Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 123 mm |
| Spanner Size | 24 |
| Type | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.00
Important compatibility info
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
| Cone Size | 28.6 mm |
| Colour | Grey |
| Thread Length | 85 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 120 mm |
| Material | Steel |
| Outer diameter | 23.5 mm. 69 mm |
| Thickness | 120 mm |
| Spanner Size | 30 |
| Paired article numbers | 06240 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M30 x 1,5 LHT, M20 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Colour | Grey |
| Outer diameter | 24 mm. 70 mm |
| Material | Steel |
| Spanner Size | 30 |
| Paired article numbers | 06239 |
| External Thread Size | M30 x 1,5 RHT, M20 x 1,5 |
| Cone Size | 28.6 mm |
| Thread Type | with right-hand thread |
| Thickness | 120 mm |
| Length | 120 mm. 87 mm |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Cable Length | 250 mm |
| Length | 335 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.01
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 41 mm |
| Inner diameter 2 | 25 mm |
| Outer diameter 1 | 73 mm |
| Width 1 | 19.5 mm |
| Outer diameter 2 | 52 mm |
| Width 2 | 22 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08163)
- 1x Febi Wheel Bearing (08152)
- 1x Febi Shaft Seal, wheel bearing (08151)
£18.02
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 137.8 mm |
| Width | 51.2 mm. 49 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Width | 45 mm |
| Outer diameter | 74 mm |
| Inner diameter | 37 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Additional Information | with grease |
| Length | 129 mm |
| Material | Rubber |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 108 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Gasket, transfer case (08020)
- 6x Febi Bolt, drive shaft flange (09455)
- 1x Febi Circlip (09454)
- 1x Febi High Temperature Lubricant (03630)
£18.02
Important compatibility info
| Opening Temperature | 71 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11119)
- 1x Febi Seal, thermostat (10258)
£18.02
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 445 mm |
| Housing Diameter | 18 mm. 242 mm |
| Eject Force | 300 N |
| Stroke | 173 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 241.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 94.6 mm |
| Width | 52 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Length | 238 mm |
| Material | Paper |
| Outer diameter | 165 mm |
| Inner diameter | 93 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Replaces | 23128; 33982 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 210 mm |
| Paired article numbers | 39039 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Length | 236 mm |
| Housing Diameter | 15 mm |
| Eject Force | 85 N |
| Stroke | 80 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 133 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Intake Hose, air filter |
| for OE number | 13 54 1 740 931 |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (49037)
- 2x Febi Clamping Bolt, ball joint (32414)
£18.02
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Material | PU (Polyurethane), Plastic |
| Width | 87 mm |
| Length | 208 mm |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108831)
- 2x Febi Rubber Buffer, suspension (38574)
£18.02
Important compatibility info
| Depth | 24 mm |
| Protection Type (IP Code) | IP67 |
| Voltage from | 12 V |
| Mounting bores distance | 90 mm |
| Type | End Outline Marker Light |
| Width | 111 mm |
| Height | 50 mm |
| Function | End Outline Marker Light |
| Cable Length | 500 mm |
| Light Design | LED |
| Colour | Red |
| Port / Connector type | PRS |
| Voltage to | 24 V |
| Fulfils ECE norm | R3, R7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Left |
| Type | Gasket, cylinder head cover |
| for OE number | 07L 103 483 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 86.8 mm |
| Width | 70.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 19.7 mm |
| Mounting points diameter | 10.5 mm |
| Function | Ball Joint |
| External Thread Size | M18 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Width | 63 mm |
| Length | 126 mm |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Replaces | 174859 |
| Width | 40 mm |
| Additional Information | with Split Pin |
| Outer diameter | 80 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring |
| Inner diameter | 43 mm |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Split Pin (173993)
£18.03
Important compatibility info
| Function | Switch, clutch control (cruise control) |
| Type | Switch, clutch control (cruise control) |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Cable Length | 360 mm |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Inner diameter | 18 mm |
| Placement on Vehicle | Rear Axle Left, Rear |
| Outer diameter | 68 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, differential |
| Material | Rubber/Metal |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.03
Important compatibility info
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 99 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Nut, kingpin (01841)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
£18.04
Important compatibility info
| Width of castor bearing surface | 28 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.04
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 126 mm |
| Width | 63 mm |
| Material | Aluminium |
| Outer diameter | 54 mm |
| Inner diameter | 8 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 46 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 170 mm |
| Material | Aluminium |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with nut, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (38299)
- 1x Febi Nut (22263)
- 1x Febi Screw (37265)
- 1x Febi Screw (38298)
£18.05
Important compatibility info
| Housing length | 214 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | Right |
| Length | 390 mm |
| Eject Force | 360 N |
| Stroke | 152 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Placement on Vehicle | Front |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exterior temperature |
| Function | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Length | 1701 mm |
| Placement on Vehicle | Left Rear, Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 96 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 72 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18779)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38764)
- 1x Febi Molybdenum Grease (02582)
£18.06
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 19.6 mm |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with washers, with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Outer diameter | 61 mm |
| Length | 169 mm |
| Height | 61 mm |
| Width | 61 mm |
| Filter type | In-Line Filter |
| Seal Diameter | 23 mm |
| Pressure | 6.6 bar |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Extra Description | febi Plus |
| Inner diameter | 160 mm |
| Material | Steel |
| Outer diameter | 179 mm |
| Placement on Vehicle | Front Axle |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 1.5 mm² |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 12 V |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Mounting points diameter | 10.5 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | Rear Axle, inner |
| Material | Rubber/Metal |
| Outer diameter | 85 mm |
| Thickness | 72 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Camber correction | 0 ° |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Material | Aluminium |
| Outer diameter | 53 mm. 39.4 mm |
| Thickness | 52 mm. 32 mm |
| Inner diameter | 10.3 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 10.5 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 60 mm |
| Inner diameter | 42 mm |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Lower Front Axle, Rear Axle Lower |
| Thickness | 109 mm |
| Type | Mounting, shock absorber |
| Inner diameter | 22 mm |
| Function | Mounting, shock absorber |
| Outer diameter | 49.5 mm |
| External Thread Size | M16 x 2 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Function | Tie Rod End |
| Cone Size 2 | 15 mm |
| Cone Size 1 | 13 mm |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with crown nut |
| Spanner Size | 22 |
| Paired article numbers | 183070 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023