Important compatibility info
Piston Diameter | 19.1 mm |
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 200 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Weight | 2.195 kg |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 22 mm |
Number of Teeth | 105 |
Belts | with rounded tooth profile |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Replaces | 173152 |
Weight | 2.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31061)
- 1x Febi Water Pump, engine cooling (173147)
Important compatibility info
Function | Seal Kit, multi-valve |
Weight | 0.064 kg |
Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Gasket, air compressor (35700)
- 1x Febi Seal, air compressor (35701)
- 1x Febi Seal Kit, multi-valve (35702)
- 1x Febi Seal Kit, multi-valve (35704)
- 1x Febi Seal, air compressor (35731)
- 1x Febi Seal, air compressor (35725)
Important compatibility info
Weight | 0.015 kg |
Outer diameter | 7.5 mm |
Thickness | 34.3 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 005 153 72 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Weight | 1.89 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 145 mm |
Cone Size | 28.6 mm |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Placement on Vehicle | both sides |
Length | 666 mm |
Housing Diameter | 18 mm |
Eject Force | 290 N |
Stroke | 256 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 369 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 26646 |
Mounting points diameter | 12 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.310 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 450 mm |
Thickness | 130 mm |
Number of Connectors / Ports | 2 |
Rated Power | 130 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Weight | 2.69 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.474 kg |
Inner diameter | 16.3 mm |
Thickness | 60 mm |
Outer diameter | 66 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 14 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Cable Length | 150 mm |
Weight | 0.042 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Length | 1231 mm |
Weight | 0.107 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with retaining ring |
Inner diameter | 38 mm |
Weight | 0.671 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Outer diameter | 72 mm |
Width | 37 mm |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 164 mm |
Function | Air Filter |
Height | 55 mm |
Filter type | Filter Insert |
Weight | 0.388 kg |
Type | Air Filter |
Length | 259 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left Rear |
Weight | 0.224 kg |
Length | 45 mm |
Material | Rubber/Metal |
Outer diameter | 54.5 mm. 68.5 mm |
Inner diameter | 18 mm |
Paired article numbers | 08946 |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.36 kg |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Thickness | 55 mm |
Outer diameter | 63 mm |
Placement on Vehicle | Lower Front Axle, Rear |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 72 mm |
Width | 72 mm |
Material | Rubber/Metal |
Thickness | 63 mm |
Inner diameter | 22 mm |
Weight | 0.230 kg |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.169 kg |
Type | Camshaft |
Placement on Vehicle | Intake Side |
Function | Camshaft |
for OE number | 2 431 073 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.57 kg |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M12 x 1,5 |
Length | 159 mm |
Thickness | 88 mm |
Spanner Size | 19 |
Paired article numbers | 42710 |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.65 kg |
Rim Hole Number | 4 -Hole |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 280 mm |
Thickness | 43.2 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 60 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023