Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.062 kg |
Number of Connectors / Ports | 2 |
Cable Length | 932 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
for OE number | 96318238 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.76 kg |
Width | 20 mm |
Outer diameter | 47 mm |
Inner diameter | 18 mm. 12 mm |
Paired article numbers | 36821 |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 27 |
Internal Teeth, wheel side | 23 |
Weight | 1.934 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 1 | 48 mm |
Inner diameter 2 | 53 mm |
Outer diameter 1 | 58 mm |
Outer diameter 2 | 63 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Weight | 0.224 kg |
Placement on Vehicle | Charge Air Cooler, Right |
Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rolling Bearing, suspension strut support mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Rolling Bearing, suspension strut support mount |
Material | Plastic |
Thickness | 44 mm |
Outer diameter 1 | 130 mm |
Weight | 0.340 kg |
Outer diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.391 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Outer diameter | 64 mm |
Thickness | 10.5 mm |
Inner diameter | 16 mm |
Function | Shaft Seal, manual transmission |
Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5, M42 x 1,5 |
Weight | 0.824 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Ball Joint |
Cone Size | 44.5 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 108.9 mm |
Width | 42 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.8 mm |
Function | Brake Pad Set, disc brake |
Weight | 0.91 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.59 kg |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 80.5 mm |
Thickness | 68 mm |
Inner diameter | 19 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 69 mm |
Filter type | Filter Insert |
Type | Fuel filter |
Weight | 0.163 kg |
Function | Fuel filter |
Inner diameter | 49 mm |
Seal Diameter | 130.5 mm |
Additional Information 2 | with seal ring |
Outer diameter | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.087 kg |
Function | Rocker Arm, engine timing |
Type | Rocker Arm, engine timing |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rocker Arm, engine timing (05828)
- 1x Febi Thrust Piece, intake/exhaust valve (06573)
- 1x Febi Adjusting Disc, valve clearance (05174)
- 1x Febi Bolt, rocker arm shaft (05173)
- 1x Febi Counter Nut, valve clearance adjusting screw (05176)
Important compatibility info
Weight | 0.61 kg |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing |
Inner diameter | 42 mm |
Outer diameter | 75 mm |
Width | 37 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Weight | 0.157 kg |
Placement on Vehicle | Front Axle Left |
Length | 475 mm |
Spanner Size | 11 |
Paired article numbers | 170262 |
Thread Length | 15.5 mm. 11.4 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 25 mm |
Opening Temperature | 90 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Weight | 0.09 kg |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.076 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1198 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Radiator Hose |
Function | Radiator Hose |
Cooling Hose | from coolant regulator housing to engine cooler |
Weight | 0.65 kg |
Inner diameter | 31 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Placement on Vehicle | Upper, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.218 kg |
Paired article numbers | 177154 |
Length | 267 mm |
Height | 37 mm |
Width | 218 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Placement on Vehicle | Front, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 171547 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.209 kg |
Filter type | Filter Insert |
Placement on Vehicle | Front, Left |
Additional Information 2 | with pre-filter |
Length | 267 mm |
Height | 37 mm |
Width | 218 mm |
Paired article numbers | 177153 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, inner, Front Axle Right, Lower, Rear |
Material | Rubber/Metal |
Outer diameter | 51 mm |
Thickness | 115 mm |
Weight | 0.223 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.399 kg |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Thickness | 82 mm |
Inner diameter | 22 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.069 kg |
Placement on Vehicle | Front Axle |
Length | 139 mm |
Width | 79.8 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.715 kg |
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 185 mm. 210 mm |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37094)
- 1x Febi Nut (36331)
Important compatibility info
Weight | 0.06 kg |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Outer diameter | 33 mm |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Placement on Vehicle | Front Axle |
External Thread Size | M8 x 1,25 |
for OE number | 1 377 973 S1 |
Material | Rubber/Metal |
Weight | 1.010 kg |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34918)
- 1x Febi Rolling Bearing, suspension strut support mount (45037)
Important compatibility info
Steering arm type | Control Arm |
Weight | 1.35 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter | 10 mm. 27 mm |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Outer diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 50 mm |
Placement on Vehicle | Rear, Upper, inner, Rear Axle Right, Rear Axle Left |
Function | Mounting, control/trailing arm |
Inner diameter | 12.1 mm |
Weight | 0.133 kg |
Type | Mounting, control/trailing arm |
Outer diameter | 50.2 mm |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023