Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Weight | 1.457 kg |
Thickness/Strength 1 | 15.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle |
Length | 126.8 mm |
Width | 53.1 mm |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.025 kg |
Spanner Size | 12 |
Voltage | 11 V |
Glow Plug Type | after-glow capable |
Fitting Depth | 24.5 mm |
Length | 73 mm |
External Thread Size | M12 x 1,25 |
Function | Glow Plug |
Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 106 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 82 mm |
Inner diameter 2 | 29 mm |
Weight | 0.171 kg |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (185940)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.570 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 24 mm |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with nut, with screw |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (34164)
- 1x Febi Clamping Bolt, ball joint (40524)
- 1x Febi Nut (45945)
Important compatibility info
Internal Thread Size | M8 x 1,25 |
Length | 164 mm |
Material | Rubber/Metal |
Outer diameter | 83 mm |
Inner diameter | 13 mm |
Paired article numbers | 27456 |
Placement on Vehicle | Front Axle Left |
Weight | 0.880 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 59 mm |
Width | 151 mm |
Additional Information 2 | without ball bearing |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.516 kg |
Replaces | 09465; 29971; 30630 |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Number of mounting bores | 4 |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 180 mm |
Width | 60 mm |
Material | PU (Polyurethane), Plastic |
Function | Dust Cover Kit, shock absorber |
Weight | 0.15 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23586)
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
Important compatibility info
Weight | 0.196 kg |
Length | 152.3 mm |
Outer diameter | 92.5 mm |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
for OE number | 022 103 483 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.100 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 37730 |
Function | Tie Rod |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29223)
- 1x Febi Inner Tie Rod (28541)
Important compatibility info
Weight | 1.100 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 37729 |
Function | Tie Rod |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29224)
- 1x Febi Inner Tie Rod (28541)
Important compatibility info
Weight | 0.140 kg |
Placement on Vehicle | Front Axle Right, Rear Axle Right |
Length | 57.8 mm |
Paired article numbers | 30488 |
Function | Repair Kit, automatic adjustment |
Type | Repair Kit, automatic adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5 |
Weight | 0.7 kg |
Function | Tie Rod End |
Spanner Size | 22 |
Paired article numbers | 41085 |
Placement on Vehicle | Front Axle Right |
Length | 146 mm |
Thickness | 117 mm |
Extra Description | ProKit |
External Thread Size | M14 x 1,25 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mount, exhaust system |
Placement on Vehicle | Front |
Material | MVQ (silicone rubber), Steel |
Type | Mount, exhaust system |
Weight | 0.520 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.295 kg |
Function | Hydraulic Filter Kit, automatic transmission |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information 2 | with oil sump gasket |
Length | 214.5 mm |
Height | 61 mm |
Width | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Lock System | with key |
Function | Lock Cylinder, ignition lock |
Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clock Spring, airbag |
Number of Connectors / Ports | 5. 6. 4 |
Weight | 0.137 kg |
Type | Clock Spring, airbag |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Lower |
Length | 153 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.69 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Diameter | 1 mm |
Length | 70 mm |
Material | Steel |
Paired article numbers | 194951 |
Additional Information | with nuts |
Thread Length | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.476 kg |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 106.5 mm |
Width | 48.7 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 1.142 kg |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023