Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.3 kg |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (102984)
- 1x Febi Rolling Bearing, suspension strut support mount (37750)
£18.09
Important compatibility info
| Length | 343 mm |
| Outer thread | M14 x 1,5 mm |
| Weight | 0.460 kg |
| Placement on Vehicle | Front Axle left or right |
| Type | Tie Rod Axle Joint |
| Function | Tie Rod Axle Joint |
| Driver Position | for left-hand drive vehicles |
£18.09
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Weight | 0.86 kg |
| Placement on Vehicle | inner |
| Width | 30 mm |
| Inner diameter | 55 mm |
| Outer diameter | 95 mm |
| Bearing Code | 33111 |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.09
Important compatibility info
| Weight | 0.202 kg |
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (09103)
- 4x Febi Seal Ring, spark plug shaft (31721)
£18.09
Important compatibility info
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Mounting points diameter | 12.1 mm |
| Cone Size | 16.1 mm |
| Extra Description | ProKit |
| Weight | 1.14 kg |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws, with washers |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| for OE number | 124 410 07 81 |
| Weight | 0.288 kg |
| Material | Rubber/Metal |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| Weight | 0.860 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Cone Size | 20 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 37631 |
| Function | Tie Rod |
| Weight | 0.910 kg |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19604)
- 1x Febi Inner Tie Rod (28466)
£18.10
Important compatibility info
| Weight | 0.910 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 37632 |
| Function | Tie Rod |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19605)
- 1x Febi Inner Tie Rod (28466)
£18.10
Important compatibility info
| Placement on Vehicle | Rear Axle Lower, inner |
| Length | 95 mm |
| Weight | 0.503 kg |
| Inner diameter | 55 mm |
| Material | Rubber/Metal |
| Outer diameter | 80 mm. 92 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Weight | 0.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| Function | Bush, spring eye |
| Placement on Vehicle | Rear Axle, Rear |
| Weight | 0.4 kg |
| Type | Bush, spring eye |
| Outer diameter 2 | 68 mm |
| Outer diameter 1 | 58 mm |
| Inner diameter | 36 mm |
| Length | 96 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| Outer diameter 1 | 19 mm |
| Outer diameter 2 | 42 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle, outer |
| Inner diameter | 16 mm |
| Length | 130 mm |
| Hole Spacing | 100 mm |
| Weight | 0.420 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.10
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Weight | 0.111 kg |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Replaces | 23128; 33982 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.11
Important compatibility info
| Weight | 0.073 kg |
| Length | 55 mm |
| Spanner Size | 22 |
| Opening Pressure | 4 bar |
| Function | Overflow Valve |
| External Thread Size | M16 x 1,5 |
| Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.11
Important compatibility info
| Inspection Tag | EMC |
| Width | 130 mm |
| Weight | 0.047 kg |
| Colour | Red |
| Port / Connector type | PRS |
| Light Design | LED |
| Mounting bores distance | 116 mm |
| Voltage to | 24 V |
| Voltage from | 12 V |
| Depth | 14 mm |
| Cable Length | 500 mm |
| Protection Type (IP Code) | IP67 |
| Function | End Outline Marker Light |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R10, R3, R7 |
| Height | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.11
Important compatibility info
| Function | End Outline Marker Light |
| Light Design | LED |
| Weight | 0.060 kg |
| Fulfils ECE norm | R3, R7 |
| Port / Connector type | PRS |
| Type | End Outline Marker Light |
| Protection Type (IP Code) | IP67 |
| Voltage to | 24 V |
| Voltage from | 12 V |
| Colour | White |
| Height | 32 mm |
| Width | 130 mm |
| Cable Length | 500 mm |
| Depth | 15 mm |
| Mounting bores distance | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.11
Important compatibility info
| Material | Rubber/Metal |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Weight | 0.235 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.11
Important compatibility info
| Length | 121 mm |
| Material | Thermoplast |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 86 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Weight | 0.179 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172856)
- 1x Febi Molybdenum Grease (02582)
£18.12
Important compatibility info
| Outer diameter | 138 mm |
| Length | 344 mm |
| Function | Suspension Spring |
| Number of Coils | 5.2 |
| Type | Suspension Spring |
| Weight | 1.44 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.12
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023