Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 304 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.72
Important compatibility info
| Height | 93.5 mm |
| Outer diameter | 98 mm |
| Additional Information 2 | with seal ring |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.72
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 17 |
| Material | Steel |
| Thickness | 75 mm |
| Diameter | 1 mm |
| Length | 201 mm |
| Paired article numbers | 175656 |
| Rod/Strut | Panhard Rod |
| Thread Length | 26 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.72
Important compatibility info
| Material | Rubber/Metal |
| Function | Gasket, oil sump |
| Gasket Design | Metal Elastomer Gasket |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Width 1 | 27 mm |
| Width | 29.3 mm |
| Material | Plastic |
| Outer diameter | 54 mm |
| Inner diameter | 10.4 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width 2 | 29.3 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Thickness | 80 mm |
| Function | Tie Rod End |
| Spanner Size | 19 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Length | 94 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Replaces | 41318 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| External Teeth, Wheel Side | 33 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 22 |
| Thread Size | M22x1,5 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Height | 141 mm |
| Outer diameter | 71 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 11 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 81.5 mm |
| Gasket inner diameter | 75.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Mounting points diameter | 20 mm |
| Width of castor bearing surface | 42 mm |
| Material | Metal |
| Outer diameter | 74 mm |
| Inner diameter | 20 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of grooves | 19 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Water pump impeller material | Metal |
| Replaces | 18428; 24356; 30962; 32919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35747)
- 1x Febi Seal, air compressor (35745)
- 3x Febi Sleeve, compressed-air tank strap (35776)
- 1x Febi Seal Kit, multi-valve (35746)
- 2x Febi Screw (35755)
£20.74
Important compatibility info
| Thickness/Strength 1 | 17.5 mm |
| Function | Brake Pad Set, disc brake |
| Width | 58.5 mm. 60.9 mm |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with fastening material |
| Length | 136.8 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 107468 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1030 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Length | 2308 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 240 mm |
| Width | 52 mm |
| Material | PU (Polyurethane) |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (172107)
- 2x Febi Rubber Buffer, suspension (172245)
£20.74
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (179509)
- 2x Febi Protective Cap/Bellow, shock absorber (44509)
£20.74
Important compatibility info
| Inner diameter | 12.2 mm |
| Placement on Vehicle | Rear Axle Left, Upper, inner, Rear Axle Right |
| Thickness | 45 mm |
| Outer diameter | 34.1 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Opening Temperature | 82 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Outer diameter | 56 mm |
| for OE number | MD310106 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 5 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 3 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 1.5 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Additional Information 2 | with top |
| Additional Information | for multi-plate clutch |
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Outer diameter | 45.8 mm |
| Clutch ID | Haldex Gen II |
| Filter type | Filter Insert |
| Height | 55 mm |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Inner diameter | 12 mm |
| Extra Description | febi Plus |
| Gasket outer diameter | 51 mm |
| Gasket inner diameter | 45 mm |
| External Thread Size | M48 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
Important compatibility info
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Internal Thread Size | M18 x 1,5 |
| Material | PU (Polyurethane) |
| Outer diameter | 100 mm |
| Number of Coils | 20 |
| DIN / ISO | 74323 |
| Colour | Yellow |
| Type | Spiral Hose |
| Length | 630 mm |
| Inner diameter | 85 mm |
| Function | Spiral Hose |
| Working length | 4 m |
| Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 90 mm |
| Paired article numbers | 170538 |
| Function | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 171551 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 171550 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Material | Plastic |
| Outer diameter | 135 mm |
| Inner diameter | 30 mm |
| Thickness | 18 mm |
| Function | Belt Pulley, power steering pump |
| Extra Description | febi Plus |
| Type | Belt Pulley, power steering pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 85.2 mm |
| Width | 46.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.77
Important compatibility info
| Number of Teeth, ABS ring | 26 |
| Internal Teeth, wheel side | 30 |
| Placement on Vehicle | Front Axle Left, Wheel Side |
| ABS Ring Diameter | 85 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 21 |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.77
Important compatibility info
| Placement on Vehicle | Front |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 292 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.77
Important compatibility info
| Outer diameter | 95 mm |
| Thickness | 63 mm |
| Colour | Blue |
| Function | Sealing Cap, tank unit (Urea injection) |
| Type | Sealing Cap, tank unit (Urea injection) |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.78
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Inner diameter 2 | 101 mm |
| Inner diameter 1 | 33 mm |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Paired article numbers | 174420 |
| Length | 117 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174373)
- 1x Febi High Temperature Lubricant (03630)
£20.78
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle |
| Length | 87 mm |
| Material | Thermoplast |
| Paired article numbers | 174400 |
| Inner diameter 1 | 33 mm |
| Inner diameter 2 | 104 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174397)
- 1x Febi Molybdenum Grease (02582)
£20.78
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 168 mm |
| Width | 40 mm |
| Thickness | 70 mm |
| Spanner Size | 22 |
| Paired article numbers | 33702 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 140 mm |
| Width | 60 mm. 59 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 363 mm |
| Outer diameter | 149 mm |
| Function | Suspension Spring |
| Wire Diameter | 12 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.79
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 112.1 mm |
| Width | 42.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.79
Important compatibility info
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 332 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (28313)
- 1x Febi Clamping Clip (38762)
- 1x Febi Cable Tie (07027)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Molybdenum Grease (02582)
£20.80
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 490 mm |
| Housing Diameter | 19 mm |
| Eject Force | 650 N |
| Stroke | 184 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.80
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Placement on Vehicle | Upper |
| Inner diameter | 38 mm |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.80
Important compatibility info
| Width | 25 mm |
| Outer diameter | 178 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 4 mm |
| Function | Brake Shoe Set, parking brake |
| Placement on Vehicle | Rear Axle |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.81
Important compatibility info
| Paired article numbers | 180225 |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Length | 535 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.81
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 28285-27401 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.81
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 100.6 mm |
| Width | 44 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.9 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.82
Important compatibility info
| Function | Bolt, release fork |
| Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
£20.82
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 548 mm |
| Housing Diameter | 22 mm |
| Eject Force | 520 N |
| Stroke | 193 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 318 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.82
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.82
Important compatibility info
| Colour | black |
| Number of Connectors / Ports | 3 |
| Type | Pressure Switch, air conditioning |
| Function | Pressure Switch, air conditioning |
| Connector Shape | round |
| for OE number | 4 673 935 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.82
Important compatibility info
| Filter type | Filter Insert, with housing cover |
| Type | Hydraulic Filter Kit, automatic transmission |
| Outer diameter | 53 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information | with gasket/seal |
| Height | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.82
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 467 mm |
| Housing Diameter | 18 mm |
| Eject Force | 455 N |
| Stroke | 172 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 264.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023