Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Filter type | without water sensor, In-Line Filter, with water drain screw |
| Outer diameter | 90 mm |
| Height | 158 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 51 mm |
| Outer diameter | 31 mm |
| Inner diameter | 16 mm |
| Type | Centering Sleeve, propshaft |
| Function | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Wheel Bearing Kit |
| Inner diameter | 21 mm. 35 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter | 50 mm. 65 mm |
| Width | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174060)
- 1x Febi Wheel Bearing (174059)
- 1x Febi Split Pin (173993)
- 1x Febi Shaft Seal (174062)
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 38 mm |
| Outer diameter | 79 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
| Inner diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Width | 37 mm |
| Inner diameter | 40 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Additional Information 2 | with retaining ring |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 75 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Length | 748 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Mounting, engine |
| for OE number | 2 214 445 |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
| Length | 994 mm |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1004 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 180 mm |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Right, inner |
| Paired article numbers | 185682 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Length | 1139 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 193076 |
| Colour | Black |
| Type | Door Check |
| Function | Door Check |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Right Front |
| Material | Plastic |
| Paired article numbers | 193068 |
| Colour | Black |
| Type | Door Check |
| Function | Door Check |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Upper Left |
| Length | 785 mm |
| Housing Diameter | 22 mm |
| Eject Force | 250 N |
| Stroke | 350 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
| Housing length | 415 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 249 mm |
| Paired article numbers | 29610 |
| Rod/Strut | Suspension Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 249 mm |
| Paired article numbers | 29611 |
| Rod/Strut | Suspension Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 44 mm |
| Outer diameter | 82 mm |
| Width | 37 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
| Type | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Material | Metal |
| Outer diameter | 61 mm |
| Inner diameter | 8 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M16 x 1,5 |
| Function | Ball Joint |
| Cone Size | 16.3 mm |
| Mounting points diameter | 13.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 364.5 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 303 mm |
| Eject Force | 230 N |
| Housing Diameter | 18 mm |
| Length | 685 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023