Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39603 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Internal Thread Size | M10 x 1,5 LHT |
| Extra Description | ProKit |
| Function | Ball Head, gearshift linkage |
| Type | Ball Head, gearshift linkage |
| Cone Size | 10 mm |
| Paired article numbers | 36326 |
| Length | 55 mm |
| Placement on Vehicle | transmission sided |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 62 mm |
| Thickness | 121 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 50 mm |
| Length | 1596 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 75 mm |
| Steering arm type | for trailing arm |
| Function | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring, with spacer disc |
| Mounting points diameter | 21 mm |
| Type | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| for OE number | 1376 728 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 27.15 mm |
| Width | 14 mm |
| Operating Mode | Mechanical |
| Spanner Size | 14 |
| Function | Valve, fuel supply system |
| Valve type | Non-Return Valve |
| External Thread Size | M10 x 1,5 |
| Type | Valve, fuel supply system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Width | 48 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 77 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Width | 39 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 194 mm. 129 mm |
| Thickness | 85.6 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 9 |
| Parameter | 5PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 99 mm |
| Function | Suspension Spring |
| Length | 336 mm |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 13 mm |
| Placement on Vehicle | Front Axle |
| Length | 339 mm |
| Outer diameter | 165 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Suspension Spring |
| Length | 388 mm |
| Outer diameter | 152 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Number of Coils | 5.1 |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 10 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 292 mm |
| Colour | black |
| Hole Spacing | 260 mm |
| Material | Steel |
| Type | Link/Coupling Rod, stabiliser bar |
| Replaces | 41032 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39645 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with screw, with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39627)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39644 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with screw, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39628)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 86 mm |
| Cone Size | 31.5 mm |
| Additional Information | with crown nut and split pin |
| Internal Thread Size | M22 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 373 mm |
| Spanner Size | 41 |
| Paired article numbers | 39678 |
| Function | Tie Rod |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39673)
- 1x Febi Nut (38356)
Important compatibility info
| Additional Information | with lock nut |
| Function | Tie Rod |
| Paired article numbers | 39677 |
| Spanner Size | 41 |
| Length | 373 mm |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39674)
- 1x Febi Nut (38356)
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Additional Information | with seal rings |
| Number of Teeth | 20 |
| Housing Type | with housing |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 23.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Outer diameter | 55.5 mm |
| Inner diameter | 14.3 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tilt Pump, driver cab |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Hole Spacing | 75 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 271 mm |
| Thickness | 40.8 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 209.5 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Operating Mode | Manual |
| Spanner Size | 22 |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 669 mm |
| Housing Diameter | 19 mm |
| Eject Force | 200 N |
| Stroke | 286 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 359.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 283 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 382 mm |
| Length | 721 mm |
| Housing Diameter | 18 mm |
| Eject Force | 180 N |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 153 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 243 mm |
| Length | 424 mm |
| Housing Diameter | 18 mm |
| Eject Force | 280 N. 350 N |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 1 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 6 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 110.5 mm. 100.5 mm |
| Function | Bellow, air suspension |
| External Thread Size | M6 x 1 |
| Height | 138 mm |
| Type | Bellow, air suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























