Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Length | 180 mm |
External Thread Size | M10 x 1 |
Placement on Vehicle | Rear Axle Right, inner |
Paired article numbers | 185682 |
Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.41 kg |
Material | Rubber |
Function | Seal, windscreen |
Type | Seal, windscreen |
Glass | with trim strip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.64 kg |
Placement on Vehicle | Upper Left |
Length | 785 mm |
Housing Diameter | 22 mm |
Eject Force | 250 N |
Stroke | 350 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, front panel |
Function | Gas Spring, front panel |
Housing length | 415 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Cooling Hose | from heat exchanger to engine |
Function | Radiator Hose |
Weight | 0.251 kg |
Type | Radiator Hose |
Additional Information | with quick coupling |
Hose Length | 585 mm |
Additional Information 2 | with clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 101 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 24 mm |
Weight | 0.163 kg |
Inner diameter 2 | 72 mm |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180143)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | both sides |
Length | 596 mm |
Housing Diameter | 19 mm |
Eject Force | 420 N |
Stroke | 187 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 354 mm |
Type | Gas Spring, boot/cargo area |
Weight | 0.478 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | both sides |
Length | 640 mm |
Housing Diameter | 19 mm |
Eject Force | 465 N |
Stroke | 248 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 363.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Material | Plastic |
Paired article numbers | 193068 |
Colour | Black |
Weight | 0.19 kg |
Type | Door Check |
Function | Door Check |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.272 kg |
Length | 2000 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 170 mm |
Material | Aluminium, Rubber/Metal |
Outer diameter | 79 mm |
Thickness | 51 mm |
Paired article numbers | 27071 |
Weight | 0.640 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Inner diameter | 19 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Right |
Weight | 0.366 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Paired article numbers | 102849 |
Length | 94 mm |
Placement on Vehicle | Front Axle Left |
Type | Tie Rod End |
Weight | 0.447 kg |
Additional Information 2 | with nut |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (102846)
- 1x Febi Nut (45868)
Important compatibility info
Weight | 0.635 kg |
Width | 170 mm |
Material | Aluminium |
Outer diameter | 79 mm |
Thickness | 50 mm |
Paired article numbers | 27069 |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 18 mm |
Housing length | 364.5 mm |
Function | Gas Spring, bonnet |
Piston conrod diameter | 8 mm |
Stroke | 303 mm |
Eject Force | 230 N |
Housing Diameter | 18 mm |
Length | 685 mm |
Placement on Vehicle | both sides |
Weight | 0.394 kg |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
for OE number | 2 214 445 |
Placement on Vehicle | Rear |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.460 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pump Type | Mono Pump |
Weight | 0.098 kg |
Number of Connectors / Ports | 3 |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1502 mm |
Number of Ribs | 6 |
Weight | 0.144 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.760 kg |
Function | Mounting, manual transmission |
Placement on Vehicle | Lower, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.278 kg |
Mounting points diameter | 10 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width | 45 mm |
Material | Metal |
Outer diameter | 65 mm |
Width of castor bearing surface | 30.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.921 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (07359)
- 1x Febi Spacer Sleeve, suspension strut support mount (08431)
- 1x Febi Rubber Buffer, suspension (08384)
- 1x Febi Protective Cap/Bellow, shock absorber (02557)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023