Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 22 |
Function | Joint Kit, drive shaft |
Weight | 1.696 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.768 kg |
Width | 40 mm |
Outer diameter | 74 mm |
Inner diameter | 40 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, ball joint (21884)
- 1x Febi Nut (14392)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Nut (11435)
Important compatibility info
Function | Washer Fluid Jet, headlight cleaning |
Extra Description | febi Plus |
Paired article numbers | 173711 |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.135 kg |
Placement on Vehicle | Right |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.400 kg |
Placement on Vehicle | Rear Axle Lower |
Length | 86 mm |
Material | Rubber/Metal |
Outer diameter | 57 mm |
Inner diameter | 19 mm |
Steering arm type | for trailing arm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Switch, reverse light |
Function | Switch, reverse light |
Transmission Type | Manual Transmission |
Number of Connectors / Ports | 3 |
Weight | 0.02 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Material | Rubber/Metal, Aluminium |
Outer diameter | 85 mm |
Thickness | 77 mm |
Inner diameter | 17 mm |
Paired article numbers | 26508 |
Function | Bushing, axle beam |
Weight | 0.500 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Function | Thermostat, oil cooling |
Opening Temperature | 80 °C |
Type | Thermostat, oil cooling |
Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.216 kg |
Inner diameter 1 | 31 mm |
Inner diameter 2 | 101 mm |
Material | Thermoplast |
Length | 136 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175669)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Thickness | 86 mm. 80 mm |
Outer diameter | 78 mm |
Weight | 0.410 kg |
Inner diameter | 16 mm |
Paired article numbers | 26507 |
Function | Bushing, axle beam |
Material | Rubber/Metal, Aluminium |
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Weight | 0.090 kg |
Type | Gasket, cylinder head cover |
for OE number | 22441-2B000 |
Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.548 kg |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Length | 202 mm |
Thickness | 34 mm |
Spanner Size | 17 |
Paired article numbers | 48060 |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 48059 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Right |
Length | 202 mm |
Thickness | 34.1 mm |
Spanner Size | 17 |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Weight | 0.536 kg |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 95.8 mm |
Width | 43.9 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 13.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 0.69 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Weight | 0.492 kg |
Inner diameter | 60 mm |
Paired article numbers | 21462 |
Colour | Black |
Placement on Vehicle | Front Axle Left, Lower |
Function | Holder, control arm mounting |
Type | Holder, control arm mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.235 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23588)
- 2x Febi Protective Cap/Bellow, shock absorber (19286)
Important compatibility info
Weight | 0.380 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 60 01 548 160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right, inner |
Outer diameter | 64.8 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.221 kg |
Inner diameter | 14.1 mm |
Thickness | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 116.2 mm |
Width | 50.9 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 1.140 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with piston clip |
Placement on Vehicle | Front Axle |
Length | 155.1 mm |
Width | 49 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 1.359 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.23 kg |
Placement on Vehicle | Front Axle Right |
Length | 105 mm |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 42391 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023