Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 143 mm |
| Width | 51.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 123 mm |
| Width | 53.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 19 mm |
| Number of Teeth | 151 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 492 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 282.5 mm |
| Mounting points diameter | 18 mm |
| Stroke | 184 mm |
| Eject Force | 515 N |
| Housing Diameter | 18 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 153 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 205 mm |
| Thickness | 11 mm |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Outer diameter | 121 mm |
| Length | 332 mm |
| Inner diameter | 115 mm |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 101 mm |
| Inner diameter 1 | 32 mm |
| Material | Thermoplast |
| Length | 135 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101018)
- 1x Febi Clamping Clip (45646)
- 1x Febi Clamping Clip (29820)
- 2x Febi High Temperature Lubricant (03630)
Important compatibility info
| Length | 377 mm |
| Width | 152 mm |
| Thickness | 0.2 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5, M16 x 1 |
| Placement on Vehicle | Front Axle Right |
| Length | 335 mm |
| Function | Inner Tie Rod |
| Paired article numbers | 42316 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1745 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1890 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| Colour | Black |
| Material | Plastic |
| Type | Coolant Flange |
| for OE number | 17 11 1 438 820 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 115 mm |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 101 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101943)
- 1x Febi Clamping Clip (29819)
- 1x Febi Clamping Clip (45646)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 124 mm |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 97 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101945)
- 1x Febi Clamping Clip (29819)
- 1x Febi Clamping Clip (45645)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 92 mm |
| Material | Rubber/Metal |
| Colour Coding | White |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 14 mm |
| Thickness | 75 mm |
| Outer diameter | 76 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Front |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 69.1 mm |
| Material | Plastic |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 300 mm |
| Width | 30 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36722)
- 2x Febi Protective Cap/Bellow, shock absorber (36604)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1160 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Rotation Direction | Clockwise rotation |
| Outer diameter | 64 mm |
| Inner diameter | 51.5 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | frontal sided |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1168 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Front |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 213 mm |
| Width | 72 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (109595)
- 2x Febi Rubber Buffer, suspension (104210)
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 139 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 1 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 54 mm |
| Additional Information 2 | with seal ring |
| Opening Temperature | 88 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 815 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 16.7 mm. 14.6 mm |
| Outer diameter | 59 mm. 40 mm |
| Inner diameter | 32 mm. 17.5 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (04941)
- 1x Febi Screw (04946)
- 2x Febi Bolt, brake caliper (05153)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Tab Washer, axle nut (08952)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 18 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 180 mm |
| Outer diameter | 73 mm |
| Inner diameter | 31 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 90.5 mm |
| Gasket inner diameter | 84.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Width | 134 mm |
| Additional Information 2 | with oil sump gasket |
| Seal Material | Rubber |
| Function | Hydraulic Filter Kit, automatic transmission |
| Height | 36 mm |
| Length | 158 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (08716)
- 1x Febi Hydraulic Filter, automatic transmission (06445)
- 1x Febi Seal Ring, oil screen (06436)
- 2x Febi Seal Ring, oil screen (06435)
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1633 mm |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, steering idler arm |
| Type | Repair Kit, steering idler arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (01688)
- 1x Febi Screw (02347)
- 1x Febi Sealing Cover, steering arm shaft (02348)
- 1x Febi Washer (02349)
- 1x Febi Washer (02350)
- 2x Febi Bush, steering arm shaft (02351)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 109.6 mm |
| Width | 63.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.3 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Replaces | 16702 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1939 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 96 mm |
| Width | 51 mm |
| Material | Rubber/Metal |
| Thickness | 96 mm |
| Inner diameter | 18 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 353 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Outer diameter | 105 mm |
| Inner diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 185 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 220 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 80 mm |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Thread Length | 30 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Pressure Switch, air conditioning |
| External Thread Size | 3/8 " 24 UNF |
| Function | Pressure Switch, air conditioning |
| Spanner Size | 21 |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 87 mm |
| Width | 52.9 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Width | 178 mm |
| Filter type | Activated Carbon Filter |
| Length | 179 mm |
| Height | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, radiator |
| Function | Mounting, radiator |
| Thread Length | 17 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 8W0 513 353 B |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without bulb |
| Paired article numbers | 197662 |
| Type | Direction Indicator |
| Fulfils ECE norm | R6 |
| Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | without bulb |
| Paired article numbers | 197582 |
| Colour | Crystal clear |
| Type | Direction Indicator |
| Fulfils ECE norm | R6 |
| Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 71 mm |
| Outer diameter | 100 mm |
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 248 mm |
| Function | Hydraulic Filter, automatic transmission |
| Width | 200 mm |
| Height | 45 mm |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 164.8 mm |
| Width | 66.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.2 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 12371-28021 |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































