Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.51 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 171527 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.31
Important compatibility info
| Weight | 2.38 kg |
| Placement on Vehicle | Rear Axle |
| Length | 164.8 mm |
| Width | 66.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.2 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.31
Important compatibility info
| Weight | 0.580 kg |
| Placement on Vehicle | Rear Axle |
| Length | 82.8 mm |
| Width | 38.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.31
Important compatibility info
| Function | Gasket, cylinder head cover |
| Thickness | 7 mm |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | Right |
| Length | 579 mm |
| Width | 8 mm |
| Weight | 0.067 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.31
Important compatibility info
| Weight | 0.510 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 171528 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.31
Important compatibility info
| Weight | 0.311 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Material | PA (polyamide) |
| Weight | 0.07 kg |
| Cooling Hose | from oil cooler to engine block |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Cone Size | 18.7 mm |
| Weight | 0.52 kg |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Weight | 0.227 kg |
| Length | 1895 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Length | 180 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Diameter | 1 mm |
| Material | Steel |
| Additional Information 2 | with nut |
| Spanner Size | 21 |
| Rod/Strut | Coupling Rod |
| Thread Length | 30 mm |
| Weight | 0.657 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Weight | 0.58 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 144 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 97 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29917)
- 2x Febi Molybdenum Grease (02582)
- 1x Febi Axle Bolt, drive shaft (22462)
- 1x Febi Clamping Clip (45646)
- 1x Febi Clamping Clip (38758)
£18.32
Important compatibility info
| Function | Door Check |
| Weight | 0.323 kg |
| Placement on Vehicle | Right, Left |
| Type | Door Check |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Function | Shaft Seal, wheel bearing |
| Number of Teeth | 80 |
| Inner diameter | 81 mm |
| Outer diameter | 96 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.2 kg |
| Width | 10 mm |
| Material | FPM (fluoride rubber) |
| Type | Shaft Seal, wheel bearing |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 0.843 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.259 kg |
| Placement on Vehicle | Rear |
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
| for OE number | 20 65 156 99R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Weight | 0.321 kg |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 585 N |
| Stroke | 208 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 289 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.025 kg |
| Type | Ignition Switch |
| Function | Ignition Switch |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Weight | 0.15 kg |
| Placement on Vehicle | Front Axle |
| Height | 12 mm |
| Material | Steel |
| Outer diameter | 177 mm |
| Inner diameter | 144 mm |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Weight | 0.54 kg |
| Length | 77 mm |
| Material | Rubber/Metal |
| Outer diameter | 60.5 mm |
| Inner diameter | 12.5 mm |
| Placement on Vehicle | Rear Axle, Front |
| Function | Bush Set, axle beam |
| Type | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (17827)
£18.32
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 160 mm |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 0.628 kg |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023