Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 12.9 mm |
| Mounting points diameter | 10.5 mm |
| External Thread Size | M12 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.65
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 18 mm |
| Outer diameter | 65 mm. 50 mm |
| Inner diameter | 35 mm. 21 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174060)
- 1x Febi Wheel Bearing (174059)
- 1x Febi Split Pin (173993)
£17.65
Important compatibility info
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10874)
- 1x Febi Suspension Strut Support Mount (10873)
- 1x Febi Nut (10893)
- 1x Febi Protective Cap/Bellow, shock absorber (109507)
£17.65
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.65
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 119 mm |
| Diameter | 1 mm |
| Material | Steel |
| Spanner Size | 22 |
| Paired article numbers | 183104 |
| Additional Information | with nuts |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 23 mm |
| Rod/Strut | Coupling Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.65
Important compatibility info
| Additional Information | with nuts |
| Rod/Strut | Coupling Rod |
| Spanner Size | 22 |
| Thread Length | 23 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M14 x 1,5 |
| Paired article numbers | 183102 |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 1 mm |
| Length | 119 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.65
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 885 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.65
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 32.5 mm |
| Thickness | 145 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 129.3 mm |
| Width | 57 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 2000 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Length | 75 mm |
| Width | 80 mm |
| Thickness | 46 mm |
| Voltage | 28 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Hole Spacing | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Length | 279 mm |
| Outer diameter | 81 mm |
| Pipe Diameter | 10 mm. 8 mm |
| Function | Fuel filter |
| Filter type | In-Line Filter, without connection for water sensor, without water drain screw |
| Type | Fuel filter |
| Replaces | 103010 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Paired article numbers | 180232 |
| Length | 716 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (27847)
- 2x Febi Protective Cap/Bellow, shock absorber (28529)
£17.66
Important compatibility info
| Length | 169.9 mm |
| Valve stem diameter | 9.9 mm |
| Valve head diameter | 43.98 mm |
| Notches / Holes Number | 4 |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Width | 105 mm |
| Thickness | 130 mm |
| Length | 250 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Hole Spacing | 170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Colour | Green |
| Function | Gasket, automatic transmission oil sump |
| Material | Paper |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.67
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.67
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023