Important compatibility info
Function | Filter Set, cabin air |
Filter type | Pollen Filter |
Length | 328 mm |
Height | 29.5 mm |
Width | 172 mm |
Type | Filter Set, cabin air |
Weight | 0.142 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, timing case cover |
Material | PA (polyamide), Silicone |
Weight | 0.018 kg |
Type | Gasket, timing case cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 16.5 mm |
Function | Ball Joint |
Weight | 0.67 kg |
Extra Description | ProKit |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Joint Type | Tripod Joint |
Length | 92 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 66 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174371)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 95 mm |
Width | 47.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 0.86 kg |
Additional Information 2 | with fastening material |
Replaces | 16715 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Colour | Black |
Material | Plastic |
Length | 85 mm |
Type | Sensor, coolant level |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Weight | 0.295 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 304 mm |
Material | Plastic |
Rod/Strut | Coupling Rod |
Width | 29 mm |
Thickness | 39 mm |
Thread Length | 27 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 06241 |
Length | 120 mm |
Function | Angled Ball Joint, steering push rod |
Cone Size | 31.5 mm |
Thread Type | with left-hand thread |
External Thread Size | M30 x 1,5 LHT, M24 x 1,5 |
Weight | 1.74 kg |
Additional Information 2 | with crown nut |
Extra Description | ProKit |
Type | Angled Ball Joint, steering push rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.78 kg |
Function | Angled Ball Joint, steering push rod |
Thread Type | with right-hand thread |
External Thread Size | M30 x 1,5 RHT, M24 x 1,5 |
Placement on Vehicle | Front Axle |
Length | 120 mm |
Paired article numbers | 03941 |
Cone Size | 31.5 mm |
Extra Description | ProKit |
Type | Angled Ball Joint, steering push rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Placement on Vehicle | Front |
Length | 910 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5, M14 x 1,5 |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle |
Length | 95 mm |
Paired article numbers | 03387 |
Thread Type | with left-hand thread |
Cone Size | 18 mm |
Pipe Diameter | 24 mm |
Function | Tie Rod End |
Weight | 0.497 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 37 mm |
Outer diameter | 75 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing |
Weight | 0.58 kg |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.187 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 860869 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.318 kg |
Placement on Vehicle | Front Axle |
Length | 123 mm |
Width | 53.3 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 92 mm |
Function | Holder, engine mounting system |
Placement on Vehicle | Front, Upper |
Weight | 0.300 kg |
Material | Rubber/Metal |
Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1706 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle |
Weight | 0.765 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.319 kg |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | with screw |
for OE number | 98 109 610 80 |
Number of Connectors / Ports | 2 |
Weight | 0.010 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Type | V-Ribbed Belt |
Length | 1570 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.151 kg |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023