Type | Fuel Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M18 x 1,5 |
Weight | 0.633 kg |
Placement on Vehicle | Front Axle Left |
Length | 117 mm |
Paired article numbers | 171610 |
Function | Tie Rod End |
Extra Description | ProKit |
External Thread Size | M14 x 2 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.902 kg |
Placement on Vehicle | Front Axle Right |
Length | 187 mm |
Spanner Size | 18 |
Paired article numbers | 106867 |
Function | Tie Rod End |
External Thread Size | M12 x 1,75 |
Additional Information | with lock nut |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.902 kg |
Placement on Vehicle | Front Axle Left |
Length | 187 mm |
Spanner Size | 18 |
Function | Tie Rod End |
Paired article numbers | 106866 |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,75 |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Type | V-Ribbed Belt |
Length | 1570 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.151 kg |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.150 kg |
Material | Aluminium |
Opening Temperature | 92 °C. 107 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Function | Air Filter |
Placement on Vehicle | Front, Right |
Length | 258 mm |
Height | 58 mm |
Width | 230 mm |
Filter type | Filter Insert |
Weight | 0.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Lower |
Weight | 0.85 kg |
Paired article numbers | 42112 |
External Thread Size | M14 x 2 |
Cone Size | 17.5 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.97 kg |
Length | 208 mm |
Function | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M27 x 1,5, M20 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.151 kg |
Inner diameter 2 | 73 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Function | Bellow Kit, drive shaft |
Length | 100 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175982)
- 1x Febi Molybdenum Grease (02582)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023