Important compatibility info
Weight | 1.58 kg |
Placement on Vehicle | Front Axle |
Length | 146 mm |
Width | 55 mm |
Additional Information 2 | with piston clip, with anti-squeak plate |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.6 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16332; 16617; 16618 |
Brake System | ATE |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 28285-27401 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 100.6 mm |
Width | 44 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.9 mm |
Function | Brake Pad Set, disc brake |
Weight | 0.880 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.016 kg |
Function | Bolt, release fork |
Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
Important compatibility info
Weight | 0.226 kg |
Placement on Vehicle | both sides |
Length | 467 mm |
Housing Diameter | 18 mm |
Eject Force | 455 N |
Stroke | 172 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 264.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | both sides |
Length | 548 mm |
Housing Diameter | 22 mm |
Eject Force | 520 N |
Stroke | 193 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 318 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Type | Pressure Switch, air conditioning |
Function | Pressure Switch, air conditioning |
Weight | 0.016 kg |
for OE number | 4 673 935 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2245 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Weight | 0.229 kg |
Type | V-Ribbed Belt |
Replaces | 29016 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.640 kg |
Placement on Vehicle | Front Axle |
Length | 119 mm |
Width | 67.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Weight | 0.518 kg |
Placement on Vehicle | Front Axle |
for OE number | 48331-0D030 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (180840)
- 2x Febi Protective Cap/Bellow, shock absorber (182943)
Important compatibility info
Weight | 0.626 kg |
Placement on Vehicle | Front Axle |
Width | 37 mm |
Outer diameter | 66 mm |
Inner diameter | 34.5 mm |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (08023)
- 1x Febi Circlip (04019)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Wheel Bearing (39158)
- 1x Febi Nut (39159)
Important compatibility info
Weight | 0.262 kg |
Placement on Vehicle | Left |
Length | 543 mm |
Housing Diameter | 18 mm |
Eject Force | 310 N |
Stroke | 220 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 297 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 200 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Height | 49 mm |
Width | 200 mm |
Additional Information 2 | with oil sump gasket |
Weight | 0.284 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Weight | 0.63 kg |
Placement on Vehicle | Front Axle Left |
Length | 182 mm |
Width | 38 mm |
Thickness | 91 mm |
Paired article numbers | 43239 |
Spanner Size | 19 |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Type | Tie Rod End |
Bolt / Nut Version | with plain washer |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Weight | 0.192 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (181277)
- 2x Febi Protective Cap/Bellow, shock absorber (174199)
Important compatibility info
Internal Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 215 mm |
Paired article numbers | 12684 |
Thread Type | with right-hand thread |
Function | Tie Rod End |
Type | Tie Rod End |
Weight | 0.725 kg |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Left |
Weight | 0.364 kg |
Length | 384 mm |
Height | 103 mm |
Width | 298 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 84 mm |
External Thread Size | M16 x 1,5 |
Filter type | In-Line Filter |
Internal Thread Size | M16 x 1,5 |
Weight | 0.340 kg |
Type | Fuel filter |
Length | 169 mm |
Function | Fuel filter |
Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cap, fuel tank |
Colour | Black |
Outer diameter | 91 mm. 80 mm |
Weight | 0.311 kg |
Type | Cap, fuel tank |
Additional Information | with gasket/seal |
Lockable | Lockable |
Lock System | with two keys, with lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Filter type | Filter Insert |
Placement on Vehicle | Front, Right |
Length | 198 mm |
Height | 103 mm |
Width | 194 mm |
Inner diameter | 127 mm |
Function | Air Filter |
Weight | 0.364 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023