Proud to be a UK-based company
Contact us
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Plastic |
| Placement on Vehicle | Front Axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (45353)
- 4x Febi Screw (36639)
- 4x Febi Nut (36641)
£23.82
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 425 mm |
| Spanner Size | 15 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.54
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Number of Connectors / Ports | 6 |
| Type | Mass Air Flow Sensor |
| for OE number | 82 00 280 060 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.16
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 50 mm |
| Width | 25 mm |
| Material | Plastic |
| Inner diameter | 10 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.94
Important compatibility info
| Function | Gasket, oil sump |
| Thickness | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Width | 14 mm |
| Length | 1020 mm |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.19
Important compatibility info
| Length | 103 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
| Hole Spacing | 40 mm. 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.30
Important compatibility info
| Cone Size | 28.8 mm |
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 2140 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£183.55
Important compatibility info
| Hose Length | 610 mm |
| Function | Radiator Hose |
| Cooling Hose | from expansion tank to water pipe |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Placement on Vehicle | Lower Right |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Right |
| Hose Length | 325 mm |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Hose Length | 255 mm |
| Function | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Placement on Vehicle | Upper |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.67
Important compatibility info
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Hose Length | 215 mm |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.23
Important compatibility info
| Outer diameter 1 | 17 mm |
| Outer diameter 2 | 49 mm |
| Placement on Vehicle | Rear Axle |
| Length | 143 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1325 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Function | Sensor, wheel speed |
| Cable Length | 1240 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.56
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 8 |
| Length | 1495 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.33
Important compatibility info
| Number of Ribs | 5 |
| Function | V-Ribbed Belt |
| Length | 1525 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.10
Important compatibility info
| Length | 1407 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 4 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.53
Important compatibility info
| Length | 1515 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.24
Important compatibility info
| Length | 2990 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Length | 1468 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.26
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1655 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from engine to water pump |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| Hose Length | 485 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.78
Important compatibility info
| Hose Length | 470 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from engine to heater valve |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.15
Important compatibility info
| Hose Length | 265 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.02
Important compatibility info
| Additional Information | with quick coupling |
| Hose Length | 800 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from expansion tank to distributor and cylinder head |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 48 mm |
| Width | 52 mm |
| Outer diameter | 50 mm |
| Thickness | 55 mm |
| Inner diameter | 11 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.01
Important compatibility info
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Length | 278 mm |
| Height | 30 mm |
| Width | 232 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.86
Important compatibility info
| Function | Mounting Kit, stabiliser bar |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 11 mm |
| Additional Information | with holder |
| Additional Information 2 | with bolts/screws |
| Type | Mounting Kit, stabiliser bar |
| Hole Spacing | 84 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (45856)
- 2x Febi Bracket, stabiliser mounting (40445)
- 4x Febi Screw, pressure plate (29278)
£55.55
Important compatibility info
| Outer diameter | 106 mm |
| Height | 132 mm |
| Filter type | In-Line Filter, with filter heating |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Function | Fuel filter |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.75
Important compatibility info
| Length | 503 mm |
| Height | 50 mm |
| Width | 229 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.50
Important compatibility info
| Material | Plastic |
| Outer diameter | 95 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Filter type | Filter Insert |
| Height | 201 mm |
| Length | 142 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.61
Important compatibility info
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Width | 90 mm |
| Length | 163 mm |
| Height | 32 mm |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.81
Important compatibility info
| Length | 2475 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Placement on Vehicle | Upper, Rear Axle |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Material | Aluminium |
| Inner diameter | 10 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle, non-steered trailing axle |
| Outer diameter | 131 mm. 190 mm |
| Thickness | 395 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.39
Important compatibility info
| Function | Actuator, headlight levelling |
| Placement on Vehicle | both sides |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Extra Description | febi Plus |
| Type | Actuator, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.35
Important compatibility info
| Function | Coolant Flange |
| Placement on Vehicle | Cylinder Head |
| Colour | Black |
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.27
Important compatibility info
| Paired article numbers | 45892 |
| Thickness | 52 mm |
| Inner diameter | 19 mm |
| Function | Mounting, control/trailing arm |
| Width | 52 mm |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Extra Description | ProKit |
| Type | Mounting, control/trailing arm |
| Additional Information 2 | with fastening material |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38662)
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
£21.40
Important compatibility info
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 155 mm. 280 mm |
| Thickness | 155 mm. 605 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.00
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12.5 mm |
| Mounting points diameter | 12 mm |
| Min. Length | 185 mm |
| Pipe Diameter | 38.5 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 252 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.14
Important compatibility info
| Function | Bushing, leaf spring |
| Outer diameter 2 | 52 mm |
| Length | 158 mm |
| Outer diameter 1 | 19 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.81
Important compatibility info
| Inner diameter | 19 mm |
| Function | Bushing, leaf spring |
| Thickness | 52 mm |
| Material | Rubber/Metal |
| Outer diameter | 52 mm |
| Width | 52 mm |
| Length | 97 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.25
Important compatibility info
| Function | Seal Kit, multi-valve |
| Additional Information | with gaskets/seals |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.40
Important compatibility info
| Length | 855 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.62
Important compatibility info
| Additional Information 2 | with spring cotter |
| Thickness | 124 mm. 519 mm |
| Outer diameter | 258 mm. 229 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Front Axle |
| Type | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.79
Important compatibility info
| Material | Metal |
| Thickness | 0.7 mm |
| Function | Gasket, cylinder head |
| Length | 1013 mm |
| Width | 286 mm |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£269.76
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Brake Hose |
| Length | 476 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.85
Important compatibility info
| Material | Plastic |
| for OE number | 3979593 |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023