Important compatibility info
Resistor Type | Hot-wire Sensor |
Type | Mass Air Flow Sensor |
Weight | 0.041 kg |
Number of Connectors / Ports | 5 |
Function | Mass Air Flow Sensor |
Housing Type | without housing |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.234 kg |
Type | Sensor, headlight levelling |
Function | Sensor, headlight levelling |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1900 mm |
Function | Cable Pull, parking brake |
Weight | 0.95 kg |
Type | Cable Pull, parking brake |
Paired article numbers | 32464 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left |
Weight | 0.66 kg |
Length | 217 mm |
Thickness | 74 mm |
Spanner Size | 19 |
Paired article numbers | 42235 |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Placement on Vehicle | Rear, Front, Lower, Front Axle Left, Front Axle Right |
Outer diameter | 40 mm |
Thickness | 82 mm |
Inner diameter | 18 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.96 kg |
Function | Ball Joint |
External Thread Size | M16 x 1,5, M10 x 1,25 |
Cone Size | 20 mm |
Mounting points diameter | 10.5 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.35 kg |
Material | Steel |
Length | 270 mm |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.020 kg |
Number of Connectors / Ports | 10 |
Function | Steering Angle Sensor |
Voltage | 12 V |
Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.4 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 302 mm |
Thickness | 66 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.6 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 20.1 kg |
Placement on Vehicle | Rear Axle |
Steering arm type | Triangular Control Arm (CV) |
Wishbone Angle Measurement | 47 ° |
Pipe Diameter | 48 mm |
Mounting points diameter | 23 mm. 25 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.065 kg |
Type | Rubber Buffer, suspension |
Placement on Vehicle | Front Axle |
Length | 85 mm |
Width | 62 mm |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Bearing Type | Rolling Bearing |
Type | Suspension, propshaft |
Inner diameter | 30 mm |
Width | 36 mm |
Outer diameter | 55 mm |
Thickness | 106 mm |
Additional Information 2 | with ball bearing |
Function | Suspension, propshaft |
Hole Spacing | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.194 kg |
for OE number | 10921-AA080 |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.280 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 148 |
Function | Timing Chain Kit |
for OE number | 55 352 124 |
Type | Timing Chain Kit |
Additional Information | with slide rails, with chain tensioner |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33043)
- 1x Febi Tensioner, timing chain (33044)
- 1x Febi Guide, timing chain (106667)
- 1x Febi Guide, timing chain (173887)
- 1x Febi Guide, timing chain (173890)
- 1x Febi Oil Jet, timing chain (174153)
- 2x Febi Gear/Sprocket, camshaft (175738)
- 1x Febi Sprocket, crankshaft (174669)
- 2x Febi Bolt, camshaft gear (172269)
- 2x Febi Screw (33067)
- 2x Febi Screw (33068)
- 2x Febi Screw (33069)
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 6 |
Lock System | with double sealing |
Placement on Vehicle | Left Rear |
Additional Information | with adjuster |
Paired article numbers | 178971 |
Weight | 0.656 kg |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 7.4 mm |
Weight | 0.027 kg |
Length | 59 mm |
Material | Plastic |
Number of Connectors / Ports | 4 |
Function | Sensor, intake manifold pressure |
for OE number | 12 35 029 |
Type | Sensor, intake manifold pressure |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.450 kg |
Bore Diameter | 16 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.245 kg |
Outer diameter | 390 mm |
Voltage | 12 V |
Rated Power | 260 W |
Number of Wings | 7 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Function | Ring Gear, crankshaft |
Inner diameter | 30 mm |
Outer diameter | 100 mm |
Thickness | 9.8 mm |
Type | Ring Gear, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 12 mm |
Outer diameter | 32 mm |
Thickness | 21 mm |
Placement on Vehicle | Front Axle |
Weight | 0.026 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023