Important compatibility info
Weight | 0.101 kg |
Material | Plastic |
Function | Housing Cover, crankcase |
Extra Description | febi Plus |
Type | Housing Cover, crankcase |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.597 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 256 mm |
Function | Inner Tie Rod |
External Thread Size | M16 x 1, M14 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, transmission sided |
Weight | 0.400 kg |
Length | 127 mm |
Material | Thermoplast |
Inner diameter 1 | 30 mm |
Inner diameter 2 | 74 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100191)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Axle Bolt, drive shaft (40617)
Important compatibility info
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.59 kg |
Placement on Vehicle | Rear Axle |
Type | Suspension Strut Support Mount |
Length | 130 mm |
Height | 47 mm |
Width | 120 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 500 mm |
Piston conrod diameter | 8 mm |
Housing length | 269.5 mm |
Mounting points diameter | 16.5 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 435 N |
Stroke | 192 mm |
Placement on Vehicle | both sides |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 500 N |
Housing length | 312 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.28 kg |
Housing Diameter | 18 mm |
Length | 585 mm |
Placement on Vehicle | both sides |
Stroke | 246 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Cable Length | 1005 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 174 mm |
Width | 158 mm |
Material | Rubber/Metal |
Outer diameter | 66 mm. 109 mm |
Inner diameter | 14 mm |
Weight | 1.1 kg |
Paired article numbers | 18734 |
Placement on Vehicle | Front Axle Left |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Internal Thread Size | M8 x 1,25 |
Height | 52 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.140 kg |
Outer diameter | 64.5 mm |
Thickness | 17.5 mm |
Inner diameter | 10 mm |
Placement on Vehicle | Rear Axle, Front |
Material | Rubber/Metal |
Function | Mounting, differential |
Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Front, Rear |
Paired article numbers | 175482 |
Weight | 0.10 kg |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Extra Description | febi Plus |
Surface | Chromed |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.240 kg |
Length | 1400 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Outer diameter | 160 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 3.3 mm |
Function | Brake Shoe Set, parking brake |
Additional Information | with spring |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Set, parking brake (10799)
- 2x Febi Spring, brake shoes (10798)
Important compatibility info
Height | 103 mm |
Outer diameter | 95 mm |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Function | Cap, oil filter housing |
Weight | 0.133 kg |
Extra Description | febi Plus |
Additional Information 2 | with seal ring |
Type | Cap, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Surface | Zinc-coated |
Spanner Size | 17, 19 |
Outer diameter | 25mm |
Important compatibility info
Additional Information | with quick coupling |
Weight | 0.170 kg |
Hose Length | 800 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Cooling Hose | from expansion tank to distributor and cylinder head |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.111 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 60 |
Timing Chain Size | G44HCF |
Function | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.017 kg |
Length | 23.9 mm |
Number of Connectors / Ports | 3 |
Type | Sensor, camshaft position |
Function | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.134 kg |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Function | Washer Fluid Pump, headlight cleaning |
Additional Information 2 | with seal ring |
Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.83 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing, with fastening material |
for OE number | 03 44 519 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08176)
- 1x Febi Rolling Bearing, suspension strut support mount (17180)
- 1x Febi Rubber Buffer, suspension (03098)
Important compatibility info
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Length | 91.6 mm |
Width | 80 mm |
Thickness/Strength 1 | 17.7 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with staples |
Weight | 1.66 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023