Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 88 °C |
| Additional Information 2 | with seal ring |
| Outer diameter | 54 mm |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 23129 |
| Width | 70 mm |
| Outer diameter | 49 mm. 59 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Internal Thread Size | M12 x 1,75 |
| Additional Information 2 | with fastening material |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (27913)
- 2x Febi Fastening Bolt, control arm (32417)
Important compatibility info
| Inner diameter | 153 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 205 mm |
| Thickness | 11 mm |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 109 mm |
| Inner diameter | 81 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Rear Axle |
| Length | 67 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Placement on Vehicle | Right, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 116 mm |
| Outer diameter | 90 mm |
| Additional Information 2 | with seal ring |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 77.5 mm |
| Outer diameter | 80 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 32 |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Additional Information | with fastening/mounting material |
| Outer diameter | 55 mm |
| Inner diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173387)
- 1x Febi Axle Nut, drive shaft (173828)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 61.6 mm |
| Width | 70 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.4 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 170895 |
| Cable Length | 1072 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 106468 |
| Number of Connectors / Ports | 2 |
| Cable Length | 967 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180425 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Spanner Size | 12 |
| Length | 223 mm |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | for control arm |
| Additional Information 2 | with screw |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186194)
- 2x Febi Protective Cap/Bellow, shock absorber (192650)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 75 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with axle nut |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (22953)
Important compatibility info
| Additional Information 2 | without seal ring |
| Outer diameter | 60 mm |
| Function | Thermostat, coolant |
| Opening Temperature | 82 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Thread Length | 13 mm |
| Eject Force | 170 N |
| Function | Gas Spring, boot/cargo area |
| Length | 392 mm. 234 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















