Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 24 V |
| Frequency Range | 500 Hz |
| Signal | High Tone |
| Noise Level | 109 dB |
| Length | 97 mm |
| Height | 89 mm |
| Width | 107 mm |
| Weight | 0.320 kg |
| Type | Signal Horn |
| Function | Signal Horn |
| Operating Mode | Electric |
| Power Consumption | 100 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 169 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 17 |
| Paired article numbers | 195003 |
| Weight | 0.494 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.59
Important compatibility info
| Weight | 0.842 kg |
| Material | Cast Aluminium |
| Number of Teeth | 20 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.59
Important compatibility info
| Weight | 0.138 kg |
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 130 mm |
| Thickness | 26.5 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.59
Important compatibility info
| Weight | 0.75 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.59
Important compatibility info
| Weight | 1.22 kg |
| Placement on Vehicle | Front Axle |
| Length | 125.5 mm |
| Width | 51.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.60
Important compatibility info
| Operating Pressure | 8 bar |
| Type | Quick Release Valve |
| Function | Quick Release Valve |
| Bore Diameter | 8 mm |
| Mounting bores distance | 44 mm |
| Internal Thread Size | M22 x 1,5 |
| Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.60
Important compatibility info
| Weight | 0.603 kg |
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.60
Important compatibility info
| Weight | 0.147 kg |
| Width | 30 mm |
| Material | Metal |
| Outer diameter | 28 mm |
| Engine Management | Timing Belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Weight | 0.276 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| Weight | 0.193 kg |
| Number of Ribs | 7 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1660 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| Inner diameter | 14.3 mm |
| Paired article numbers | 175470 |
| Weight | 0.604 kg |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Thickness | 58 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Rear |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Weight | 0.604 kg |
| Paired article numbers | 175469 |
| Inner diameter | 14.3 mm |
| Material | Rubber/Metal |
| Thickness | 58 mm |
| Placement on Vehicle | Front Axle Right, Rear |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| for OE number | 54626-2B000 S1 |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.302 kg |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.181 kg |
| Inner diameter 2 | 78 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Length | 103 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175533)
- 1x Febi Molybdenum Grease (02582)
£19.62
Important compatibility info
| Model | i10 i20 |
| Weight | 1.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 116.2 mm |
| Width | 47.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Manufacturer | HYUNDAI |
| Replaces | 170240 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.62
Important compatibility info
| Width | 20 mm |
| Number of Teeth | 130 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
| Weight | 0.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.62
Important compatibility info
| Weight | 0.02 kg |
| Material | FKM (fluorocarbon rubber), NBR (nitrile butadiene rubber) |
| Type | Repair Kit, shift cylinder |
| Function | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.62
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Housing length | 216.5 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Eject Force | 580 N |
| Stroke | 107 mm |
| Housing Diameter | 19 mm |
| Weight | 0.3 kg |
| Length | 516 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.62
Important compatibility info
| Weight | 1.560 kg |
| Placement on Vehicle | Front Axle |
| Length | 127.8 mm |
| Width | 56.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Replaces | 16329 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.760 kg |
| Function | Mounting, manual transmission |
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Height | 300 mm |
| Type | Mudflap |
| Function | Mudflap |
| Weight | 1.2 kg |
| Width | 450 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Weight | 2.088 kg |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Length | 164.4 mm |
| Width | 58.2 mm |
| Thickness/Strength 1 | 16.6 mm |
| Replaces | 116085 |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Weight | 1.131 kg |
| Height | 300 mm |
| Width | 500 mm |
| Type | Mudflap |
| Function | Mudflap |
| Additional Information | with fastening/mounting material |
| Replaces | 03139 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Weight | 0.892 kg |
| Placement on Vehicle | Rear Axle |
| Length | 121 mm |
| Width | 42.7 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 391 mm |
| Spanner Size | 38, 15 |
| Weight | 0.873 kg |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Outer diameter | 40 mm |
| Additional Information | with counter nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 180 mm |
| Thickness | 108 mm |
| Spanner Size | 24 |
| Paired article numbers | 44246 |
| Function | Tie Rod End |
| Weight | 0.769 kg |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Type | Tie Rod End |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| Length | 156 mm |
| Spanner Size | 25 |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M18 x 1,5 |
| Weight | 0.874 kg |
| Paired article numbers | 180388 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| Weight | 0.769 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 180 mm |
| Thickness | 108 mm |
| Spanner Size | 24 |
| Paired article numbers | 44245 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M15 x 1,5 |
| Weight | 0.5 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 144 mm |
| Thickness | 73 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.64
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023