Important compatibility info
| Function | Repair Kit, pressure relief valve (air compressor) |
| Type | Repair Kit, pressure relief valve (air compressor) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 117 mm |
| Material | Thermoplast |
| Paired article numbers | 171858 |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 84 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173442)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1705 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 77.5 mm |
| Outer diameter | 80 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 32 |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 257 mm |
| Additional Information | with lock nut |
| Spanner Size | 22 |
| Paired article numbers | 196634 |
| Cone Size | 14.7 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size 2 | 16 mm |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 225 mm |
| Paired article numbers | 21493 |
| Quality/ Grade | 10 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, support frame/subframe |
| Placement on Vehicle | both sides, Centre, Lower |
| Length | 57 mm |
| Outer diameter | 72.5 mm |
| Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 249 mm |
| Outer diameter | 88 mm |
| Inner diameter | 46 mm. 18 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | transmission sided, Rear Axle Left, Rear Axle Right |
| Length | 91 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180901)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 9 |
| Length | 1424 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with quick coupling |
| Hose Length | 800 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from expansion tank to distributor and cylinder head |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, clutch release bearing |
| Type | Repair Kit, clutch release bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Outer diameter | 297 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 124 410 07 81 |
| Material | Rubber/Metal |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 75 mm |
| Inner diameter | 18 mm. 12 mm |
| Paired article numbers | 21464 |
| Length | 144 mm |
| Placement on Vehicle | Lower Front Axle, Left |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21461)
- 1x Febi Mounting, control/trailing arm (07264)
Important compatibility info
| Outer diameter | 75 mm |
| Inner diameter | 18 mm. 12 mm |
| Paired article numbers | 21463 |
| Length | 144 mm |
| Placement on Vehicle | Lower Front Axle, Right |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21462)
- 1x Febi Mounting, control/trailing arm (07264)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 95.8 mm |
| Width | 43.9 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















