Proud to be a UK-based company
Contact us
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 66 mm |
| Inner diameter 2 | 63 mm |
| Outer diameter 1 | 78 mm |
| Outer diameter 2 | 75 mm |
| Cooling Hose | from thermostat to radiator |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.41
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 170217 |
| Function | Sensor, wheel speed |
| Cable Length | 940 mm |
| Type | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.41
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tensioner, timing chain |
| Length | 60 mm |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.41
Important compatibility info
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34311 |
| Surface | Phosphatized |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Internal Thread Size | M15 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Replaces | 43218 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Outer diameter | 72 mm |
| Function | Wheel Bearing Kit |
| Inner diameter | 39 mm |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (03271)
- 1x Febi Nut, kingpin (03831)
- 1x Febi Circlip (06312)
£17.42
Important compatibility info
| Function | Sensor, camshaft position |
| Number of Connectors / Ports | 3 |
| Length | 57.5 mm |
| Replaces | 32081 |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Cone Size | 18 mm |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Paired article numbers | 43205 |
| Spanner Size | 19 |
| Thickness | 79 mm |
| Width | 37 mm |
| Length | 215 mm |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Function | Tie Rod End |
| Spanner Size | 19 |
| Width | 37 mm |
| Paired article numbers | 43204 |
| Thickness | 79 mm |
| Length | 215 mm |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Function | Air Filter |
| Width | 220 mm |
| Height | 68 mm |
| Length | 270 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Length | 357 mm |
| Height | 36 mm |
| Filter type | Activated Carbon Filter |
| Width | 162 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Filter type | Filter Insert |
| Function | Fuel filter |
| Height | 118 mm |
| Outer diameter | 111 mm |
| Additional Information | with gaskets/seals |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34310 |
| Surface | Phosphatized |
| Internal Thread Size | M15 x 1,5 |
| Extra Description | ProKit |
| Replaces | 43219 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 6 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.42
Important compatibility info
| Material | Plastic |
| Outer diameter | 60 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Placement on Vehicle | Rear Axle Lower, inner |
| Length | 95 mm |
| Inner diameter | 55 mm |
| Material | Rubber/Metal |
| Outer diameter | 80 mm. 92 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Outer diameter 1 | 19 mm |
| Outer diameter 2 | 42 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle, outer |
| Inner diameter | 16 mm |
| Length | 130 mm |
| Hole Spacing | 100 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Right |
| Material | Thermoplast |
| Inner diameter 1 | 37 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 116 mm |
| Inner diameter 2 | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172863)
- 1x Febi Molybdenum Grease (02582)
£17.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023