Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.29 kg |
| Stroke | 256 mm |
| Housing Diameter | 18 mm |
| Eject Force | 370 N |
| Function | Gas Spring, front panel |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 349 mm |
| Placement on Vehicle | Right Front |
| Length | 632 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 1102 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.102 kg |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Height | 221 mm |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter, with water separator |
| Function | Fuel filter |
| Internal Thread Size | 1" - 14 UNS |
| Type | Fuel filter |
| Weight | 1.060 kg |
| Additional Information 2 | with seal ring |
| Chemical Properties | Rape Seed oil resistant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Weight | 1.08 kg |
| Cone Size | 19.6 mm |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with washers, with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Width | 83 mm |
| Length | 131 mm |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Thickness | 126 mm |
| Weight | 1.193 kg |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.170 kg |
| Material | Thermoplast |
| Placement on Vehicle | Wheel Side, Front Axle Right |
| Length | 116 mm |
| Joint Type | CV Joint |
| Inner diameter 2 | 86 mm |
| Paired article numbers | 175143 |
| Inner diameter 1 | 38 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174812)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 46 |
| Function | Chain Kit, oil pump drive |
| Weight | 0.24 kg |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G52H |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33642)
- 1x Febi Chain Tensioner, oil pump drive (33688)
£18.75
Important compatibility info
| Function | V-Ribbed Belt |
| Additional Information 2 | Requires special tools for mounting |
| Length | 1180 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Weight | 0.105 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 597 mm |
| Housing Diameter | 19 mm |
| Eject Force | 515 N |
| Stroke | 204 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 356.5 mm |
| Weight | 0.361 kg |
| Type | Gas Spring, boot/cargo area |
| Replaces | 25313; 27887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | Gasket, timing case |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Weight | 0.016 kg |
| Type | Gasket, timing case |
| Thickness | 0.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | Corrugated Pipe, exhaust system |
| Inner diameter | 90 mm |
| Length | 1 m |
| Weight | 2.45 kg |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.280 kg |
| Housing length | 322.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18.5 mm. 18 mm |
| Stroke | 245 mm |
| Eject Force | 300 N |
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.9 kg |
| Placement on Vehicle | Rear Axle |
| Length | 104.6 mm |
| Width | 43.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Weight | 0.250 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 171561 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Weight | 0.24 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 171560 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Width | 37 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.57 kg |
| Outer diameter | 75 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Replaces | 04010 |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 185613 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.07 kg |
| Cable Length | 1225 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.03 kg |
| Cable Length | 39 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
| Additional Information 2 | with clip |
| Connector Shape | angled |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Weight | 1.075 kg |
| Placement on Vehicle | Rear Axle |
| Length | 94.69 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate, with fastening material |
| Type | Brake Pad Set, disc brake |
| Width | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Weight | 0.52 kg |
| Placement on Vehicle | Upper Left |
| Length | 685 mm |
| Housing Diameter | 22 mm |
| Eject Force | 400 N |
| Stroke | 300 mm |
| Mounting points diameter | 22 mm. 17.5 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, front panel |
| Housing length | 365 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.316 kg |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (106580)
- 2x Febi Rubber Buffer, suspension (37187)
£18.76
Important compatibility info
| Weight | 0.255 kg |
| Length | 125 mm |
| Width | 126 mm |
| Thickness | 124 mm |
| Function | Equalising reservoir, hydraulic oil (power steering) |
| Extra Description | febi Plus |
| Type | Equalising reservoir, hydraulic oil (power steering) |
| Additional Information 2 | with cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.300 kg |
| Function | Ball Joint |
| Mounting points diameter | 12.2 mm |
| Cone Size | 22 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Weight | 0.622 kg |
| Type | Ball Joint |
| Function | Ball Joint |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Weight | 0.02 kg |
| Length | 40 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from expansion tank to distributor and cylinder head |
| Function | Radiator Hose |
| Weight | 0.139 kg |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| Hose Length | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 130 mm |
| Additional Information | with lock nut |
| Spanner Size | 22 |
| Paired article numbers | 188518 |
| Weight | 0.433 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 289 mm |
| Diameter | 26 mm |
| Material | Steel |
| Thickness | 10 mm |
| Spanner Size | 5 |
| Rod/Strut | Coupling Rod |
| Thread Length | 38.5 mm |
| Weight | 0.260 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 130 mm |
| Additional Information | with lock nut |
| Spanner Size | 22 |
| Paired article numbers | 188517 |
| Weight | 0.433 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Width | 63.2 mm |
| Length | 126 mm |
| Thickness/Strength 1 | 14.8 mm |
| Weight | 1.161 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Lower Front Axle, Rear Axle Lower |
| Thickness | 109 mm |
| Type | Mounting, shock absorber |
| Inner diameter | 22 mm |
| Function | Mounting, shock absorber |
| Weight | 0.530 kg |
| Outer diameter | 49.5 mm |
| External Thread Size | M16 x 2 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Additional Information 2 | with nut |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 0.474 kg |
| Spanner Size | 17 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
| Weight | 0.375 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5 |
| Weight | 0.358 kg |
| Placement on Vehicle | Rear Axle Left |
| Length | 313 mm |
| Material | Steel |
| Inner diameter | 8 mm |
| Paired article numbers | 29697 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Weight | 0.5 kg |
| Cone Size | 18 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Lock System | with lock, with two keys |
| Weight | 0.120 kg |
| Outer diameter | 66 mm |
| Function | Sealing Cap, tank unit (Urea injection) |
| Thickness | 50 mm |
| Colour | Blue |
| Type | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Placement on Vehicle | Rear Axle, inner |
| Material | Rubber/Metal |
| Outer diameter | 85 mm |
| Thickness | 72 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Weight | 0.638 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.77
Important compatibility info
| Weight | 0.37 kg |
| Additional Information 2 | with ball bearing |
| Placement on Vehicle | Centre |
| Width | 13 mm |
| Outer diameter | 55 mm |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.78
Important compatibility info
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Weight | 0.400 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.78
Important compatibility info
| Weight | 1.222 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 34 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.78
Important compatibility info
| Internal Thread Size | M36 x 3 |
| Outer diameter | 45 mm |
| Thickness | 80 mm |
| Function | Bush, spring eye |
| Type | Bush, spring eye |
| Weight | 0.211 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.79
Important compatibility info
| Additional Information 2 | with cover |
| Type | Wiper Arm, window cleaning |
| Weight | 0.155 kg |
| Colour | Black |
| Extra Description | febi Plus |
| Function | Wiper Arm, window cleaning |
| Placement on Vehicle | Rear |
| Material | PBT |
| Length | 335 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.79
Important compatibility info
| Weight | 0.325 kg |
| DIN / ISO | 7638-1 EBS |
| Additional Information 2 | with screw connection |
| Function | Plug |
| Type | Plug |
| Voltage | 24 V |
| Number of Connectors / Ports | 7 |
| Version | Aftermarket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.79
Important compatibility info
| Weight | 1.98 kg |
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Length | 155 mm. 156.4 mm |
| Width | 66.6 mm. 72.1 mm |
| Brake System | ATE |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.79
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 2025 mm |
| Paired article numbers | 34395 |
| Weight | 0.655 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.79
Important compatibility info
| Weight | 0.422 kg |
| Height | 153 mm |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 103 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.79
Important compatibility info
| Weight | 0.492 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Inner diameter | 60 mm |
| Paired article numbers | 21461 |
| Colour | Black |
| Function | Holder, control arm mounting |
| Type | Holder, control arm mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.80
Important compatibility info
| Weight | 0.52 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Outer diameter | 109 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.80
Important compatibility info
| Weight | 0.187 kg |
| Length | 1830 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.80
Important compatibility info
| Valve stem diameter | 5.5 mm |
| Valve head diameter | 24 mm |
| Paired article numbers | 176538 |
| Weight | 0.03 kg |
| Length | 102 mm |
| Notches / Holes Number | 3 |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023