Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 174 mm |
| Width | 123 mm |
| Outer diameter | 53 mm |
| Thickness | 42 mm |
| Inner diameter | 22 mm |
| Internal Thread Size | M8 x 1,25 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Bearing, selector-/shift rod |
| Type | Bearing, selector-/shift rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 157.5 mm |
| Thickness | 114 mm |
| Inner diameter | 32 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 40 mm |
| Thickness | 81 mm |
| Thread Length | 46 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 10.9 |
| Function | Axle Bolt, drive shaft |
| Screw length below head | 60 mm |
| Type | Axle Bolt, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.42
Important compatibility info
| Extra Description | Basic Short Kit |
| Function | Timing Chain Kit |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 126 |
| Type | Timing Chain Kit |
| Timing Chain Size | D67ZN |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (25298)
- 1x Febi Tensioner, timing chain (01382)
- 1x Febi Timing Chain (09234)
- 1x Febi Guide, timing chain (10409)
- 1x Febi Guide, timing chain (25300)
£93.80
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40624 |
| Cone Size | 18 mm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28095)
- 1x Febi Fastening Bolt, control arm (40518)
- 2x Febi Fastening Bolt, control arm (32417)
£64.89
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40626 |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, control arm (32417)
- 1x Febi Control/Trailing Arm, wheel suspension (31845)
- 1x Febi Fastening Bolt, control arm (40518)
£55.28
Important compatibility info
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40625 |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31846)
- 1x Febi Fastening Bolt, control arm (40518)
- 2x Febi Fastening Bolt, control arm (32417)
£55.28
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Bushing, leaf spring |
| Length | 96 mm |
| Outer diameter | 60 mm |
| Inner diameter | 24.3 mm |
| Type | Bushing, leaf spring |
| Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.86
Important compatibility info
| Outer diameter | 450 mm |
| Thickness | 130 mm |
| Number of Connectors / Ports | 2 |
| Rated Power | 130 W |
| Number of Wings | 6 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.48
Important compatibility info
| Function | Fan, engine cooling |
| Number of Wings | 7 |
| Number of Connectors / Ports | 2 |
| Rated Power | 450 W |
| Thickness | 100 mm |
| Outer diameter | 420 mm |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.28
Important compatibility info
| Number of Wings | 5 |
| Function | Fan, engine cooling |
| Rated Power | 100 W |
| Thickness | 150 mm |
| Number of Connectors / Ports | 2 |
| Outer diameter | 340 mm |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.79
Important compatibility info
| Length | 376 mm |
| Spanner Size | 32 |
| Function | Pressure Hose, air compressor |
| Type | Pressure Hose, air compressor |
| External Thread Size | M26 x 1,5 |
| Internal Thread Size | M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.74
Important compatibility info
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 284 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 124 mm |
| Centering Diameter | 107.2 mm |
| Rotor Style | Solid |
| Surface | Coated |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.58
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Additional Information | with spacer ring |
| Additional Information 2 | with spacer disc, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.47
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Mounting points diameter | 6.8 mm |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.63
Important compatibility info
| Width | 48 mm |
| Outer diameter | 85 mm |
| Thickness | 84 mm |
| Inner diameter | 29 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.16
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 68 mm |
| Outer diameter | 79 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Replaces | 26380 |
| Outer diameter 1 | 136 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.48
Important compatibility info
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Thickness | 63 mm |
| Inner diameter | 27 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.31
Important compatibility info
| External Thread Size | M12 x 1,5, M10 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 40669 |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40666)
- 1x Febi Nut (39159)
- 3x Febi Nut, ball joint (36734)
£13.30
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 40668 |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5, M10 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40667)
- 1x Febi Nut (39159)
- 3x Febi Nut, ball joint (36734)
£13.30
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 130 |
| Chain Type | Silent Chain, Closed chain |
| Replaces | 46792 |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Warning! This timing chain kit can only be installed if the timing chain drive system has been not modified by the OE manufacturer. This can be established by checking the service history of the vehicle or by checking the OE part numbers on the modified camshaft adjusters (03C 109 571 K / 03C 109 088 G). Please note our technical information.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
£62.36
Important compatibility info
| Additional Information 2 | with seal ring |
| Function | Thermostat, coolant |
| Outer diameter | 80 mm |
| Opening Temperature | 76 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40681 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32443)
- 2x Febi Screw (40664)
- 1x Febi Screw (40663)
- 1x Febi Nut (28702)
£44.17
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40680 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32444)
- 2x Febi Screw (40664)
- 1x Febi Screw (40663)
- 1x Febi Nut (28702)
£44.17
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 54 mm |
| Width | 50 mm |
| Outer diameter | 90 mm |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.21
Important compatibility info
| Function | Repair Kit, steering idler arm |
| Type | Repair Kit, steering idler arm |
| Inner diameter | 55.2 mm |
| Width | 69 mm |
| Outer diameter | 60.2 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.45
Important compatibility info
| Outer diameter | 185 mm |
| Thickness | 13 mm |
| Inner diameter | 145 mm |
| Placement on Vehicle | transmission sided |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 128 mm |
| Width | 58 mm |
| Material | PU (Polyurethane) |
| Thickness | 126 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.70
Important compatibility info
| Thickness | 87 mm |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.34
Important compatibility info
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Outer diameter | 83 mm |
| Width | 44 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.45
Important compatibility info
| Length | 1512 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.25
Important compatibility info
| Length | 1526 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.22
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40710 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with nut, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (34760)
- 2x Febi Screw (40664)
- 1x Febi Screw (40708)
- 1x Febi Nut (10638)
£48.01
Important compatibility info
| Length | 1817 mm |
| Material | CR (chloroprene rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| One-sided / Double-sided | Double-sided |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.21
Important compatibility info
| Function | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Additional Information 2 | Requires special tools for mounting |
| DIN / ISO | 7867 |
| Number of Ribs | 4 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1102 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 844 mm |
| Function | V-Ribbed Belt |
| DIN / ISO | 7867 |
| Number of Ribs | 4 |
| Chemical Properties | Elastic |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.42
Important compatibility info
| Chemical Properties | Elastic |
| Additional Information 2 | Requires special tools for mounting |
| Length | 867 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| DIN / ISO | 7867 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.63
Important compatibility info
| Number of Ribs | 4 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 906 mm |
| Additional Information 2 | Requires special tools for mounting |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.98
Important compatibility info
| Opening Pressure | 1.5 bar |
| Function | Cap, coolant tank |
| Material | Plastic |
| Type | Cap, coolant tank |
| for OE number | 3B0 121 321 |
| Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.31
Important compatibility info
| Material | Plastic |
| Opening Pressure | 1.5 bar |
| Function | Cap, coolant tank |
| Type | Cap, coolant tank |
| for OE number | 8E0 121 321 |
| Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.74
Important compatibility info
| Opening Pressure | 1.5 bar |
| Function | Cap, coolant tank |
| Material | Plastic |
| Type | Cap, coolant tank |
| for OE number | 1H0 121 321 D |
| Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.44
Important compatibility info
| Placement on Vehicle | Front |
| Length | 90 mm |
| Outer diameter | 38 mm |
| Inner diameter | 16 mm |
| Type | Bush, driver cab suspension |
| Function | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.85
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Type | with right-hand thread |
| Rod/Strut | Coupling Rod |
| Length | 345 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 18 |
| Material | Steel |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.00
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Internal Thread Size | M10 x 1,5 |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 60 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.29
Important compatibility info
| Material | Rubber/Metal |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear, both sides |
| Thickness | 103 mm |
| Thread Length | 27 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.54
Important compatibility info
| Outer diameter | 37 mm |
| Spanner Size | 18 |
| Surface | Phosphatized, Oiled |
| Quality/ Grade | 10.9 |
| Function | Pulley Bolt |
| Screw length below head | 29 mm |
| Type | Pulley Bolt |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.60
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Outer diameter | 36 mm |
| Spanner Size | 18 |
| Surface | Phosphatized, Oiled |
| Quality/ Grade | 10.9 |
| Function | Pulley Bolt |
| Screw length below head | 44 mm |
| Type | Pulley Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.75
Important compatibility info
| Bolt / Nut Version | with lockwasher |
| External Thread Size | M14 x 1,5 |
| Outer diameter | 39.5 mm |
| Spanner Size | 18 |
| Surface | Phosphatized, Oiled |
| Quality/ Grade | 10.9 |
| Function | Pulley Bolt |
| Screw length below head | 80 mm |
| Type | Pulley Bolt |
| Placement on Vehicle | frontal sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.04
Important compatibility info
| Thickness | 72 mm |
| Inner diameter | 35 mm |
| Function | Mounting, stabiliser bar |
| Length | 42 mm |
| Width | 65 mm |
| Material | Rubber |
| Outer diameter | 65 mm |
| Placement on Vehicle | Lower Front Axle, outer |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023