Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 1828 mm |
| Placement on Vehicle | Front |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.357 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.96
Important compatibility info
| Length | 69 mm |
| Material | Copper |
| Outer diameter | 27 mm |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 7 mm |
| Function | Sleeve, nozzle holder |
| Weight | 0.059 kg |
| Type | Sleeve, nozzle holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.96
Important compatibility info
| Cable Length | 870 mm |
| Type | Sensor, wheel speed |
| Weight | 0.06 kg |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.96
Important compatibility info
| Length | 205 mm |
| Height | 50 mm |
| Width | 145 mm |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.282 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.96
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 120 mm |
| Paired article numbers | 32867 |
| Cone Size | 22 mm |
| Function | Tie Rod End |
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Extra Description | ProKit |
| Thread Type | with left-hand thread |
| Weight | 1.16 kg |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.96
Important compatibility info
| Min. Length | 187 mm |
| Pipe Diameter | 50 mm. 41 mm |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
| Replaces | 03892 |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 0.93 kg |
| Operating Mode | Mechanical |
| Max. Length | 244 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Function | Mounting, transfer case |
| Type | Mounting, transfer case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Type | Valve, fuel supply system |
| Valve type | Breather Valve |
| Weight | 0.06 kg |
| External Thread Size | M10 x 1 |
| Function | Valve, fuel supply system |
| Length | 53 mm |
| Spanner Size | 17 |
| Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Weight | 0.276 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Weight | 0.138 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 109513 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1030 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Weight | 0.137 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 107471 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Cable Length | 1080 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Weight | 1.419 kg |
| Function | Repair Kit, spring bolt |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (45048)
- 1x Febi Bush, spring eye (46798)
- 1x Febi Bush, spring eye (47599)
- 1x Febi Grease Nipple (01095)
- 2x Febi Seal Ring (12583)
£20.98
Important compatibility info
| Weight | 1.280 kg |
| Placement on Vehicle | Rear Axle |
| Length | 123.2 mm |
| Width | 63.6 mm. 61.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.8 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.98
Important compatibility info
| Outer diameter | 128 mm |
| Thickness | 45.5 mm |
| Inner diameter | 78 mm |
| Weight | 0.3 kg |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.98
Important compatibility info
| Weight | 1.800 kg |
| Placement on Vehicle | Front Axle |
| Length | 141.8 mm |
| Width | 56.8 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm. 18 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.98
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front |
| Function | Mounting, engine |
| Weight | 1.515 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.98
Important compatibility info
| Weight | 0.741 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 75 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with axle nut |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (22953)
£20.99
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Weight | 0.429 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Paired article numbers | 185936 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 185941 |
| Weight | 0.432 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Outer diameter | 104 mm |
| Inner diameter | 52 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.707 kg |
| Placement on Vehicle | Front Axle |
| Length | 77 mm |
| Material | Rubber/Metal |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 45 mm |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Weight | 0.885 kg |
| Additional Information 2 | with bolts/screws, with retaining ring |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (01891)
- 3x Febi Screw (01589)
- 1x Febi Bolt, brake disc (01893)
- 1x Febi Nut (05031)
- 1x Febi Nut (05038)
- 1x Febi Circlip (04903)
£20.99
Important compatibility info
| Weight | 0.215 kg |
| Length | 252 mm |
| Eject Force | 1180 N |
| Stroke | 72 mm |
| Housing length | 152.5 mm |
| Piston conrod diameter | 10 mm |
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Housing Diameter | 22 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Weight | 0.273 kg |
| Placement on Vehicle | both sides |
| Length | 557 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Stroke | 200 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 324 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Weight | 0.134 kg |
| Colour | Black |
| Number of Connectors / Ports | 6 |
| Combi Switch Function | with board computer function, with wipe-wash function, with rear wipe-wash function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Function | Air Filter |
| Inner diameter | 92 mm |
| Filter type | Filter Insert |
| Height | 385 mm |
| Outer diameter | 107 mm |
| Type | Air Filter |
| Weight | 0.243 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Weight | 0.080 kg |
| Cable Length | 726 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Weight | 0.74 kg |
| Material | Rubber/Metal |
| Replaces | 104641 |
| Placement on Vehicle | Front Axle, Upper |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (39133)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
£21.00
Important compatibility info
| Weight | 0.095 kg |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Outer diameter | 89.4 mm |
| Bolt Head/Nut Design | Male Hex |
| Spanner Size | 32 |
| Height | 58.6 mm |
| Manufacturer's restriction oil filter housing | Purflux |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Length | 246 mm |
| Height | 30 mm |
| Width | 206 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Weight | 0.516 kg |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 470 mm |
| Material | PBT |
| Additional Information 2 | with integrated wiper blade, with cover |
| Colour | Black |
| Weight | 0.182 kg |
| Type | Wiper Arm, window cleaning |
| Function | Wiper Arm, window cleaning |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Paired article numbers | 48005 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 119 mm |
| Material | Steel |
| External Thread Size | M12 x 1,5 |
| Weight | 0.001 kg |
| Outer diameter | 12 mm |
| Spanner Size | 18 |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| for OE number | 123 410 10 81 S1 |
| Weight | 0.545 kg |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (05263)
£21.01
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 8 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.259 kg |
| Length | 1908 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Paired article numbers | 09599 |
| Placement on Vehicle | Rear Axle Left |
| Function | Wheel Brake Cylinder |
| Material | Grey Cast Iron |
| Internal Thread Size | M12 x 1 |
| Type | Wheel Brake Cylinder |
| Weight | 0.4 kg |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Weight | 0.670 kg |
| Placement on Vehicle | Left Front, Right Front |
| Length | 135 mm |
| Width | 85 mm |
| Thickness | 78 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 169 240 14 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156 mm |
| Width | 74.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 2.1 kg |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1655 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.485 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Weight | 0.037 kg |
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 0.288 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
| Paired article numbers | 193829 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 0.508 kg |
| for OE number | 06 84 294 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 2650 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1200 Ohm |
| Cable Length | 2500 mm |
| Weight | 0.160 kg |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Weight | 0.9 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (01876)
- 1x Febi Rolling Bearing, suspension strut support mount (01365)
£21.03
Important compatibility info
| Weight | 0.158 kg |
| Height | 15 mm |
| Outer diameter | 52 mm |
| Inner diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Weight | 0.055 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 106470 |
| Number of Connectors / Ports | 2 |
| Cable Length | 780 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Inner diameter | 17 mm |
| Type | Bushing, axle beam |
| Weight | 0.521 kg |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 84 mm |
| Outer diameter | 94 mm |
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Weight | 0.85 kg |
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Kit, multi-valve (35735)
- 1x Febi Seal, air compressor (35736)
- 1x Febi Seal, air compressor (35737)
- 3x Febi Seal Kit, multi-valve (35733)
- 3x Febi Pressure Limiting Valve (35774)
- 3x Febi Nut (35732)
£21.03
Important compatibility info
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
| Outer diameter | 67 mm |
| Additional Information 2 | with seal ring |
| Seal Diameter | 95 mm |
| Function | Fuel filter |
| Height | 199 mm |
| Weight | 0.154 kg |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Repair Kit, suspension strut support mount |
| Weight | 0.68 kg |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, without ball bearing |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (26725)
- 2x Febi Screw (37958)
- 1x Febi Nut (37957)
£21.03
Important compatibility info
| Weight | 0.345 kg |
| Function | Pump, fuel pre-supply |
| Type | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Housing Diameter | 18 mm |
| Eject Force | 440 N |
| Stroke | 177 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 382.5 mm |
| Weight | 0.290 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023