Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Weight | 1.45 kg |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.145 kg |
| Material | Aluminium |
| Piston Diameter | 25.4 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.112 kg |
| Type | Sensor, engine speed |
| Function | Sensor, engine speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Repair Kit, pressure relief valve (air compressor) |
| Weight | 0.133 kg |
| Type | Repair Kit, pressure relief valve (air compressor) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 03K 906 051 |
| Weight | 0.027 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
| Weight | 0.025 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 327.5 mm |
| Weight | 0.335 kg |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 670 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.204 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (23410)
£20.20
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 30 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 117 mm |
| Inner diameter 2 | 82 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172855)
- 1x Febi Molybdenum Grease (02582)
£20.20
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Weight | 0.068 kg |
| Outer diameter | 12 mm |
| Thickness | 34.7 mm |
| Operating Mode | Hydraulic |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Weight | 0.35 kg |
| Type | Mounting, support frame/subframe |
| Placement on Vehicle | both sides, Centre, Lower |
| Length | 57 mm |
| Outer diameter | 72.5 mm |
| Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Internal Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 169 mm |
| Additional Information | with counter nut |
| Spanner Size | 25 |
| Paired article numbers | 180829 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 0.92 kg |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Number of Ribs | 6 |
| Length | 1231 mm |
| Weight | 0.107 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.25 kg |
| Height | 249 mm |
| Outer diameter | 88 mm |
| Inner diameter | 46 mm. 18 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Material | ACM (Polyacrylate) |
| for OE number | 654 016 22 00 |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Weight | 0.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Diameter | 1 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Length | 284 mm |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Weight | 0.654 kg |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 184019 |
| Spanner Size | 19 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Material | Rubber/Metal |
| Width | 52 mm |
| Length | 50 mm |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Inner diameter | 10 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.3 kg |
| Outer diameter | 47 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Weight | 0.203 kg |
| Paired article numbers | 175476 |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.06 kg |
| Air Supply Hoses/Pipes | from valve (crankcase ventilation) to oil filter |
| Function | Hose, cylinder head cover ventilation |
| Extra Description | febi Plus |
| for OE number | 06F 103 235 |
| Additional Information 2 | with quick couplers |
| Type | Hose, cylinder head cover ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.45 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| for OE number | 1844.42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023