Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.256 kg |
| Outer diameter | 145 mm |
| Thickness | 10 mm |
| Inner diameter | 96 mm |
| Type | Shaft Seal |
| Function | Shaft Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.01 kg |
| Type | Sensor, interior temperature |
| Function | Sensor, interior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Placement on Vehicle | Front, Left |
| Height | 39 mm |
| Length | 267 mm |
| Width | 216 mm |
| Filter type | Filter Insert |
| Weight | 0.234 kg |
| Type | Air Filter |
| Function | Air Filter |
| Paired article numbers | 179009 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Weight | 0.542 kg |
| Placement on Vehicle | Rear Axle |
| Length | 89.8 mm |
| Width | 54 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Placement on Vehicle | Front, Right |
| Length | 267 mm |
| Paired article numbers | 179010 |
| Filter type | Filter Insert |
| Type | Air Filter |
| Weight | 0.234 kg |
| Additional Information 2 | with pre-filter |
| Height | 39 mm |
| Width | 216 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 65 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42570 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.40
Important compatibility info
| Outer diameter 2 | 75 mm |
| Function | Charge Air Hose |
| Inner diameter 1 | 55 mm |
| Inner diameter 2 | 65 mm |
| Outer diameter 1 | 65 mm |
| Weight | 0.23 kg |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler |
| Turbocharger line | Charge air cooler to intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.40
Important compatibility info
| Weight | 0.171 kg |
| Length | 1675 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.41
Important compatibility info
| Length | 47.4 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.040 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.41
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.34 kg |
| Filter type | Screen Filter |
| Width | 134 mm |
| Additional Information 2 | with oil sump gasket |
| Seal Material | Rubber |
| Function | Hydraulic Filter Kit, automatic transmission |
| Height | 36 mm |
| Length | 158 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (08716)
- 1x Febi Hydraulic Filter, automatic transmission (06445)
- 1x Febi Seal Ring, oil screen (06436)
- 2x Febi Seal Ring, oil screen (06435)
£18.41
Important compatibility info
| Weight | 0.930 kg |
| Cone Size | 26 mm |
| Mounting points diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M20 x 1,5 |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.41
Important compatibility info
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Inner diameter | 8 mm |
| Weight | 0.201 kg |
| Mounting points diameter | 8 mm |
| Function | Deflection/Guide Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.41
Important compatibility info
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Length | 1701 mm |
| Weight | 0.394 kg |
| Placement on Vehicle | Left Rear, Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.41
Important compatibility info
| Additional Information | with axle nut, with retaining rings |
| Weight | 0.35 kg |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 72 mm |
| Width | 37 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, brake disc (04511)
- 1x Febi Nut, kingpin (02160)
- 2x Febi Circlip (05299)
£18.41
Important compatibility info
| Weight | 0.916 kg |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 233 mm |
| Material | Steel |
| Paired article numbers | 21415 |
| Additional Information | with counter nut |
| External Thread Size | M12 x 1,75 |
| Function | Tie Rod End |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 225 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Inner Tie Rod |
| Weight | 0.49 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Weight | 0.287 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 96 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 87 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (44714)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Circlip (09454)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
£18.42
Important compatibility info
| Weight | 0.260 kg |
| Filter type | Spin-on Filter |
| Inner diameter | 22 mm |
| Outer diameter | 84 mm |
| Height | 157 mm |
| Type | Fuel Filter |
| Function | Fuel Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Weight | 0.886 kg |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 224 mm |
| Paired article numbers | 170982 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.033 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Weight | 0.659 kg |
| Cone Size | 14.5 mm |
| Placement on Vehicle | Lower Front Axle |
| External Thread Size | M12 x 1,5 |
| Function | Ball Joint |
| Mounting points diameter | 10 mm |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Weight | 0.384 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Length | 82 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Outer diameter | 61 mm |
| Thickness | 82 mm |
| Inner diameter | 17 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Length | 102 mm |
| Inner diameter 2 | 70 mm |
| Inner diameter 1 | 26 mm |
| Placement on Vehicle | transmission sided, Front Axle Right |
| Weight | 0.193 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (181518)
- 1x Febi Molybdenum Grease (02582)
£18.42
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.59 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 341 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Weight | 0.886 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 224 mm |
| Paired article numbers | 170981 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.42
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Right |
| Length | 94 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.236 kg |
| Inner diameter 2 | 77 mm |
| Inner diameter 1 | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (177578)
- 1x Febi Molybdenum Grease (02582)
£18.43
Important compatibility info
| Weight | 0.210 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with clamp, with seal ring |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.43
Important compatibility info
| Length | 75 mm |
| Width | 80 mm |
| Thickness | 46 mm |
| Voltage | 28 V |
| Weight | 0.062 kg |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Hole Spacing | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.43
Important compatibility info
| Weight | 0.250 kg |
| Screw length below head | 17 mm |
| Function | Thrust Roller, release fork |
| Outer diameter | 30 mm |
| Height | 39 mm |
| Type | Thrust Roller, release fork |
| Inner diameter | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 76 mm |
| Width | 69 mm |
| Material | PU (Polyurethane) |
| Weight | 0.064 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Width | 51.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Function | Brake Pad Set, disc brake |
| Length | 94.8 mm |
| Type | Brake Pad Set, disc brake |
| Weight | 1.149 kg |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Weight | 0.295 kg |
| Outer diameter | 175 mm |
| Thickness | 27 mm |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (05352)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
£18.44
Important compatibility info
| Weight | 0.26 kg |
| Placement on Vehicle | Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Holder, engine mounting system |
| Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Outer diameter | 121 mm |
| Weight | 0.626 kg |
| Height | 140 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Additional Information 2 | with screw connection |
| Function | Towbar Socket |
| Type | Towbar Socket |
| DIN / ISO | 7638-1 EBS |
| Number of Connectors / Ports | 7 |
| Inspection Tag | ADR |
| Voltage | 24 V |
| Weight | 0.236 kg |
| Port / Connector type | 90° |
| Version | OE Standard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 84 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 68.9 mm |
| Inner diameter | 36.8 mm |
| Type | Mounting, stabiliser bar |
| Weight | 0.414 kg |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.44
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Weight | 0.226 kg |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 30 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 145 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176100)
- 1x Febi Molybdenum Grease (02582)
£18.44
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| External Thread Size | M12 x 1,5 |
| Type | Mounting, automatic transmission |
| Internal Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Weight | 0.511 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.410 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Weight | 0.174 kg |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Weight | 0.183 kg |
| Inner diameter | 8.3 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 40 mm |
| Material | Metal |
| Width | 29 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Weight | 1.35 kg |
| Placement on Vehicle | Rear Axle |
| Length | 116 mm |
| Width | 58.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Weight | 0.410 kg |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 120 mm |
| Outer diameter | 98 mm |
| Filter type | In-Line Filter, without water sensor |
| Additional Information | with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Weight | 0.660 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 221 mm |
| Paired article numbers | 43443 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.05 kg |
| Cable Length | 715 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.45
Important compatibility info
| Function | Hose, crankcase ventilation |
| Weight | 0.080 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| for OE number | 119 094 71 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.46
Important compatibility info
| Weight | 0.232 kg |
| Length | 2273 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.46
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.816 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.46
Important compatibility info
| Weight | 0.254 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023