Important compatibility info
| Function | Valve, crankcase ventilation |
| Type | Valve, crankcase ventilation |
| Material | Plastic, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Mechanical |
| Function | Fuel Pump |
| Type | Fuel Pump |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 2 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 21 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Inner diameter | 13 mm |
| Function | Gasket, oil filter housing |
| Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M40 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right |
| Length | 237 mm |
| Outer diameter | 40 mm. 53 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with plain bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35086)
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Suspension Rod |
| Material | Steel |
| Length | 310 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 333 mm |
| Voltage | 24 V |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | with wipe-wash function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| for OE number | 20553738 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Steering Column Switch |
| Length | 333 mm |
| Voltage | 24 V |
| Combi Switch Function | with wipe-wash function |
| Number of Connectors / Ports | 12 |
| Type | Steering Column Switch |
| for OE number | 20553740 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 695 mm |
| Function | Cable Pull, door release |
| Type | Cable Pull, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 866 mm |
| Housing Diameter | 22 mm |
| Eject Force | 430 N |
| Stroke | 350 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 489 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 482 mm |
| Housing Diameter | 18 mm |
| Eject Force | 480 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 270.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 294 mm |
| Housing Diameter | 18 mm |
| Eject Force | 410 N |
| Stroke | 88 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 175.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Valve, crankcase ventilation |
| Type | Valve, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 210 mm |
| Width | 45 mm |
| Material | Sheet Steel |
| Thickness | 66 mm |
| Inner diameter | 10.5 mm |
| Inner diameter 1 | 8 mm |
| Radius | 22 mm |
| Function | Bracket, stabiliser mounting |
| Paired article numbers | 40911 |
| Type | Bracket, stabiliser mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 212 mm |
| Material | Thermoplast |
| Inner diameter 2 | 52 mm |
| Function | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
| Inner diameter 1 | 16 mm |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (40914)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38763)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 883 mm |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (34744)
- 6x Febi Screw (43595)
Important compatibility info
| Placement on Vehicle | Rear |
| Function | Wiper Motor |
| Voltage | 12 V |
| Type | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 200 mm |
| Width | 120 mm |
| Thickness | 165 mm |
| Function | Mounting, leaf spring |
| Internal Thread Size | M20 x 2 |
| Hole Spacing | 60 mm. 170 mm |
| Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 345 mm |
| Width | 236 mm |
| Thickness | 237 mm |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 920 mm |
| Width | 32 mm |
| Outer diameter | 74 mm |
| Function | Support, radiator fan |
| Type | Support, radiator fan |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 30 mm |
| Pipe Diameter | 9 mm |
| Spanner Size | 17 |
| Material | Steel |
| Placement on Vehicle | Front Axle Right |
| Length | 292 mm |
| Paired article numbers | 40955 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 155 mm |
| Width | 92 mm |
| Outer diameter | 55 mm |
| Opening Temperature | 80 °C. 87 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 190 mm |
| Function | Brake Hose |
| Additional Information 2 | with banjo bolt |
| Type | Brake Hose |
| External Thread Size | M10 x 1, M12 x 1 |
| Paired article numbers | 40962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 190 mm |
| Function | Brake Hose |
| Additional Information 2 | with banjo bolt |
| External Thread Size | M10 x 1, M12 x 1 |
| Type | Brake Hose |
| Paired article numbers | 40961 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 333 mm |
| Height | 58 mm |
| Width | 217 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 32 mm |
| Number of Ribs | 4 |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 38 mm |
| Outer diameter | 60 mm. 46 mm |
| Inner diameter | 19.8 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023




























