Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.760 kg |
| Function | Mounting, manual transmission |
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.635 kg |
| Width | 170 mm |
| Material | Aluminium |
| Outer diameter | 79 mm |
| Thickness | 50 mm |
| Paired article numbers | 27069 |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 101 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 24 mm |
| Weight | 0.163 kg |
| Inner diameter 2 | 72 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180143)
- 1x Febi Molybdenum Grease (02582)
£19.74
Important compatibility info
| Weight | 1.41 kg |
| Material | Rubber |
| Function | Seal, windscreen |
| Type | Seal, windscreen |
| Glass | with trim strip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 3.8 kg |
| Inner diameter | 140 mm |
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Brake Shoe Pin Set |
| Weight | 0.405 kg |
| Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Bolt (05738)
- 2x Febi Washer (05776)
- 2x Febi Circlip, brake anchor pin (04767)
£19.74
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.177 kg |
| Inner diameter 2 | 84 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175500)
- 1x Febi Molybdenum Grease (02582)
£19.74
Important compatibility info
| Function | Tie Rod End |
| Paired article numbers | 102849 |
| Length | 94 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod End |
| Weight | 0.447 kg |
| Additional Information 2 | with nut |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (102846)
- 1x Febi Nut (45868)
£19.74
Important compatibility info
| Weight | 0.64 kg |
| Placement on Vehicle | Upper Left |
| Length | 785 mm |
| Housing Diameter | 22 mm |
| Eject Force | 250 N |
| Stroke | 350 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
| Housing length | 415 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1119 mm |
| Number of Ribs | 7 |
| Weight | 0.120 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 364.5 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 303 mm |
| Eject Force | 230 N |
| Housing Diameter | 18 mm |
| Length | 685 mm |
| Placement on Vehicle | both sides |
| Weight | 0.394 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.178 kg |
| Outer diameter | 66 mm |
| Thickness | 101 mm |
| Inner diameter | 15 mm |
| Function | Urea Filter |
| Internal Thread Size | M15 x 3 |
| Type | Urea Filter |
| Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Height | 59 mm |
| Outer diameter | 91.6 mm |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Manufacturer's restriction oil filter housing | Mahle |
| Bolt Head/Nut Design | Male Hex |
| Spanner Size | 32 |
| Extra Description | febi Plus |
| Weight | 0.095 kg |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 596 mm |
| Housing Diameter | 19 mm |
| Eject Force | 420 N |
| Stroke | 187 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 354 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.478 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.32 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Length | 108 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30084)
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (27214)
- 1x Febi Molybdenum Grease (02582)
£19.74
Important compatibility info
| Type | Fuel filter |
| Gasket inner diameter | 92 mm |
| Filter type | Spin-on Filter |
| Outer diameter | 111 mm |
| Gasket outer diameter | 102 mm |
| Function | Fuel filter |
| Internal Thread Size | 1" - 14 UNF |
| Weight | 1.184 kg |
| Height | 236 mm |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Outer diameter | 96 mm |
| Thickness | 98 mm |
| Inner diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Material | Rubber |
| Weight | 0.512 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.85 kg |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 26 mm |
| Outer diameter | 452 mm |
| Inner diameter | 267 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1705 mm |
| Weight | 0.398 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Outer diameter | 140 mm |
| Inner diameter | 89 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Weight | 0.382 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 34 mm |
| Material | Plastic |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 221 mm |
| Thickness | 87 mm |
| Spanner Size | 24 |
| Paired article numbers | 43149 |
| Function | Tie Rod End |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M20 x 1,5 |
| Weight | 1.02 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Weight | 0.78 kg |
| Placement on Vehicle | Rear Axle |
| Length | 88.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Width | 47.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Weight | 0.87 kg |
| Placement on Vehicle | Rear Axle |
| Length | 96.7 mm |
| Width | 49.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.75
Important compatibility info
| Housing Diameter | 19 mm |
| Eject Force | 490 N |
| Stroke | 235 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.375 kg |
| Housing length | 341.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
| Length | 633 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.76
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Cable Length | 211 mm |
| Additional Information 2 | with screw |
| Length | 275 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor, wheel speed |
| Weight | 0.028 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.76
Important compatibility info
| Weight | 1.262 kg |
| Placement on Vehicle | Rear Axle |
| Length | 112 mm |
| Width | 73 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.76
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 292 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M15 x 1,5, M14 x 1,5 |
| Weight | 0.718 kg |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.76
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Right, Upper, Front |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 36401 |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.94 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.76
Important compatibility info
| Weight | 0.24 kg |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 89 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 76.7 mm |
| Outer diameter | 139 mm. 43 mm |
| Additional Information 2 | without wheel bearing, with wheel studs |
| Bolt Hole Circle Diameter | 114 mm |
| Weight | 2.04 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.77
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 242 mm |
| Internal Thread Size | M10 x 1 |
| Function | Brake Hose |
| Spanner Size | 11 |
| Paired article numbers | 170866 |
| External Thread Size | M10 x 1 |
| Weight | 0.180 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.78
Important compatibility info
| Weight | 0.06 kg |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| External Thread Size | M18 x 1,5 |
| Type | Switch, reverse light |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.78
Important compatibility info
| Weight | 0.059 kg |
| Height | 110 mm |
| Width | 170 mm |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 16.3 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| for OE number | 06F 103 235 A |
| Additional Information 2 | with quick couplers |
| Hose Length | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.78
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.38 kg |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| for OE number | 7 350 847 S1 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09473)
- 1x Febi Rolling Bearing, suspension strut support mount (12469)
£19.79
Important compatibility info
| Weight | 0.38 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| External Thread Size | M8 x 1,5 |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19675)
- 1x Febi Rolling Bearing, suspension strut support mount (12471)
£19.79
Important compatibility info
| Weight | 0.433 kg |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Weight | 0.170 kg |
| Inner diameter 2 | 61 mm |
| Inner diameter 1 | 22 mm |
| Material | Thermoplast |
| Length | 103 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175234)
- 1x Febi Molybdenum Grease (02582)
£19.80
Important compatibility info
| Weight | 0.95 kg |
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 267 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 139.1 mm. 141.1 mm |
| Width | 55.2 mm. 59.3 mm |
| Additional Information 2 | with piston clip, with staples |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Weight | 1.270 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Weight | 0.046 kg |
| Length | 745 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Weight | 0.088 kg |
| Height | 80 mm |
| Outer diameter | 74.4 mm |
| Spanner Size | 27 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 131.4 mm |
| Width | 57.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 1.57 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.80
Important compatibility info
| Width | 114 mm |
| Weight | 0.216 kg |
| Type | Holder, air conditioning compressor |
| Function | Holder, air conditioning compressor |
| Extra Description | febi Plus |
| Length | 250 mm |
| Height | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.81
Important compatibility info
| Timing Chain Size | G68VCO, G68V-1 |
| Number of Chain Links | 70 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.306 kg |
| Function | Chain, intermediate shaft |
| Type | Chain, intermediate shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.81
Important compatibility info
| Weight | 0.320 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Length | 1920 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.294 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.797 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.82
Important compatibility info
| Placement on Vehicle | Lower, Front, Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Weight | 0.626 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
Important compatibility info
| Weight | 0.970 kg |
| Placement on Vehicle | Front Axle |
| External Thread Size | M12 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (04452)
- 1x Febi Inner Tie Rod (02240)
£19.83
Important compatibility info
| Length | 320 mm |
| Material | Metal |
| Outer diameter | 132 mm |
| Inner diameter | 128 mm |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
| Weight | 1.138 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023